[U-Boot] [PATCH v3 4/6] mvebu: usb: xhci: Add VBUS regulator supply to the host driver

kostap at marvell.com kostap at marvell.com
Wed Feb 8 15:34:14 UTC 2017


From: Konstantin Porotchkin <kostap at marvell.com>

The USB device should linked to VBUS regulator through "vbus-supply"
DTS property.
This patch adds handling for "vbus-supply" property inside the USB
device entry for turning on the VBUS regulator upon the host adapter probe.

Change-Id: Ibcf72d82298be42353ca03fee064ae8077a7b9de
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
Cc: Stefan Roese <sr at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Nadav Haklai <nadavh at marvell.com>
Cc: Neta Zur Hershkovits <neta at marvell.com>
Cc: Igal Liberman <igall at marvell.com>
Cc: Haim Boot <hayim at marvell.com>
---
Changes for v3:
- Moved VBUS control from private GPIO to a fixed regulator
- Rebase on top of master branch


 doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 28 ++++++++++++++++++++
 drivers/usb/host/xhci-mvebu.c                     | 31 +++++++++++++++++++++++
 2 files changed, 59 insertions(+)
 create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt

diff --git a/doc/device-tree-bindings/usb/marvell.xhci-usb.txt b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
new file mode 100644
index 0000000..672a829
--- /dev/null
+++ b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
@@ -0,0 +1,28 @@
+Marvell SOC USB controllers
+
+This controller is integrated in Armada 3700/8K.
+It uses the same properties as a generic XHCI host controller
+
+Required properties :
+ - compatible: should be one or more of:
+   - "marvell,armada3700-xhci", "generic-xhci" for Armada 37xx SoCs
+   - "marvell,armada-8k-xhci", "generic-xhci" for Armada A8K SoCs
+ - reg: should contain address and length of the standard XHCI
+   register set for the device.
+ - interrupts: one XHCI interrupt should be described here.
+
+Optional properties:
+ - clocks: reference to a clock
+ - vbus-supply : If present, specifies the fixed regulator to be turned on
+   for providing power to the USB VBUS rail.
+
+Example:
+	cpm_usb3_0: usb3 at 500000 {
+		compatible = "marvell,armada-8k-xhci",
+			     "generic-xhci";
+		reg = <0x500000 0x4000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpm_syscon0 1 22>;
+		vbus-supply = <&reg_usb3h0_vbus>;
+		status = "disabled";
+	};
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
index 46eb937..149f6a4 100644
--- a/drivers/usb/host/xhci-mvebu.c
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -45,7 +45,38 @@ static int xhci_usb_probe(struct udevice *dev)
 	struct mvebu_xhci *ctx = dev_get_priv(dev);
 	struct xhci_hcor *hcor;
 	int len;
+#ifdef CONFIG_DM_REGULATOR_FIXED
+	const void *fdt = gd->fdt_blob;
+	int node = dev->of_offset;
+	const fdt32_t *regulator;
+	int size;
 
+	/*
+	 * The VBUS supply regulator is not probed automatically
+	 * Trigger the regulator probe upon USB port bring up
+	 */
+	regulator = fdt_getprop(fdt, node, "vbus-supply", &size);
+	if (regulator) {
+		uint32_t phandle;
+		struct udevice *config;
+		int reg_node, ret;
+
+		phandle = fdt32_to_cpu(*regulator);
+		reg_node = fdt_node_offset_by_phandle(fdt, phandle);
+		if (reg_node < 0) {
+			dev_err(dev, "vbus-supply has invalid phandle\n");
+			return -EINVAL;
+		}
+		ret = uclass_get_device_by_of_offset(UCLASS_REGULATOR,
+						     reg_node, &config);
+		if (ret) {
+			dev_err(dev, "failed to get VBUS regulator device\n");
+			return ret;
+		}
+	}
+#else
+	debug("VBUS regulator support is missing\n");
+#endif
 	ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
 	len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
 	hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
-- 
2.7.4



More information about the U-Boot mailing list