[U-Boot] [PATCH v5 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

Ashish Kumar Ashish.Kumar at nxp.com
Thu Aug 31 10:42:53 UTC 2017


The QorIQ LS1088A processor is built on the Layerscape
architecture combining eight ARM A53 processor cores
with advanced, high-performance datapath acceleration
and networks, peripheral interfaces required for
networking, wireless infrastructure, and general-purpose
embedded applications.

LS1088A is compliant with the Layerscape Chassis Generation 3.

Features summary:
 - Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
 - Cores are in 2 cluster of 4-cores each
 - Cache coherent interconnect (CCI-400)
 - One 64-bit DDR4 SDRAM memory controller with ECC
 - Data path acceleration architecture 2.0 (DPAA2)
 - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
 - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc

Signed-off-by: Alison Wang <alison.wang at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra at nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie at nxp.com>
---

v5:
No change

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig          |  35 +++++-
 arch/arm/cpu/armv8/fsl-layerscape/Makefile         |   4 +
 arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc   |  43 ++++++-
 .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c    |  19 ++++
 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 +++++++++++++++++++++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |   1 +
 arch/arm/dts/fsl-ls1088a.dtsi                      |  78 +++++++++++++
 arch/arm/include/asm/arch-fsl-layerscape/config.h  |  62 +++++++++-
 arch/arm/include/asm/arch-fsl-layerscape/cpu.h     |   4 +
 .../include/asm/arch-fsl-layerscape/fsl_serdes.h   |   3 +-
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  11 ++
 arch/arm/include/asm/arch-fsl-layerscape/soc.h     |   4 +
 .../asm/arch-fsl-layerscape/stream_id_lsch3.h      |  14 +++
 drivers/ddr/fsl/util.c                             |   2 +-
 drivers/net/ldpaa_eth/Makefile                     |   1 +
 drivers/net/ldpaa_eth/ls1088a.c                    |  87 ++++++++++++++
 16 files changed, 482 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
 create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi
 create mode 100644 drivers/net/ldpaa_eth/ls1088a.c

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index eb8ccd1..aa2d0d1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -50,6 +50,29 @@ config ARCH_LS1046A
 	select BOARD_EARLY_INIT_F
 	imply SCSI
 
+config ARCH_LS1088A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LSCH3
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_ERRATUM_A009803
+	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A010165
+	select SYS_FSL_ERRATUM_A008511
+	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select FSL_TZASC_1
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+
 config ARCH_LS2080A
 	bool
 	select ARMV8_SET_SMPEN
@@ -100,7 +123,7 @@ config FSL_LSCH3
 
 config FSL_MC_ENET
 	bool "Management Complex network"
-	depends on ARCH_LS2080A
+	depends on ARCH_LS2080A || ARCH_LS1088A
 	default y
 	select RESV_RAM
 	help
@@ -116,6 +139,7 @@ config FSL_PCIE_COMPAT
 	default "fsl,ls1043a-pcie" if ARCH_LS1043A
 	default "fsl,ls1046a-pcie" if ARCH_LS1046A
 	default "fsl,ls2080a-pcie" if ARCH_LS2080A
+	default "fsl,ls1088a-pcie" if ARCH_LS1088A
 	help
 	  This compatible is used to find pci controller node in Kernel DT
 	  to complete fixup.
@@ -230,6 +254,7 @@ config MAX_CPUS
 	default 4 if ARCH_LS1043A
 	default 4 if ARCH_LS1046A
 	default 16 if ARCH_LS2080A
+	default 8 if ARCH_LS1088A
 	default 1
 	help
 	  Set this number to the maximum number of possible CPUs in the SoC.
@@ -261,10 +286,10 @@ config SYS_CCI400_OFFSET
 
 config SYS_FSL_IFC_BANK_COUNT
 	int "Maximum banks of Integrated flash controller"
-	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
 	default 4 if ARCH_LS1043A
 	default 4 if ARCH_LS1046A
-	default 8 if ARCH_LS2080A
+	default 8 if ARCH_LS2080A || ARCH_LS1088A
 
 config SYS_FSL_HAS_CCI400
 	bool
@@ -313,6 +338,7 @@ config SYS_FSL_PCLK_DIV
 	int "Platform clock divider"
 	default 1 if ARCH_LS1043A
 	default 1 if ARCH_LS1046A
+	default 1 if ARCH_LS1088A
 	default 2
 	help
 	  This is the divider that is used to derive Platform clock from
@@ -406,7 +432,8 @@ config SYS_FSL_ERRATUM_A009929
 config SYS_MC_RSV_MEM_ALIGN
 	hex "Management Complex reserved memory alignment"
 	depends on RESV_RAM
-	default 0x20000000
+	default 0x20000000 if ARCH_LS2080A
+	default 0x70000000 if ARCH_LS1088A
 	help
 	  Reserved memory needs to be aligned for MC to use. Default value
 	  is 512MB.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index e3ce018..115c3fc 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -38,3 +38,7 @@ endif
 ifneq ($(CONFIG_ARCH_LS1046A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
 endif
+
+ifneq ($(CONFIG_ARCH_LS1088A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index 3ae16ae..276ab90 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -1,11 +1,12 @@
 SoC overview
 
