[U-Boot] [PATCH 0/3] ARM: omap3: evm: Add OF_CONTROL support

[Derald D. Woods]

On Tue, Dec 26, 2017 at 11:14:55AM -0500, Tom Rini wrote:
> On Mon, Dec 25, 2017 at 09:34:03PM -0600, Derald D. Woods wrote:
> > On Sat, Dec 16, 2017 at 02:14:47PM -0600, Derald D. Woods wrote:
> > > This series adds OF_CONTROL support for TMDSEVM{3530,3730} and
> > > additionally updates ethaddr setup with smc911x initialization.
> > > 
> > > Devicetree files are taken from Linux v4.15-rc3. Note that this is the
> > > first addition of OMAP34XX devicetree files.
> > > 
> > > Tested using GCC 7.2.0 [--with-float=hard --with-mode=thumb]
> > > 
> > > --- 8< -----------------------------------------------------------------
> > > U-Boot SPL 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10)
> > > Trying to boot from MMC1
> > > reading u-boot.img
> > > reading u-boot.img
> > > 
> > > 
> > > U-Boot 2018.01-rc1-00177-g27f9740bcf (Dec 16 2017 - 13:13:10 -0600)
> > > 
> > > OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
> > > Model: TI OMAP35XX EVM (TMDSEVM3530)
> > > OMAP3 EVM board + LPDDR/NAND
> > > I2C:   ready
> > > DRAM:  256 MiB
> > > NAND:  256 MiB
> > > MMC:   OMAP SD/MMC: 0
> > > Read back SMSC id 0x92200000
> > > OMAP die ID: 265a002400000000040365fa1801b01f
> > > Net:   smc911x-0
> > > starting USB...
> > > USB0:   USB EHCI 1.00
> > > scanning bus 0 for devices... 1 USB Device(s) found
> > > Hit any key to stop autoboot:  0 
> > > OMAP3_EVM # echo $stdin;echo $stdout;echo $stderr
> > > serial at 4806a000
> > > serial at 4806a000
> > > serial at 4806a000
> > > --- 8< -----------------------------------------------------------------
> > > 
> > > 
> > > Derald D. Woods (3):
> > >   ARM: dts: omap3-evm: Add support for TMDSEVM{3530,3730}
> > >   ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530,3730}
> > >   ARM: omap3: evm: Refactor 'board_eth_init'
> > > 
> > >  arch/arm/dts/Makefile                           |   4 +
> > >  arch/arm/dts/omap-gpmc-smsc911x.dtsi            |  55 ++++++
> > >  arch/arm/dts/omap3-evm-37xx-u-boot.dtsi         |  29 ++++
> > >  arch/arm/dts/omap3-evm-37xx.dts                 | 110 ++++++++++++
> > >  arch/arm/dts/omap3-evm-common.dtsi              | 195 +++++++++++++++++++++
> > >  arch/arm/dts/omap3-evm-processor-common.dtsi    | 216 ++++++++++++++++++++++++
> > >  arch/arm/dts/omap3-evm-u-boot.dtsi              |  29 ++++
> > >  arch/arm/dts/omap3-evm.dts                      |  89 ++++++++++
> > >  arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi |  73 ++++++++
> > >  arch/arm/dts/omap34xx.dtsi                      |  84 +++++++++
> > >  arch/arm/mach-omap2/omap3/Kconfig               |   4 +
> > >  board/ti/evm/evm.c                              |  24 +--
> > >  configs/omap3_evm_defconfig                     |   9 +-
> > >  include/configs/omap3_evm.h                     |   2 -
> > >  14 files changed, 896 insertions(+), 27 deletions(-)
> > >  create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-37xx.dts
> > >  create mode 100644 arch/arm/dts/omap3-evm-common.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi
> > >  create mode 100644 arch/arm/dts/omap3-evm.dts
> > >  create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi
> > >  create mode 100644 arch/arm/dts/omap34xx.dtsi
> > > 
> > > -- 
> > > 2.15.1
> > > 
> > 
> > Ping. If there is any concern, please let me know and I will make
> > corrections. I plan to also update beagleboard and overo to use their
> > respective devicetree files. I would like to have these three OMAP34XX
> > boards, that I possess, to be near the same level of support. It will
> > help me to continue testing OMAP34XX stuff in general.
> 
> It's localized enough that it's your call, do you want it in for
> v2018.01 or .03?  Thanks!
> 

I would like it to land in v2018.01 if possible.

Derald