[U-Boot] [PATCH v3 00/13] STiH410-B2260: add reset, usb and fastboot support

[Simon Glass]

Hi Patrice,

On 27 April 2017 at 05:30, Patrice CHOTARD <patrice.chotard at st.com> wrote:
>
> Hi
>
> It's just a gentle reminder as this series is present on mailing list
> since one month without any review.

I'll take a look at the phy uclass patch.

Who is the custodian for ST?

Regards,
Simon

>
> Thanks
>
> Patrice
>
> On 03/28/2017 06:03 PM, patrice.chotard at st.com wrote:
> > From: Patrice Chotard <patrice.chotard at st.com>
> >
> > This series adds :
> >       _ update existing sdhci driver to use reset framework
> >       _ add usb phy driver
> >       _ add ehci support
> >       _ add ohci support
> >       _ add xhci support
> >       _ add fastboot support
> >
> > With all this feature enable, it's now possible to
> >       _ boot on usb mass storage device
> >       _ boot from kernel image and dtb previously loaded using tftp
> >       _ update mmc partiton using fastboot
> >
> > v3:   _ remove reset driver (already applied on u-boot-dm tree by Simon
> >         Glass)
> >       _ patch 4: add new USB PHY uclass requested by Simon Glass
> >       _ patch 5: convert STi usb phy driver to new USB PHY uclass
> >       _ patch 6/7: update echi/ohci drivers to use USB PHY uclass
> >       _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded
> >         dwc3-sti (STi glue driver) which was not correct. Now we respect the device
> >         tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the
> >         xhci-sti driver.
> >
> > v2:   _ add Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com> in patches 2,3 and 4
> >       _ fix remarks done by Marek Vasut :
> >               _ patch 5 : replace bitfield_replace() by clrsetbits_le32()
> >               _ patch 6 : update error messages and add remove callback
> >               _ patch 8 : put board specific defines in a separate patch
> >               _ patch 7: use setbits_le32() instead of read, modify, write
> >                 sequence and add missing parenthesis
> >               _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21
> >                 in patch 14
> >
> > Patrice Chotard (13):
> >   mmc: sti_sdhci: Rework sti_mmc_core_config()
> >   ARM: dts: stih410-family: Add missing reset_names for mmc1 node
> >   mmc: sti_sdhci: Use reset framework
> >   dm: usb: Add a uclass for USB PHY
> >   usb: phy: Add STi USB2 PHY
> >   usb: ehci: Add STi ehci support
> >   usb: ohci: Add STi ohci support
> >   usb: xhci: Add STi xhci support
> >   usb: dwc3: Add dwc3 glue driver support for STi
> >   board: STiH410-B2260: add OHCI and XHCI related defines
> >   board: STiH410-B2260: add fastboot support
> >   STiH410-B2260: enable USB Host Networking
> >   STiH410-B2260: enable USB, fastboot, reset related flags
> >
> >  arch/arm/dts/stih407-family.dtsi                 |   1 +
> >  arch/arm/include/asm/arch-stih410/sys_proto.h    |  11 +
> >  board/st/stih410-b2260/board.c                   |  44 ++++
> >  configs/stih410-b2260_defconfig                  |  36 ++-
> >  doc/device-tree-bindings/phy/phy-stih407-usb.txt |  24 ++
> >  doc/device-tree-bindings/usb/dwc3-st.txt         |  60 +++++
> >  drivers/mmc/sti_sdhci.c                          |  60 +++--
> >  drivers/usb/Kconfig                              |   4 +
> >  drivers/usb/host/Kconfig                         |  26 +++
> >  drivers/usb/host/Makefile                        |   3 +
> >  drivers/usb/host/dwc3-sti-glue.c                 | 278 +++++++++++++++++++++++
> >  drivers/usb/host/ehci-sti.c                      | 116 ++++++++++
> >  drivers/usb/host/ohci-sti.c                      |  93 ++++++++
> >  drivers/usb/host/xhci-sti.c                      | 114 ++++++++++
> >  drivers/usb/phy/Kconfig                          |  19 ++
> >  drivers/usb/phy/Makefile                         |   2 +
> >  drivers/usb/phy/sti_usb_phy.c                    | 181 +++++++++++++++
> >  drivers/usb/phy/usb_phy_uclass.c                 |  90 ++++++++
> >  include/configs/stih410-b2260.h                  |  16 ++
> >  include/dm/uclass-id.h                           |   1 +
> >  include/dwc3-sti-glue.h                          |  43 ++++
> >  include/usb_phy-uclass.h                         |  42 ++++
> >  include/usb_phy.h                                | 112 +++++++++
> >  23 files changed, 1350 insertions(+), 26 deletions(-)
> >  create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h
> >  create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt
> >  create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt
> >  create mode 100644 drivers/usb/host/dwc3-sti-glue.c
> >  create mode 100644 drivers/usb/host/ehci-sti.c
> >  create mode 100644 drivers/usb/host/ohci-sti.c
> >  create mode 100644 drivers/usb/host/xhci-sti.c
> >  create mode 100644 drivers/usb/phy/Kconfig
> >  create mode 100644 drivers/usb/phy/sti_usb_phy.c
> >  create mode 100644 drivers/usb/phy/usb_phy_uclass.c
> >  create mode 100644 include/dwc3-sti-glue.h
> >  create mode 100644 include/usb_phy-uclass.h
> >  create mode 100644 include/usb_phy.h
> >