 	1. LS1043A
-	2. LS2080A
-	3. LS1012A
-	4. LS1046A
-	5. LS2088A
-	6. LS2081A
+	2. LS1088A
+	3. LS2080A
+	4. LS1012A
+	5. LS1046A
+	6. LS2088A
+	7. LS2081A
 
 LS1043A
 ---------
@@ -45,6 +46,38 @@ The LS1043A SoC includes the following function and features:
    - Integrated flash controller supporting NAND and NOR flash
  - QorIQ platform's trust architecture 2.1
 
+LS1088A
+--------
+The QorIQ LS1088A processor is built on the Layerscape
+architecture combining eight ARM A53 processor cores
+with advanced, high-performance datapath acceleration
+and networks, peripheral interfaces required for
+networking, wireless infrastructure, and general-purpose
+embedded applications.
+
+LS1088A is compliant with the Layerscape Chassis Generation 3.
+
+Features summary:
+ - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
+ - Cores are in 2 cluster of 4-cores each
+ - 1MB L2 - Cache per cluster
+ - Cache coherent interconnect (CCI-400)
+ - 1 64-bit DDR4 SDRAM memory controller with ECC
+ - Data path acceleration architecture 2.0 (DPAA2)
+ - 4-Lane 10GHz SerDes comprising of WRIOP
+ - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART)
+ - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
+ - QSPI, SPI, IFC2.0 supporting NAND, NOR flash
+ - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc
+ - 2 DUARTs
+ - 4 I2C, GPIO
+ - Thermal monitor unit(TMU)
+ - 4 Flextimers and 1 generic timer
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+   capabilities
+
 LS2080A
 --------
 The LS2080A integrated multicore processor combines eight ARM Cortex-A57
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index ef97556..179cac6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -28,6 +28,20 @@ __weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
 	return;
 }
 
+/*
+ *The return value of this func is the serdes protocol used.
+ *Typically this function is called number of times depending
+ *upon the number of serdes blocks in the Silicon.
+ *Zero is used to denote that no serdes was enabled,
+ *this is the case when golden RCW was used where DPAA2 bring was
+ *intentionally removed to achieve boot to prompt
+*/
+
+__weak int serdes_get_number(int serdes, int cfg)
+{
+	return cfg;
+}
+
 int is_serdes_configured(enum srds_prtcl device)
 {
 	int ret = 0;
@@ -73,6 +87,9 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 		printf("invalid SerDes%d\n", sd);
 		break;
 	}
+
+	cfg = serdes_get_number(sd, cfg);
+
 	/* Is serdes enabled at all? */
 	if (cfg == 0)
 		return -ENODEV;
@@ -99,6 +116,8 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 
 	cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
 	cfg >>= sd_prctl_shift;
+
+	cfg = serdes_get_number(sd, cfg);
 	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
 
