[U-Boot] [PATCH 2/2] ARM: Add a new arch + board for QEMU's 'virt' machine
Tuomas Tynkkynen
tuomas.tynkkynen at iki.fi
Wed Aug 30 08:31:35 UTC 2017
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:
qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
- u-boot.bin loaded and executing in the emulated flash at address 0x0
- A generated device tree blob placed at the start of RAM
- A freely configurable amount of RAM, described by the DTB
- A PL011 serial port, discoverable via the DTB
- An ARMv7 architected timer
- PSCI for rebooting the system
- A generic ECAM-based PCI host controller, discoverable via the DTB
Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:
- To enable a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
- To enable an Intel E1000 network adapter, pass e.g.:
-net nic,model=e1000 -net user
- To add an EHCI-compliant USB host controller, pass e.g.:
-device usb-ehci,id=ehci
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
---
arch/arm/Kconfig | 10 ++++++++
arch/arm/mach-qemu/Kconfig | 9 +++++++
board/qemu-arm/Makefile | 5 ++++
board/qemu-arm/qemu-arm.c | 35 ++++++++++++++++++++++++++
configs/qemu_arm_defconfig | 27 ++++++++++++++++++++
include/configs/qemu-arm.h | 63 ++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 149 insertions(+)
create mode 100644 arch/arm/mach-qemu/Kconfig
create mode 100644 board/qemu-arm/Makefile
create mode 100644 board/qemu-arm/qemu-arm.c
create mode 100644 configs/qemu_arm_defconfig
create mode 100644 include/configs/qemu-arm.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 53d0831935..0d01ba1b73 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -630,6 +630,14 @@ config ARCH_MX5
select CPU_V7
select BOARD_EARLY_INIT_F
+config ARCH_QEMU
+ bool "QEMU Virtual Platform"
+ select CPU_V7
+ select ARCH_SUPPORT_PSCI
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
@@ -1149,6 +1157,8 @@ source "arch/arm/mach-stm32/Kconfig"
source "arch/arm/mach-sunxi/Kconfig"
+source "arch/arm/mach-qemu/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-uniphier/Kconfig"
diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
new file mode 100644
index 0000000000..89d2a36719
--- /dev/null
+++ b/arch/arm/mach-qemu/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_QEMU
+
+config SYS_BOARD
+ default "qemu-arm"
+
+config SYS_CONFIG_NAME
+ default "qemu-arm"
+
+endif
diff --git a/board/qemu-arm/Makefile b/board/qemu-arm/Makefile
new file mode 100644
index 0000000000..3e9907d983
--- /dev/null
+++ b/board/qemu-arm/Makefile
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y += qemu-arm.o
diff --git a/board/qemu-arm/qemu-arm.c b/board/qemu-arm/qemu-arm.c
new file mode 100644
index 0000000000..90d7badbf4
--- /dev/null
+++ b/board/qemu-arm/qemu-arm.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017 Tuomas Tynkkynen
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ if (fdtdec_setup_memory_size() != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+void *board_fdt_blob_setup(void)
+{
+ /* QEMU loads a generated DTB for us at the start of RAM. */
+ return (void *)CONFIG_SYS_SDRAM_BASE;
+}
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
new file mode 100644
index 0000000000..d34512dd0d
--- /dev/null
+++ b/configs/qemu_arm_defconfig
@@ -0,0 +1,27 @@
+CONFIG_ARM=y
+CONFIG_ARM_SMCCC=y
+CONFIG_ARCH_QEMU=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_OF_BOARD=y
+CONFIG_AHCI_PCI=y
+CONFIG_BLK=y
+# CONFIG_MMC is not set
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_ECAM_GENERIC=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_PCI=y
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
new file mode 100644
index 0000000000..2bcc0efad0
--- /dev/null
+++ b/include/configs/qemu-arm.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2017 Tuomas Tynkkynen
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+/* Physical memory map */
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+
+/* The DTB generated by QEMU is placed at start of RAM, stay away from there */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
+#define CONFIG_SYS_MALLOC_LEN SZ_16M
+
+/* QEMU's PL011 serial port is detected via FDT using the device model */
+#define CONFIG_PL01X_SERIAL
+
+/* QEMU implements a 62.5MHz architected timer */
+/* FIXME: can we rely on CNTFREQ instead of hardcoding this fact here? */
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK 62500000
+
+/* Command prompt options */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+/* For block devices, QEMU emulates an ICH9 AHCI controller over PCI */
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 8
+#define CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
+
+/* Environment options */
+#define CONFIG_ENV_SIZE SZ_64K
+
+#include <config_distro_defaults.h>
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(SCSI, scsi, 0)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_PREBOOT "pci enum"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr=0x40000000\0" \
+ "scriptaddr=0x40200000\0" \
+ "pxefile_addr_r=0x40300000\0" \
+ "kernel_addr_r=0x40400000\0" \
+ "ramdisk_addr_r=0x44000000\0" \
+ BOOTENV
+
+#endif /* __CONFIG_H */
--
2.13.0
More information about the U-Boot
mailing list