[U-Boot] [PATCH v3 00/13] STiH410-B2260: add reset, usb and fastboot support

[Patrice CHOTARD]

Hi Simon

On 04/27/2017 05:45 PM, Simon Glass wrote:
> Hi Patrice,
>
> On 27 April 2017 at 05:30, Patrice CHOTARD <patrice.chotard at st.com> wrote:
>>
>> Hi
>>
>> It's just a gentle reminder as this series is present on mailing list
>> since one month without any review.
>
> I'll take a look at the phy uclass patch.

ok thank you

>
> Who is the custodian for ST?

I think nobody.

Vipin Kumar <vipin.kumar at st.com> was ST custodian for STMicroelectronics 
SPEAR architecture.

I tried to contact him, got no response, and not sure he was still 
employed by ST.

Patrice



>
> Regards,
> Simon
>
>>
>> Thanks
>>
>> Patrice
>>
>> On 03/28/2017 06:03 PM, patrice.chotard at st.com wrote:
>>> From: Patrice Chotard <patrice.chotard at st.com>
>>>
>>> This series adds :
>>>       _ update existing sdhci driver to use reset framework
>>>       _ add usb phy driver
>>>       _ add ehci support
>>>       _ add ohci support
>>>       _ add xhci support
>>>       _ add fastboot support
>>>
>>> With all this feature enable, it's now possible to
>>>       _ boot on usb mass storage device
>>>       _ boot from kernel image and dtb previously loaded using tftp
>>>       _ update mmc partiton using fastboot
>>>
>>> v3:   _ remove reset driver (already applied on u-boot-dm tree by Simon
>>>         Glass)
>>>       _ patch 4: add new USB PHY uclass requested by Simon Glass
>>>       _ patch 5: convert STi usb phy driver to new USB PHY uclass
>>>       _ patch 6/7: update echi/ohci drivers to use USB PHY uclass
>>>       _ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded
>>>         dwc3-sti (STi glue driver) which was not correct. Now we respect the device
>>>         tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the
>>>         xhci-sti driver.
>>>
>>> v2:   _ add Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com> in patches 2,3 and 4
>>>       _ fix remarks done by Marek Vasut :
>>>               _ patch 5 : replace bitfield_replace() by clrsetbits_le32()
>>>               _ patch 6 : update error messages and add remove callback
>>>               _ patch 8 : put board specific defines in a separate patch
>>>               _ patch 7: use setbits_le32() instead of read, modify, write
>>>                 sequence and add missing parenthesis
>>>               _ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21
>>>                 in patch 14
>>>
>>> Patrice Chotard (13):
>>>   mmc: sti_sdhci: Rework sti_mmc_core_config()
>>>   ARM: dts: stih410-family: Add missing reset_names for mmc1 node
>>>   mmc: sti_sdhci: Use reset framework
>>>   dm: usb: Add a uclass for USB PHY
>>>   usb: phy: Add STi USB2 PHY
>>>   usb: ehci: Add STi ehci support
>>>   usb: ohci: Add STi ohci support
>>>   usb: xhci: Add STi xhci support
>>>   usb: dwc3: Add dwc3 glue driver support for STi
>>>   board: STiH410-B2260: add OHCI and XHCI related defines
>>>   board: STiH410-B2260: add fastboot support
>>>   STiH410-B2260: enable USB Host Networking
>>>   STiH410-B2260: enable USB, fastboot, reset related flags
>>>
>>>  arch/arm/dts/stih407-family.dtsi                 |   1 +
>>>  arch/arm/include/asm/arch-stih410/sys_proto.h    |  11 +
>>>  board/st/stih410-b2260/board.c                   |  44 ++++
>>>  configs/stih410-b2260_defconfig                  |  36 ++-
>>>  doc/device-tree-bindings/phy/phy-stih407-usb.txt |  24 ++
>>>  doc/device-tree-bindings/usb/dwc3-st.txt         |  60 +++++
>>>  drivers/mmc/sti_sdhci.c                          |  60 +++--
>>>  drivers/usb/Kconfig                              |   4 +
>>>  drivers/usb/host/Kconfig                         |  26 +++
>>>  drivers/usb/host/Makefile                        |   3 +
>>>  drivers/usb/host/dwc3-sti-glue.c                 | 278 +++++++++++++++++++++++
>>>  drivers/usb/host/ehci-sti.c                      | 116 ++++++++++
>>>  drivers/usb/host/ohci-sti.c                      |  93 ++++++++
>>>  drivers/usb/host/xhci-sti.c                      | 114 ++++++++++
>>>  drivers/usb/phy/Kconfig                          |  19 ++
>>>  drivers/usb/phy/Makefile                         |   2 +
>>>  drivers/usb/phy/sti_usb_phy.c                    | 181 +++++++++++++++
>>>  drivers/usb/phy/usb_phy_uclass.c                 |  90 ++++++++
>>>  include/configs/stih410-b2260.h                  |  16 ++
>>>  include/dm/uclass-id.h                           |   1 +
>>>  include/dwc3-sti-glue.h                          |  43 ++++
>>>  include/usb_phy-uclass.h                         |  42 ++++
>>>  include/usb_phy.h                                | 112 +++++++++
>>>  23 files changed, 1350 insertions(+), 26 deletions(-)
>>>  create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h
>>>  create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt
>>>  create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt
>>>  create mode 100644 drivers/usb/host/dwc3-sti-glue.c
>>>  create mode 100644 drivers/usb/host/ehci-sti.c
>>>  create mode 100644 drivers/usb/host/ohci-sti.c
>>>  create mode 100644 drivers/usb/host/xhci-sti.c
>>>  create mode 100644 drivers/usb/phy/Kconfig
>>>  create mode 100644 drivers/usb/phy/sti_usb_phy.c
>>>  create mode 100644 drivers/usb/phy/usb_phy_uclass.c
>>>  create mode 100644 include/dwc3-sti-glue.h
>>>  create mode 100644 include/usb_phy-uclass.h
>>>  create mode 100644 include/usb_phy.h
>>>