[U-Boot] [PATCH v2 1/1] arm: sunxi: Allwinner A10 SPI driver

[Jagan Teki]

On Wed, Dec 13, 2017 at 11:43 AM, Stefan Mavrodiev <stefan at olimex.com> wrote:
> On 12/13/2017 07:19 AM, Jagan Teki wrote:
>>
>> On Fri, Dec 8, 2017 at 5:08 PM, Jagan Teki <jagannadh.teki at gmail.com>
>> wrote:
>>>
>>> On Fri, Dec 8, 2017 at 2:05 PM, Stefan Mavrodiev <stefan at olimex.com>
>>> wrote:
>>>>
>>>> Add spi driver for sun4i, sun5i and sun7i SoCs. The driver is
>>>> adapted from mailine kernel (currently 4.15.0-rc1).
>>>>
>>>> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
>>>> ---
>>>
>>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>>
>> Are you planning to send dts and configs changes for this? I'm enough
>> confident to apply only when it tested.
>>
>> thanks!
>
>
> I'm not sure I understand you.
>
> I've made the test with Lime2, but the spi flash is optional in production.
> Thus I'm not sure if changes in the dts and config should be made.
> I've tried pushing spi node to mainline kernel dts, but the patch wasn't
> accepted. https://patchwork.kernel.org/patch/10076721/

Yes I've seen.

>
> I can update sun4i, sun5i and sun7i dtsi files to add spi0_pins_b, if this
> is the point of your question.

But it should accept Linux first for dts updates.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.