[U-Boot] [PATCH v1] imx: remove SATA boot mode for i.MX 6UL and 6ULL

[Jagan Teki]

On Tue, Aug 29, 2017 at 10:16 PM, Stefano Babic <sbabic at denx.de> wrote:
> Hi Stefan,
>
> On 29/08/2017 18:10, Stefan Agner wrote:
>> From: Stefan Agner <stefan.agner at toradex.com>
>>
>> The NXP i.MX 6UL and 6ULL do not support SATA and have no SATA
>> boot mode, hence remove it from the boot device detecion. This
>> fixes a build error introduced with 3bd1642d4d50 ("imx: fix USB
>> boot mode detection for i.MX 6UL and 6ULL")
>>
>> Fixes: 3bd1642d4d50 ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL")
>> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
>> ---
>>
>>  arch/arm/mach-imx/spl.c | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
>> index bcd1033fdb..3853e7739d 100644
>> --- a/arch/arm/mach-imx/spl.c
>> +++ b/arch/arm/mach-imx/spl.c
>> @@ -45,8 +45,10 @@ u32 spl_boot_device(void)
>>       case IMX6_BMODE_RESERVED:
>>               return BOOT_DEVICE_BOARD;
>>       /* SATA: See 8.5.4, Table 8-20 */
>> +#if !defined(CONFIG_MX6UL) && !defined(CONFIG_MX6ULL)
>>       case IMX6_BMODE_SATA:
>>               return BOOT_DEVICE_SATA;
>> +#endif
>>       /* Serial ROM: See 8.5.5.1, Table 8-22 */
>>       case IMX6_BMODE_SERIAL_ROM:
>>               /* BOOT_CFG4[2:0] */
>>
>
> Reviewed-by: Stefano Babic <sbabic at denx.de>

Reviewed-by: Jagan Teki <jagan at openedev.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.