[U-Boot] [PATCH 2/7] board: Add STMicroelectronics STiH410-B2260 support

Patrice CHOTARD patrice.chotard at st.com
Thu Feb 2 10:26:25 UTC 2017


Hi Antonio

On 02/02/2017 10:02 AM, Antonio Borneo wrote:
> On Fri, Jan 20, 2017 at 5:05 PM,  <patrice.chotard at st.com> wrote:
>> From: Patrice Chotard <patrice.chotard at st.com>
>
> Hi Patrice,
>
> just some minor issue in the commit message
>
>> This board is a 96Board based on STMicrolectronics
>> STiH410 soc:
>
> s/STMicrolectronics/STMicroelectronics/
> s/soc/SoC/

i will fix it

>
> maybe rework the whole sentence as:
> This is a 96Board compliant board based on ...

Ok

>
>>   - 1GB DDR
>>   - On-Board USB combo WiFi/Bluetooth RTL8723BU
>>     with PCB soldered antenna
>>   - Ethernet 1000-BaseT
>>   - Sata
>
> s/Sata/SATA/

Ok

>
>>   - HDMI
>>   - 2 x USB2 type A
>
> USB2.0 ?

I will fix it

>
>>   - micro USB2 type AB
>
> maybe "1x USB2.0 type micro-AB" ?

Ok

>
>>   - SD card slot
>>   - High speed connector (SD/I2C/USB interfaces)
>>   - Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
>
> According to 96Board spec, it is named "low speed connector" or "low
> speed expansion connector".

I will fix it

>
> Antonio

Thanks for reviewing


>
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
>> ---
>>  board/st/stih410-b2260/Kconfig     | 19 +++++++++++++
>>  board/st/stih410-b2260/MAINTAINERS |  6 ++++
>>  board/st/stih410-b2260/Makefile    |  8 ++++++
>>  board/st/stih410-b2260/board.c     | 28 +++++++++++++++++++
>>  include/configs/stih410-b2260.h    | 56 ++++++++++++++++++++++++++++++++++++++
>>  5 files changed, 117 insertions(+)
>>  create mode 100644 board/st/stih410-b2260/Kconfig
>>  create mode 100644 board/st/stih410-b2260/MAINTAINERS
>>  create mode 100644 board/st/stih410-b2260/Makefile
>>  create mode 100644 board/st/stih410-b2260/board.c
>>  create mode 100644 include/configs/stih410-b2260.h
>>
>> diff --git a/board/st/stih410-b2260/Kconfig b/board/st/stih410-b2260/Kconfig
>> new file mode 100644
>> index 0000000..590add0
>> --- /dev/null
>> +++ b/board/st/stih410-b2260/Kconfig
>> @@ -0,0 +1,19 @@
>> +if TARGET_STIH410_B2260
>> +
>> +config SYS_BOARD
>> +       string
>> +       default "stih410-b2260"
>> +
>> +config SYS_VENDOR
>> +       string
>> +       default "st"
>> +
>> +config SYS_SOC
>> +       string
>> +       default "stih410"
>> +
>> +config SYS_CONFIG_NAME
>> +       string
>> +       default "stih410-b2260"
>> +
>> +endif
>> diff --git a/board/st/stih410-b2260/MAINTAINERS b/board/st/stih410-b2260/MAINTAINERS
>> new file mode 100644
>> index 0000000..e78c69a
>> --- /dev/null
>> +++ b/board/st/stih410-b2260/MAINTAINERS
>> @@ -0,0 +1,6 @@
>> +STIH410-B2260 BOARD
>> +M:     Patrice Chotard <patrice.chotard at st.com>
>> +S:     Maintained
>> +F:     board/st/stih410-b2260/
>> +F:     include/configs/stih410-b2260.h
>> +F:     configs/stih410-b2260_defconfig
>> diff --git a/board/st/stih410-b2260/Makefile b/board/st/stih410-b2260/Makefile
>> new file mode 100644
>> index 0000000..68a7903
>> --- /dev/null
>> +++ b/board/st/stih410-b2260/Makefile
>> @@ -0,0 +1,8 @@
>> +#
>> +# (C) Copyright 2017
>> +# Patrice Chotard, <patrice.chotard at st.com>
>> +#
>> +# SPDX-License-Identifier:     GPL-2.0+
>> +#
>> +
>> +obj-y  = board.o
>> diff --git a/board/st/stih410-b2260/board.c b/board/st/stih410-b2260/board.c
>> new file mode 100644
>> index 0000000..0c06bca
>> --- /dev/null
>> +++ b/board/st/stih410-b2260/board.c
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Board init file for STiH410-B2260
>> + *
>> + * (C) Copyright 2017 Patrice Chotard <patrice.chotard at st.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +int dram_init(void)
>> +{
>> +       gd->ram_size = PHYS_SDRAM_1_SIZE;
>> +       return 0;
>> +}
>> +
>> +void dram_init_banksize(void)
>> +{
>> +       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
>> +       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
>> +}
>> +
>> +int board_init(void)
>> +{
>> +       return 0;
>> +}
>> diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
>> new file mode 100644
>> index 0000000..78103c6
>> --- /dev/null
>> +++ b/include/configs/stih410-b2260.h
>> @@ -0,0 +1,56 @@
>> +/*
>> + * (C) Copyright 2017
>> + * Patrice Chotard, <patrice.chotard at st.com>
>> + *
>> + * SPDX-License-Identifier:    GPL-2.0+
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +/* ram memory-related information */
>> +#define CONFIG_NR_DRAM_BANKS           1
>> +#define PHYS_SDRAM_1                   0x40000000
>> +#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
>> +#define PHYS_SDRAM_1_SIZE              0x3FE00000
>> +#define CONFIG_SYS_TEXT_BASE           0x7D600000
>> +#define CONFIG_SYS_LOAD_ADDR           PHYS_SDRAM_1    /* default load addr */
>> +
>> +#define CONFIG_BAUDRATE                        115200
>> +
>> +#define CONFIG_SYS_HZ_CLOCK            1000000000      /* 1 GHz */
>> +
>> +/* Libraries */
>> +#define CONFIG_MD5
>> +
>> +#define CONFIG_BOOTARGS                                                        \
>> +       "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>> +
>> +/* Environment */
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> +       "board= B2260" \
>> +       "load_addr= #CONFIG_SYS_LOAD_ADDR \0"
>> +
>> +#define CONFIG_ENV_IS_NOWHERE
>> +#define CONFIG_ENV_SIZE 0x4000
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +/* Extra Commands */
>> +#define CONFIG_CMD_ASKENV
>> +
>> +/* Size of malloc() pool */
>> +#define CONFIG_SYS_MALLOC_LEN          0x1800000
>> +#define CONFIG_SYS_GBL_DATA_SIZE       1024    /* Global data structures */
>> +#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE - \
>> +                                        CONFIG_SYS_MALLOC_LEN - \
>> +                                        CONFIG_SYS_GBL_DATA_SIZE)
>> +
>> +/* Monitor Command Prompt */
>> +#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
>> +
>> +#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
>> +#define CONFIG_SYS_MAX_FLASH_BANKS     1
>> +
>> +#define CONFIG_SKIP_LOWLEVEL_INIT
>> +
>> +#endif /* __CONFIG_H */
>> --
>> 1.9.1
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot


More information about the U-Boot mailing list