[U-Boot] [PATCH v3 4/6] mvebu: usb: xhci: Add VBUS regulator supply to the host driver
Marek Vasut
marex at denx.de
Wed Feb 8 15:35:19 UTC 2017
On 02/08/2017 04:34 PM, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
>
> The USB device should linked to VBUS regulator through "vbus-supply"
> DTS property.
> This patch adds handling for "vbus-supply" property inside the USB
> device entry for turning on the VBUS regulator upon the host adapter probe.
>
> Change-Id: Ibcf72d82298be42353ca03fee064ae8077a7b9de
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Neta Zur Hershkovits <neta at marvell.com>
> Cc: Igal Liberman <igall at marvell.com>
> Cc: Haim Boot <hayim at marvell.com>
> ---
> Changes for v3:
> - Moved VBUS control from private GPIO to a fixed regulator
> - Rebase on top of master branch
>
>
> doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 28 ++++++++++++++++++++
> drivers/usb/host/xhci-mvebu.c | 31 +++++++++++++++++++++++
> 2 files changed, 59 insertions(+)
> create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt
>
> diff --git a/doc/device-tree-bindings/usb/marvell.xhci-usb.txt b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
> new file mode 100644
> index 0000000..672a829
> --- /dev/null
> +++ b/doc/device-tree-bindings/usb/marvell.xhci-usb.txt
> @@ -0,0 +1,28 @@
> +Marvell SOC USB controllers
> +
> +This controller is integrated in Armada 3700/8K.
> +It uses the same properties as a generic XHCI host controller
> +
> +Required properties :
> + - compatible: should be one or more of:
> + - "marvell,armada3700-xhci", "generic-xhci" for Armada 37xx SoCs
> + - "marvell,armada-8k-xhci", "generic-xhci" for Armada A8K SoCs
> + - reg: should contain address and length of the standard XHCI
> + register set for the device.
> + - interrupts: one XHCI interrupt should be described here.
> +
> +Optional properties:
> + - clocks: reference to a clock
What clock ? Why are clock optional ?
This probably needs clock-names too.
> + - vbus-supply : If present, specifies the fixed regulator to be turned on
> + for providing power to the USB VBUS rail.
> +
> +Example:
> + cpm_usb3_0: usb3 at 500000 {
> + compatible = "marvell,armada-8k-xhci",
> + "generic-xhci";
> + reg = <0x500000 0x4000>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpm_syscon0 1 22>;
> + vbus-supply = <®_usb3h0_vbus>;
> + status = "disabled";
> + };
> diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
> index 46eb937..149f6a4 100644
> --- a/drivers/usb/host/xhci-mvebu.c
> +++ b/drivers/usb/host/xhci-mvebu.c
> @@ -45,7 +45,38 @@ static int xhci_usb_probe(struct udevice *dev)
> struct mvebu_xhci *ctx = dev_get_priv(dev);
> struct xhci_hcor *hcor;
> int len;
> +#ifdef CONFIG_DM_REGULATOR_FIXED
Just make the driver depend on REGULATOR_FIXED
> + const void *fdt = gd->fdt_blob;
> + int node = dev->of_offset;
> + const fdt32_t *regulator;
> + int size;
>
> + /*
> + * The VBUS supply regulator is not probed automatically
> + * Trigger the regulator probe upon USB port bring up
> + */
> + regulator = fdt_getprop(fdt, node, "vbus-supply", &size);
> + if (regulator) {
> + uint32_t phandle;
> + struct udevice *config;
> + int reg_node, ret;
> +
> + phandle = fdt32_to_cpu(*regulator);
> + reg_node = fdt_node_offset_by_phandle(fdt, phandle);
> + if (reg_node < 0) {
> + dev_err(dev, "vbus-supply has invalid phandle\n");
> + return -EINVAL;
> + }
> + ret = uclass_get_device_by_of_offset(UCLASS_REGULATOR,
> + reg_node, &config);
> + if (ret) {
> + dev_err(dev, "failed to get VBUS regulator device\n");
> + return ret;
Where is the regulator enabled ?
> + }
> + }
> +#else
> + debug("VBUS regulator support is missing\n");
> +#endif
> ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
> len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase));
> hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len);
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list