[U-Boot] AM335x Falcon Mode

[Heiko Schocher]

Hello Ayoub,

Am 20.04.2017 um 16:35 schrieb ayoub.zaki at embexus.com:
> Hi Andy,
>
> Thanks for the answer, I figured out what the problem is, in the fact I was using a zImage, using an uImage format solve the problem :-)
> It should maybe added to the documentation ;-)

Patches are welcome!

;-)

bye,
Heiko
>
> best regards,
>
> Ayoub Zaki
> On 20 April 2017 at 16:31:21 +02:00, Andy Pont <andy.pont at sdcsystems.com> wrote:
>
>> Ayoub wrote...
>>
>>
>>> => run args_mmc
>>> => run loadimage
>>> 8942296 bytes read in 610 ms (14 MiB/s)
>>> => run loadfdt
>>> 58129 bytes read in 56 ms (1013.7 KiB/s)
>>> => spl export fdt ${loadaddr} - ${fdtaddr}
>>>
>> I have AM335x Falcon mode running with SPI flash (albeit an old 2014.xx U-Boot version) and the commands for settings it up look the same as the ones you have used.
>>
>> Do you get any more information about where the data abort is coming from if you build and run U-Boot with #define DEBUG?
>>
>> -Andy.
>>
>>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany