[U-Boot] [PATCH 2/3] rockchip: set Pre-reloc malloc pool size to 4kb for rk3368 based boards

[Andy Yan]

Hi Philipp:


On 2017年08月02日 21:25, Dr. Philipp Tomsich wrote:
>> On 02 Aug 2017, at 15:10, Andy Yan <andy.yan at rock-chips.com> wrote:
>>
>> The default 1kb pre-reloc malloc pool is not enough for dm
>> core to enable the dm-pre-reloc device drivers.
>>
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> —
> Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>
> See comment below.
>
>> configs/evb-px5_defconfig      | 1 +
>> configs/geekbox_defconfig      | 1 +
>> configs/sheep-rk3368_defconfig | 1 +
>> 3 files changed, 3 insertions(+)
>>
>> diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig
>> index dae5094..72e492f 100644
>> --- a/configs/evb-px5_defconfig
>> +++ b/configs/evb-px5_defconfig
>> @@ -1,5 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_ROCKCHIP=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x1000
> We even increased this to 0x2000 for TPL/SPL on the lion-board (i.e. RK3368-uQ7).
> Should we just make 0x2000 the default for RK3368 (in Kconfig) and reduce the noise in defconfig?

I have no problem with it.

>
>> CONFIG_ROCKCHIP_RK3368=y
>> CONFIG_TARGET_EVB_PX5=y
>> CONFIG_DEFAULT_DEVICE_TREE="rk3368-px5-evb"
>> diff --git a/configs/geekbox_defconfig b/configs/geekbox_defconfig
>> index a1944b4..0fd89d2 100644
>> --- a/configs/geekbox_defconfig
>> +++ b/configs/geekbox_defconfig
>> @@ -1,5 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_ROCKCHIP=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x1000
>> CONFIG_ROCKCHIP_RK3368=y
>> CONFIG_TARGET_GEEKBOX=y
>> CONFIG_DEFAULT_DEVICE_TREE="rk3368-geekbox"
>> diff --git a/configs/sheep-rk3368_defconfig b/configs/sheep-rk3368_defconfig
>> index be00fad..da6b93a 100644
>> --- a/configs/sheep-rk3368_defconfig
>> +++ b/configs/sheep-rk3368_defconfig
>> @@ -1,5 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_ROCKCHIP=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x1000
>> CONFIG_ROCKCHIP_RK3368=y
>> CONFIG_DEFAULT_DEVICE_TREE="rk3368-sheep"
>> CONFIG_DEBUG_UART=y
>> -- 
>> 2.7.4
>>
>>
>
>
>