[U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes

[Stefan Roese]

Hi Joe,

On 11.07.2017 10:04, Stefan Roese wrote:
> On 21.06.2017 10:31, stefanc at malvell.com wrote:
>> From: Stefan Chulski <stefanc at marvell.com>
>>
>> Issues were found during internal QA phase.
>>
>> Stefan Chulski (10):
>>    net: mvpp2x: Add GPIO configuration support
>>    net: mvpp2x: fix phy connected to wrong mdio issue
>>    net: mvpp2x: Enable GoP packet padding in TX
>>    net: mvpp2x: fix BM configuration overrun issue
>>    net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
>>    net: mvpp2x: remove MBUS configurations from MvPP22 driver
>>    net: mvpp2x: Remove IRQ configuration from u-boot
>>    net: mvpp2x: Set BM pool high address
>>    net: mvpp2x: remove TX drain from transmit routine
>>    net: mvpp2x: Set BM poll size once during priv probe
>>
>>   drivers/net/mvpp2.c | 189 
>> ++++++++++++++++++++++++++--------------------------
>>   1 file changed, 94 insertions(+), 95 deletions(-)
> 
> Joe, do you have any comments on these mvpp2 patches?

Gently ping on these patches again. Joe, do you have any comments
on these? Do you want to take these patches via your tree? Or
should I push them if you don't have any objections?

Thanks,
Stefan