[U-Boot] [PATCH v1 6/7] apalis/colibri_imx6: use independent USB PID for SPL

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Use a completely independent USB Product ID for SPL. This allows
to differentiate a SDP running in SPL and SDP running in a U-Boot
which could not read the config block successfully.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Acked-by: Max Krummenacher <max.krummenacher at toradex.com>
---

 board/toradex/apalis_imx6/apalis_imx6.c   | 13 +++++++++++++
 board/toradex/colibri_imx6/colibri_imx6.c | 13 +++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 8e5613cb12..edaca5d346 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -28,6 +28,7 @@
 #include <dm/platform_data/serial_mxc.h>
 #include <dm/platdata.h>
 #include <fsl_esdhc.h>
+#include <g_dnl.h>
 #include <i2c.h>
 #include <imx_thermal.h>
 #include <linux/errno.h>
@@ -1233,6 +1234,18 @@ void reset_cpu(ulong addr)
 {
 }
 
+#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	unsigned short usb_pid;
+
+	usb_pid = TORADEX_USB_PRODUCT_NUM_OFFSET + 0xfff;
+	put_unaligned(usb_pid, &dev->idProduct);
+
+	return 0;
+}
+#endif
+
 #endif
 
 static struct mxc_serial_platdata mxc_serial_plat = {
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index cbf7aa952a..0cc958a0a8 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -28,6 +28,7 @@
 #include <dm/platform_data/serial_mxc.h>
 #include <dm/platdata.h>
 #include <fsl_esdhc.h>
+#include <g_dnl.h>
 #include <i2c.h>
 #include <imx_thermal.h>
 #include <linux/errno.h>
@@ -1118,6 +1119,18 @@ void reset_cpu(ulong addr)
 {
 }
 
+#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	unsigned short usb_pid;
+
+	usb_pid = TORADEX_USB_PRODUCT_NUM_OFFSET + 0xfff;
+	put_unaligned(usb_pid, &dev->idProduct);
+
+	return 0;
+}
+#endif
+
 #endif
 
 static struct mxc_serial_platdata mxc_serial_plat = {
-- 
2.13.3