 	if (!is_serdes_prtcl_valid(sd, cfg))
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
new file mode 100644
index 0000000..9f5cdd5
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u8 ip_protocol;
+	u8 lanes[SRDS_MAX_LANES];
+	u8 rcw_lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x12, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 3 }  },
+	{0x15, {SGMII3, SGMII7, XFI1, XFI2 }, {3, 3, 1, 1 } },
+	{0x16, {SGMII3, SGMII7, SGMII1, XFI2 }, {3, 3, 3, 1 } },
+	{0x17, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 2 } },
+	{0x18, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 2, 2 } },
+	{0x19, {SGMII3, QSGMII_B, XFI1, XFI2}, {3, 4, 1, 1 } },
+	{0x1A, {SGMII3, QSGMII_B, SGMII1, XFI2 }, {3, 4, 3, 1 } },
+	{0x1B, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 2 } },
+	{0x1C, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 2, 2 } },
+	{0x1D, {QSGMII_A, QSGMII_B, XFI1, XFI2 }, {4, 4, 1, 1 } },
+	{0x1E, {QSGMII_A, QSGMII_B, SGMII1, XFI2  }, {4, 4, 3, 1 } },
+	{0x1F, {QSGMII_A, QSGMII_B, SGMII1, SGMII2  }, {4, 4, 3, 2 } },
+	{0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } },
+	{0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } },
+	{0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } },
+	{0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } },
+		{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x0C, {PCIE1, PCIE1, PCIE1, PCIE1 }, {8, 8, 8, 8 } },
+	{0x0D, {PCIE1, PCIE2, PCIE3, SATA1 }, {5, 5, 5, 9 }  },
+	{0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 }  },
+	{0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 }  },
+	{0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 }  },
+	{0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 }  },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+int serdes_get_number(int serdes, int cfg)
+{
+	struct serdes_config *ptr;
+	int i, j, index, lnk;
+	int is_found, max_lane = SRDS_MAX_LANES;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+
+	while (ptr->ip_protocol) {
+		is_found = 1;
+		for (i = 0, j = max_lane - 1; i < max_lane; i++, j--) {
+			lnk = cfg & (0xf << 4 * i);
+			lnk = lnk >> (4 * i);
+
+			index = (serdes == FSL_SRDS_1) ? j : i;
+
+			if (ptr->rcw_lanes[index] == lnk && is_found)
+				is_found = 1;
+			else
+				is_found = 0;
+		}
+
+		if (is_found)
+			return ptr->ip_protocol;
+		ptr++;
+	}
+
+	return 0;
+}
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->ip_protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index e13f183..83e2871 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -24,6 +24,7 @@
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
+#include <fsl_immap.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
new file mode 100644
index 0000000..421d2de
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -0,0 +1,78 @@
+/*
+ * NXP ls1088a SOC common device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller at 6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial at 21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial at 21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	fsl_mc: fsl-mc at 80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+	};
+
+	dspi: dspi at 2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	qspi: quadspi at 1550000 {
+		compatible = "fsl,vf610-qspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+			<0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "QuadSPI", "QuadSPI-memory";
+		num-cs = <4>;
+	};
+};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 79e94f9..a7098be 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -116,6 +116,67 @@
 #define CONFIG_SYS_FSL_ERRATUM_A008751
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+#elif defined(CONFIG_ARCH_LS1088A)
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		3
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1 }
+#define CONFIG_GICV3
+#define CONFIG_FSL_TZPC_BP147
+#define CONFIG_FSL_TZASC_400
+#define CONFIG_SYS_PAGE_SIZE		0x10000
+
+#define	SRDS_MAX_LANES	4
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE				0x02200000
+#define TZPCR0SIZE_BASE				(TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE			(TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE			(TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE			(TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE			(TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE			(TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE			(TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			0x06000000
+#define GICR_BASE			0x06100000
+
+/* SMMU Defintions */
+#define SMMU_BASE			0x05000000 /* GR0 Base */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
+#define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE	0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
+
 #elif defined(CONFIG_FSL_LSCH2)
 #define CONFIG_SYS_FSL_OCRAM_BASE		0x10000000 /* initial RAM */
 #define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
@@ -218,7 +279,6 @@
 #define GICC_BASE		0x01420000
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
-
 #else
 #error SoC not defined
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index c4e5ecc..0126783 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -24,6 +24,10 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(LS1026A, LS1026A, 2),
 	CPU_TYPE_ENTRY(LS2040A, LS2040A, 4),
 	CPU_TYPE_ENTRY(LS1012A, LS1012A, 1),
+	CPU_TYPE_ENTRY(LS1088A, LS1088A, 8),
+	CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
+	CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
+	CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
 };
 
 #ifndef CONFIG_SYS_DCACHE_OFF
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index a8f9a50..a2c7578 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#ifdef CONFIG_ARCH_LS2080A
+#ifdef CONFIG_FSL_LSCH3
 enum srds_prtcl {
 	/*
 	 * Nobody will check whether the device 'NONE' has been configured,
@@ -158,6 +158,7 @@ void fsl_serdes_init(void);
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_get_number(int serdes, int cfg);
 
 #ifdef CONFIG_FSL_LSCH2
 const char *serdes_clock_to_string(u32 clock);
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 59410aa..99a7413 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -246,6 +246,17 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
 #define FSL_CHASSIS3_SRDS1_REGSR	29
 #define FSL_CHASSIS3_SRDS2_REGSR	29
+#elif defined(CONFIG_ARCH_LS1088A)
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK	0xFFFF0000
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT	16
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK	0x0000FFFF
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT	0
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	30
 #endif
 #define RCW_SB_EN_REG_INDEX	9
 #define RCW_SB_EN_MASK		0x00000400
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index aeb1273..ea8aced 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -57,6 +57,10 @@ struct cpu_type {
 #define SVR_LS1023A		0x879208
 #define SVR_LS1046A		0x870700
 #define SVR_LS1026A		0x870708
+#define SVR_LS1048A		0x870320
+#define SVR_LS1084A		0x870302
+#define SVR_LS1088A		0x870300
+#define SVR_LS1044A		0x870322
 #define SVR_LS2045A		0x870120
 #define SVR_LS2080A		0x870110
 #define SVR_LS2085A		0x870100
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index d7d527d..d1891c4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -66,12 +66,26 @@
 #define FSL_USB2_STREAM_ID		2
 #define FSL_SDMMC_STREAM_ID		3
 #define FSL_SATA1_STREAM_ID		4
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_SATA2_STREAM_ID		5
+#endif
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_DMA_STREAM_ID		6
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_DMA_STREAM_ID		5
+#endif
 
