[U-Boot] AM335x Falcon Mode

[ayoub.zaki at embexus.com]

Hi Andy,

Thanks for the answer, I figured out what the problem is, in the fact I was using a zImage, using an uImage format solve the problem :-)
It should maybe added to the documentation ;-)

best regards,

Ayoub Zaki
On 20 April 2017 at 16:31:21 +02:00, Andy Pont <andy.pont at sdcsystems.com> wrote:

> Ayoub wrote...
> 
> 
> > => run args_mmc
> > => run loadimage
> > 8942296 bytes read in 610 ms (14 MiB/s)
> > => run loadfdt
> > 58129 bytes read in 56 ms (1013.7 KiB/s)
> > => spl export fdt ${loadaddr} - ${fdtaddr}
> > 
> I have AM335x Falcon mode running with SPI flash (albeit an old 2014.xx U-Boot version) and the commands for settings it up look the same as the ones you have used.
> 
> Do you get any more information about where the data abort is coming from if you build and run U-Boot with #define DEBUG?
> 
> -Andy.
> 
>