[U-Boot] [PATCH 03/10] stm32f7: serial: use clock driver to enable clock

Vikas Manocha vikas.manocha at st.com
Sat Feb 4 22:43:34 UTC 2017


Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
---
 drivers/serial/serial_stm32x7.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
index 2e6c676..969d94c 100644
--- a/drivers/serial/serial_stm32x7.c
+++ b/drivers/serial/serial_stm32x7.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <asm/io.h>
 #include <serial.h>
@@ -76,8 +77,23 @@ static int stm32_serial_probe(struct udevice *dev)
 {
 	struct stm32x7_serial_platdata *plat = dev->platdata;
 	struct stm32_usart *const usart = plat->base;
-	setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
 
+#if CONFIG_IS_ENABLED(CLK)
+	int ret;
+	struct clk clk;
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+#endif
+
+	setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
 	return 0;
 }
 
-- 
1.9.1



More information about the U-Boot mailing list