 /* PCI - programmed in PEXn_LUT */
 #define FSL_PEX_STREAM_ID_START		7
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_PEX_STREAM_ID_END		22
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_PEX_STREAM_ID_END		18
+#endif
+
 
 /* DPAA2 - set in MC DPC and alloced by MC */
 #define FSL_DPAA2_STREAM_ID_START	23
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
index 0a305b3..d6e6e78 100644
--- a/drivers/ddr/fsl/util.c
+++ b/drivers/ddr/fsl/util.c
@@ -390,7 +390,7 @@ void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
 
 void remove_unused_controllers(fsl_ddr_info_t *info)
 {
-#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_SYS_FSL_HAS_CCN504
 	int i;
 	u64 nodeid;
 	void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 08675ec..13ecd38 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -7,3 +7,4 @@
 obj-y += ldpaa_wriop.o
 obj-y += ldpaa_eth.o
 obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o
+obj-$(CONFIG_ARCH_LS1088A) += ls1088a.o
diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c
new file mode 100644
index 0000000..703945c
--- /dev/null
+++ b/drivers/net/ldpaa_eth/ls1088a.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <phy.h>
+#include <fsl-mc/ldpaa_wriop.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+
+u32 dpmac_to_devdisr[] = {
+	[WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1,
+	[WRIOP1_DPMAC2] = FSL_CHASSIS3_DEVDISR2_DPMAC2,
+	[WRIOP1_DPMAC3] = FSL_CHASSIS3_DEVDISR2_DPMAC3,
+	[WRIOP1_DPMAC4] = FSL_CHASSIS3_DEVDISR2_DPMAC4,
+	[WRIOP1_DPMAC5] = FSL_CHASSIS3_DEVDISR2_DPMAC5,
+	[WRIOP1_DPMAC6] = FSL_CHASSIS3_DEVDISR2_DPMAC6,
+	[WRIOP1_DPMAC7] = FSL_CHASSIS3_DEVDISR2_DPMAC7,
+	[WRIOP1_DPMAC8] = FSL_CHASSIS3_DEVDISR2_DPMAC8,
+	[WRIOP1_DPMAC9] = FSL_CHASSIS3_DEVDISR2_DPMAC9,
+	[WRIOP1_DPMAC10] = FSL_CHASSIS3_DEVDISR2_DPMAC10,
+};
+
+static int is_device_disabled(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 devdisr2 = in_le32(&gur->devdisr2);
+
+	return dpmac_to_devdisr[dpmac_id] & devdisr2;
+}
+
+void wriop_dpmac_disable(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	setbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+void wriop_dpmac_enable(int dpmac_id)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	clrbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtcl)
+{
+	enum srds_prtcl;
+
+	if (is_device_disabled(dpmac_id + 1))
+		return PHY_INTERFACE_MODE_NONE;
+
+	switch (lane_prtcl) {
+	case SGMII1:
+	case SGMII2:
+	case SGMII3:
+	case SGMII7:
+		return PHY_INTERFACE_MODE_SGMII;
+	}
+
+	if (lane_prtcl >= XFI1 && lane_prtcl <= XFI2)
+		return PHY_INTERFACE_MODE_XGMII;
+
+	if (lane_prtcl >= QSGMII_A && lane_prtcl <= QSGMII_B)
+		return PHY_INTERFACE_MODE_QSGMII;
+
+	return PHY_INTERFACE_MODE_NONE;
+}
+
+void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
+{
+	switch (lane_prtcl) {
+	case QSGMII_A:
+		wriop_init_dpmac(sd, 3, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 4, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 5, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 6, (int)lane_prtcl);
+		break;
+	case QSGMII_B:
+		wriop_init_dpmac(sd, 7, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 8, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 9, (int)lane_prtcl);
+		wriop_init_dpmac(sd, 10, (int)lane_prtcl);
+		break;
+	}
+}
-- 
2.7.4



More information about the U-Boot mailing list