[U-Boot] [PATCH v1] imx: remove SATA boot mode for i.MX 6UL and 6ULL

Stefano Babic sbabic at denx.de
Tue Aug 29 16:46:33 UTC 2017


Hi Stefan,

On 29/08/2017 18:10, Stefan Agner wrote:
> From: Stefan Agner <stefan.agner at toradex.com>
> 
> The NXP i.MX 6UL and 6ULL do not support SATA and have no SATA
> boot mode, hence remove it from the boot device detecion. This
> fixes a build error introduced with 3bd1642d4d50 ("imx: fix USB
> boot mode detection for i.MX 6UL and 6ULL")
> 
> Fixes: 3bd1642d4d50 ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL")
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> ---
> 
>  arch/arm/mach-imx/spl.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
> index bcd1033fdb..3853e7739d 100644
> --- a/arch/arm/mach-imx/spl.c
> +++ b/arch/arm/mach-imx/spl.c
> @@ -45,8 +45,10 @@ u32 spl_boot_device(void)
>  	case IMX6_BMODE_RESERVED:
>  		return BOOT_DEVICE_BOARD;
>  	/* SATA: See 8.5.4, Table 8-20 */
> +#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL)
>  	case IMX6_BMODE_SATA:
>  		return BOOT_DEVICE_SATA;
> +#endif
>  	/* Serial ROM: See 8.5.5.1, Table 8-22 */
>  	case IMX6_BMODE_SERIAL_ROM:
>  		/* BOOT_CFG4[2:0] */
> 

Reviewed-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list