[U-Boot] [PATCH 1/3] net: fec: do not access reserved register for i.MX6ULL

[Stefano Babic]

On 18/04/2017 15:39, Peng Fan wrote:
> Hi Stefano,
> 
>> -----Original Message-----
>> From: Stefano Babic [mailto:sbabic at denx.de]
>> Sent: Thursday, April 13, 2017 12:22 AM
>> To: Peng Fan <peng.fan at nxp.com>; joe.hershberger at ni.com
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [PATCH 1/3] net: fec: do not access reserved register for
>> i.MX6ULL
>>
>> On 10/04/2017 13:44, Peng Fan wrote:
>>> The MIB RAM and FIFO receive start register does not exist on
>>> i.MX6ULL. Accessing these register will cause enet not work well or
>>> cause system report fault.
>>>
>>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>>> Cc: Joe Hershberger <joe.hershberger at ni.com>
>>> ---
>>>  drivers/net/fec_mxc.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index
>>> 910879b..ac7afb5 100644
>>> --- a/drivers/net/fec_mxc.c
>>> +++ b/drivers/net/fec_mxc.c
>>> @@ -563,7 +563,7 @@ static int fec_init(struct eth_device *dev, bd_t *bd)
>>>  	writel(0x00000000, &fec->eth->gaddr2);
>>>
>>>  	/* Do not access reserved register for i.MX6UL */
>>> -	if (!is_mx6ul()) {
>>> +	if (!is_mx6ul() && !is_mx6ull()) {
>>>  		/* clear MIB RAM */
>>>  		for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
>>>  			writel(0, i);
>>>
>>
>> Reviewed-by : Stefano Babic <sbabic at denx.de>
>>
>> Joe, I see Tom has assigned the series  to me. If it is ok for you, I will merge the
>> series into u-boot-imx.
> 
> Will you pick up this patch set?
> 


Yes, I pick it up. Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================