[U-Boot] [PATCH v2 1/1] arm: sunxi: Allwinner A10 SPI driver

[Stefan Mavrodiev]

On 12/13/2017 08:27 AM, Jagan Teki wrote:
> On Wed, Dec 13, 2017 at 11:43 AM, Stefan Mavrodiev <stefan at olimex.com> wrote:
>> On 12/13/2017 07:19 AM, Jagan Teki wrote:
>>> On Fri, Dec 8, 2017 at 5:08 PM, Jagan Teki <jagannadh.teki at gmail.com>
>>> wrote:
>>>> On Fri, Dec 8, 2017 at 2:05 PM, Stefan Mavrodiev <stefan at olimex.com>
>>>> wrote:
>>>>> Add spi driver for sun4i, sun5i and sun7i SoCs. The driver is
>>>>> adapted from mailine kernel (currently 4.15.0-rc1).
>>>>>
>>>>> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
>>>>> ---
>>>> Reviewed-by: Jagan Teki <jagan at openedev.com>
>>> Are you planning to send dts and configs changes for this? I'm enough
>>> confident to apply only when it tested.
>>>
>>> thanks!
>>
>> I'm not sure I understand you.
>>
>> I've made the test with Lime2, but the spi flash is optional in production.
>> Thus I'm not sure if changes in the dts and config should be made.
>> I've tried pushing spi node to mainline kernel dts, but the patch wasn't
>> accepted. https://patchwork.kernel.org/patch/10076721/
> Yes I've seen.
>
>> I can update sun4i, sun5i and sun7i dtsi files to add spi0_pins_b, if this
>> is the point of your question.
> But it should accept Linux first for dts updates.
>
> thanks!

I guess there won't be any changes in the device tree files as described 
here:
https://patchwork.kernel.org/patch/10109445/

Best regards,
Stefan Mavrodiev