[U-Boot] [PATCH v1 7/7] apalis/colibri_imx6: enable SDP by default

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Enable Serial Download Protocol (SDP) in SPL and U-Boot. This is
useful to make use of imx_usb to download the complete U-Boot
(u-boot.img) after SPL has been downloaded. The U-Boot command
sdp allows to enumerate as SDP capable device again, e.g. to
download a Linux kernel and/or U-Boot script.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Acked-by: Max Krummenacher <max.krummenacher at toradex.com>
---

 configs/apalis_imx6_defconfig  | 4 ++++
 configs/colibri_imx6_defconfig | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 4d88e70200..2a271f002c 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Apalis iMX6 # "
 CONFIG_CMD_BOOTZ=y
@@ -31,6 +34,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index a23975f858..d5d3e7a143 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Colibri iMX6 # "
 CONFIG_CMD_BOOTZ=y
@@ -31,6 +34,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
-- 
2.13.3