[U-Boot] [PATCH v2 1/1] arm: sunxi: Allwinner A10 SPI driver

Stefan Mavrodiev stefan at olimex.com
Wed Dec 13 06:13:35 UTC 2017


On 12/13/2017 07:19 AM, Jagan Teki wrote:
> On Fri, Dec 8, 2017 at 5:08 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> On Fri, Dec 8, 2017 at 2:05 PM, Stefan Mavrodiev <stefan at olimex.com> wrote:
>>> Add spi driver for sun4i, sun5i and sun7i SoCs. The driver is
>>> adapted from mailine kernel (currently 4.15.0-rc1).
>>>
>>> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
>>> ---
>> Reviewed-by: Jagan Teki <jagan at openedev.com>
> Are you planning to send dts and configs changes for this? I'm enough
> confident to apply only when it tested.
>
> thanks!

I'm not sure I understand you.

I've made the test with Lime2, but the spi flash is optional in 
production. Thus I'm not sure if changes in the dts and config should be 
made.
I've tried pushing spi node to mainline kernel dts, but the patch wasn't 
accepted. https://patchwork.kernel.org/patch/10076721/

I can update sun4i, sun5i and sun7i dtsi files to add spi0_pins_b, if 
this is the point of your question.

Regards,
Stefan Mavrodiev



More information about the U-Boot mailing list