[U-Boot] [PATCH 3/3] spl: dfu: reduce spl-dfu MLO size

[B, Ravi]

Hi Tom

>> 
>> Yes you are correct. 
>> But what is happening here is, the CONFIG_DFU_<MMC/NAND/SF/TFTP> selected through Kconfig/Menuconfig is applicable for both SPL and U-Boot.
>> Hence CONFIG_DFU_MMC/NAND/SF gets compiled for SPL as well, which needs run_command(). Actually CONFIG_DFU_MMC/NAND/etc is not scoped for SPL-DFU.
>> As we have aligned, not to increase the SPL size, user shall use SPL-DFU feature to boot to u-boot, then utilize the full featured DFU to flash MMC/NAND/SF.
>> 
>> I get undefined reference to common function run_command(),  "dfu_fill_entitiy_<mmc/nand/sf>" in driver/dfu/dfu.c. 
>> The dfu.c is common for both SPL-DFU and U-boot.

>OK.  I think we need to introduce SPL_DFU_xxx Kconfig options, and use
>CONFIG_IS_ENABLED(DFU_xxx) so that we will get things enabled/disabled (and discarded) as needed.

Ok, will do.

Regards
Ravi