[U-Boot] [PATCH v2 07/29] ARM: i.MX6QP: sabresd: Add initial devicetree support

[Jagan Teki]

On Tue, Apr 4, 2017 at 12:46 AM, Fabio Estevam <festevam at gmail.com> wrote:
> On Mon, Apr 3, 2017 at 10:53 AM, Jagan Teki <jagan at openedev.com> wrote:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> Add initial dts support for i.MX6 Quad Plus Sabresd board.
>>
>> Boot from MMC:
>> -------------
>> U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29)
>> Trying to boot from MMC1
>>
>> U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530)
>>
>> CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
>> CPU:   Automotive temperature grade (-40C to 125C) at 29C
>> Reset cause: POR
>> Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board
>> Board: MX6-SabreSD
>> I2C:   ready
>> DRAM:  1 GiB
>> PMIC:  PFUZE100 ID=0x10
>> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
>> *** Warning - bad CRC, using default environment
>>
>> gpio at 020a4000: dir_output: error: gpio GPIO3_19 not reserved
>> gpio at 020a4000: set_value: error: gpio GPIO3_19 not reserved
>> gpio at 020b4000: dir_output: error: gpio GPIO7_12 not reserved
>> gpio at 020b4000: set_value: error: gpio GPIO7_12 not reserved
>
> Do you plan to fix these errors?

Yes the subsequent patches are fixing these, see 0000-cover-letter for
final u-boot print.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.