[U-Boot] [PATCH 2/7] board: Add STMicroelectronics STiH410-B2260 support
Antonio Borneo
borneo.antonio at gmail.com
Thu Feb 2 09:02:31 UTC 2017
On Fri, Jan 20, 2017 at 5:05 PM, <patrice.chotard at st.com> wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
Hi Patrice,
just some minor issue in the commit message
> This board is a 96Board based on STMicrolectronics
> STiH410 soc:
s/STMicrolectronics/STMicroelectronics/
s/soc/SoC/
maybe rework the whole sentence as:
This is a 96Board compliant board based on ...
> - 1GB DDR
> - On-Board USB combo WiFi/Bluetooth RTL8723BU
> with PCB soldered antenna
> - Ethernet 1000-BaseT
> - Sata
s/Sata/SATA/
> - HDMI
> - 2 x USB2 type A
USB2.0 ?
> - micro USB2 type AB
maybe "1x USB2.0 type micro-AB" ?
> - SD card slot
> - High speed connector (SD/I2C/USB interfaces)
> - Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
According to 96Board spec, it is named "low speed connector" or "low
speed expansion connector".
Antonio
>
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
> board/st/stih410-b2260/Kconfig | 19 +++++++++++++
> board/st/stih410-b2260/MAINTAINERS | 6 ++++
> board/st/stih410-b2260/Makefile | 8 ++++++
> board/st/stih410-b2260/board.c | 28 +++++++++++++++++++
> include/configs/stih410-b2260.h | 56 ++++++++++++++++++++++++++++++++++++++
> 5 files changed, 117 insertions(+)
> create mode 100644 board/st/stih410-b2260/Kconfig
> create mode 100644 board/st/stih410-b2260/MAINTAINERS
> create mode 100644 board/st/stih410-b2260/Makefile
> create mode 100644 board/st/stih410-b2260/board.c
> create mode 100644 include/configs/stih410-b2260.h
>
> diff --git a/board/st/stih410-b2260/Kconfig b/board/st/stih410-b2260/Kconfig
> new file mode 100644
> index 0000000..590add0
> --- /dev/null
> +++ b/board/st/stih410-b2260/Kconfig
> @@ -0,0 +1,19 @@
> +if TARGET_STIH410_B2260
> +
> +config SYS_BOARD
> + string
> + default "stih410-b2260"
> +
> +config SYS_VENDOR
> + string
> + default "st"
> +
> +config SYS_SOC
> + string
> + default "stih410"
> +
> +config SYS_CONFIG_NAME
> + string
> + default "stih410-b2260"
> +
> +endif
> diff --git a/board/st/stih410-b2260/MAINTAINERS b/board/st/stih410-b2260/MAINTAINERS
> new file mode 100644
> index 0000000..e78c69a
> --- /dev/null
> +++ b/board/st/stih410-b2260/MAINTAINERS
> @@ -0,0 +1,6 @@
> +STIH410-B2260 BOARD
> +M: Patrice Chotard <patrice.chotard at st.com>
> +S: Maintained
> +F: board/st/stih410-b2260/
> +F: include/configs/stih410-b2260.h
> +F: configs/stih410-b2260_defconfig
> diff --git a/board/st/stih410-b2260/Makefile b/board/st/stih410-b2260/Makefile
> new file mode 100644
> index 0000000..68a7903
> --- /dev/null
> +++ b/board/st/stih410-b2260/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2017
> +# Patrice Chotard, <patrice.chotard at st.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y = board.o
> diff --git a/board/st/stih410-b2260/board.c b/board/st/stih410-b2260/board.c
> new file mode 100644
> index 0000000..0c06bca
> --- /dev/null
> +++ b/board/st/stih410-b2260/board.c
> @@ -0,0 +1,28 @@
> +/*
> + * Board init file for STiH410-B2260
> + *
> + * (C) Copyright 2017 Patrice Chotard <patrice.chotard at st.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + gd->ram_size = PHYS_SDRAM_1_SIZE;
> + return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> +}
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
> new file mode 100644
> index 0000000..78103c6
> --- /dev/null
> +++ b/include/configs/stih410-b2260.h
> @@ -0,0 +1,56 @@
> +/*
> + * (C) Copyright 2017
> + * Patrice Chotard, <patrice.chotard at st.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/* ram memory-related information */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define PHYS_SDRAM_1 0x40000000
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +#define PHYS_SDRAM_1_SIZE 0x3FE00000
> +#define CONFIG_SYS_TEXT_BASE 0x7D600000
> +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +#define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */
> +
> +/* Libraries */
> +#define CONFIG_MD5
> +
> +#define CONFIG_BOOTARGS \
> + "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
> +
> +/* Environment */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "board= B2260" \
> + "load_addr= #CONFIG_SYS_LOAD_ADDR \0"
> +
> +#define CONFIG_ENV_IS_NOWHERE
> +#define CONFIG_ENV_SIZE 0x4000
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* Extra Commands */
> +#define CONFIG_CMD_ASKENV
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN 0x1800000
> +#define CONFIG_SYS_GBL_DATA_SIZE 1024 /* Global data structures */
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
> + CONFIG_SYS_MALLOC_LEN - \
> + CONFIG_SYS_GBL_DATA_SIZE)
> +
> +/* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
> +
> +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> +#define CONFIG_SYS_MAX_FLASH_BANKS 1
> +
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +
> +#endif /* __CONFIG_H */
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list