[U-Boot] [PATCH 07/11] i2c: Drop use of CONFIG_I2C_HARD
Simon Glass
sjg at chromium.org
Sun Apr 23 15:35:21 UTC 2017
Drop use of this long-deprecated option.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
README | 16 ++++++++--------
board/ti/am335x/board.c | 6 +-----
board/ti/am43xx/board.c | 3 +--
cmd/eeprom.c | 2 --
common/board_f.c | 4 ++--
common/stdio.c | 5 +----
include/configs/PATI.h | 7 +++----
include/configs/am335x_evm.h | 5 -----
include/configs/am43xx_evm.h | 6 ------
scripts/config_whitelist.txt | 1 -
10 files changed, 16 insertions(+), 39 deletions(-)
diff --git a/README b/README
index f31bb3dffe..0bee478ec7 100644
--- a/README
+++ b/README
@@ -2214,7 +2214,9 @@ The following options need to be configured:
If you do not have i2c muxes on your board, omit this define.
-- Legacy I2C Support: CONFIG_HARD_I2C
+----under removal:
+
+- Legacy I2C Support: CONFIG_SOFT_I2C
NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
provides the following compelling advantages:
@@ -2223,14 +2225,12 @@ The following options need to be configured:
- approved multibus support
- better i2c mux support
- ** CONFIG_HARD_I2C is now being removed **
-
-----under removal:
+ ** CONFIG_SOFT_I2C is now being removed **
- In both cases you will need to define CONFIG_SYS_I2C_SPEED
- to be the frequency (in Hz) at which you wish your i2c bus
- to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
- the CPU's i2c node address).
+ With CONFIG_SOFT_I2C you will need to define
+ CONFIG_SYS_I2C_SPEED to be the frequency (in Hz) at which you
+ wish your i2c bus to run and CONFIG_SYS_I2C_SLAVE to be the
+ address of this node (ie the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx
(arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 3e842d3187..0d2e84011d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -67,11 +67,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifdef CONFIG_TI_I2C_BOARD_DETECT
void do_board_detect(void)
{
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-
- if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
- printf("ti_i2c_eeprom_init failed\n");
+ printf("ti_i2c_eeprom_init failed\n");
}
#endif
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 390cc168cd..a190893450 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -42,8 +42,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifdef CONFIG_TI_I2C_BOARD_DETECT
void do_board_detect(void)
{
- if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
- printf("ti_i2c_eeprom_init failed\n");
+ printf("ti_i2c_eeprom_init failed\n");
}
#endif
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index 0a0e4a2c1c..c9fde0d682 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -73,13 +73,11 @@ void eeprom_init(int bus)
#endif
/* I2C EEPROM */
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
#if defined(CONFIG_SYS_I2C)
if (bus >= 0)
i2c_set_bus_num(bus);
#endif
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
}
static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
diff --git a/common/board_f.c b/common/board_f.c
index d9431ee79a..eed3e7be2a 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -184,7 +184,7 @@ __weak int dram_init_banksize(void)
return 0;
}
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C)
static int init_func_i2c(void)
{
puts("I2C: ");
@@ -765,7 +765,7 @@ static const init_fnc_t init_sequence_f[] = {
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C)
init_func_i2c,
#endif
#if defined(CONFIG_HARD_SPI)
diff --git a/common/stdio.c b/common/stdio.c
index 4d30017530..ee4f0bda9e 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -21,7 +21,7 @@
#include <logbuff.h>
#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C)
#include <i2c.h>
#endif
@@ -346,9 +346,6 @@ int stdio_add_devices(void)
#ifdef CONFIG_SYS_I2C
i2c_init_all();
#else
-#if defined(CONFIG_HARD_I2C)
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
#endif
#ifdef CONFIG_DM_VIDEO
/*
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 2c048abba6..045aa0a720 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -39,7 +39,6 @@
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_BSP
-#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IRQ
#define CONFIG_BOOTCOMMAND "" /* autoboot command */
@@ -136,16 +135,16 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_ENV_IS_IN_EEPROM
#ifdef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_OFFSET 0
#define CONFIG_ENV_SIZE 2048
#endif
-#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SIZE 0x00002000 /* Set whole sector as env */
-#define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE) /* Environment starts at this adress */
+/* Environment starts at this adress */
+#define CONFIG_ENV_OFFSET ((0 - CONFIG_SYS_FLASH_BASE) - 2048)
#endif
#define CONFIG_SPI 1
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index fc8a08f5b7..5c1a6d64da 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -176,11 +176,6 @@
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
/* PMIC support */
#define CONFIG_POWER_TPS65217
#define CONFIG_POWER_TPS65910
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 1feb946834..ba185ebf5a 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -22,12 +22,6 @@
#define CONFIG_SYS_NS16550_SERIAL
#endif
-/* I2C Configuration */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
/* Power */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5e515d215c..d18497c448 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1196,7 +1196,6 @@ CONFIG_G_DNL_UMS_VENDOR_NUM
CONFIG_H264_FREQ
CONFIG_H8300
CONFIG_HALEAKALA
-CONFIG_HARD_I2C
CONFIG_HARD_SPI
CONFIG_HASH_VERIFY
CONFIG_HAS_DATAFLASH
--
2.12.2.816.g2cccc81164-goog
More information about the U-Boot
mailing list