[U-Boot] [PATCH v3 2/8] armv8: Add workaround for USB erratum A-009798

Suresh Gupta suresh.gupta at nxp.com
Fri Feb 3 14:09:32 UTC 2017


The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receiver
Compliance test failure for a 100mV threshold.

The changes shift the threshold from ~100mV towards ~130mV resulting
in passing of USB High Speed Receiver Sensitivity Compliance test

Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta at nxp.com>
---
Changes in v2: None
Changes in V3: Change CONFIG_XXX to CONFIG_ARCH_XXX

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig           |  6 ++++++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c             | 21 +++++++++++++++++++++
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h   |  1 +
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h   |  1 +
 4 files changed, 29 insertions(+)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index cceecf0..28a0015 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -23,6 +23,7 @@ config ARCH_LS1043A
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_HAS_DDR3
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
@@ -42,6 +43,7 @@ config ARCH_LS1046A
 	select SYS_FSL_ERRATUM_A010165
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
@@ -71,6 +73,7 @@ config ARCH_LS2080A
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010165
 	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 
@@ -155,6 +158,9 @@ config SYS_FSL_ERRATUM_A010539
 config SYS_FSL_ERRATUM_A009008
 	bool "Workaround for USB PHY erratum A009008"
 
+config SYS_FSL_ERRATUM_A009798
+	bool "Workaround for USB PHY erratum A009798"
+
 config MAX_CPUS
 	int "Maximum number of CPUs permitted for Layerscape"
 	default 4 if ARCH_LS1043A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 1f460d7..8d86985 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -75,6 +75,25 @@ static void erratum_a009008(void)
 #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
 }
 
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+	u32 val = scfg_in32(scfg + SCFG_USB3PRM1CR_USB1 / 4);
+	scfg_out32(scfg + SCFG_USB3PRM1CR_USB1 / 4 , val & USB_SQRXTUNE);
+	val = gur_in32(scfg + SCFG_USB3PRM1CR_USB2 / 4);
+	scfg_out32(scfg + SCFG_USB3PRM1CR_USB2 / 4 , val & USB_SQRXTUNE);
+	val = scfg_in32(scfg + SCFG_USB3PRM1CR_USB3 / 4);
+	scfg_out32(scfg + SCFG_USB3PRM1CR_USB3 / 4 , val & USB_SQRXTUNE);
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS2085A)
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+	u32 val = scfg_in32(scfg + SCFG_USB3PRM1CR / 4);
+	scfg_out32(scfg + SCFG_USB3PRM1CR / 4, val & USB_SQRXTUNE);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
 #if defined(CONFIG_FSL_LSCH3)
 /*
  * This erratum requires setting a value to eddrtqcr1 to
@@ -218,6 +237,7 @@ void fsl_lsch3_early_init_f(void)
 	erratum_a008514();
 	erratum_a008336();
 	erratum_a009008();
+	erratum_a009798();
 #ifdef CONFIG_CHAIN_OF_TRUST
 	/* In case of Secure Boot, the IBR configures the SMMU
 	* to allow only Secure transactions.
@@ -486,6 +506,7 @@ void fsl_lsch2_early_init_f(void)
 	erratum_a009660();
 	erratum_a010539();
 	erratum_a009008();
+	erratum_a009798();
 }
 #endif
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 62d7046..8bd40e8 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -342,6 +342,7 @@ struct ccsr_gur {
 #define SCFG_USB3PRM1CR_USB2		0x07C
 #define SCFG_USB3PRM1CR_USB3		0x088
 #define USB_TXVREFTUNE			0x9
+#define USB_SQRXTUNE			0xFC7FFFFF
 
 #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
 #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index c23c317..3537ecb 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -130,6 +130,7 @@
 #define SCFG_USB3PRM1CR			0x000
 #define SCFG_USB3PRM1CR_INIT		0x27672b2a
 #define USB_TXVREFTUNE			0x9
+#define USB_SQRXTUNE			0xFC7FFFFF
 #define SCFG_QSPICLKCTLR	0x10
 
 #define TP_ITYP_AV		0x00000001	/* Initiator available */
-- 
1.9.3



More information about the U-Boot mailing list