[U-Boot] [PATCH V2 09/20] mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP

Stefano Babic sbabic at denx.de
Sun Feb 12 09:22:11 UTC 2017



On 27/12/2016 11:04, Peng Fan wrote:
> Update the mxc_ocotp driver to support i.MX7ULP.
> The read/write sequence has some changes due to
> PDN and OUT_STATUS registers added and TIME register is
> removed. Also update the bank size and number.
> 
> Add is_mx7ulp macro in sys_proto.h
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> 
> V2:
>  Add imx_mx7ulp, and small update.
> 
>  arch/arm/include/asm/imx-common/sys_proto.h |  2 ++
>  drivers/misc/mxc_ocotp.c                    | 52 ++++++++++++++++++++++++++++-
>  2 files changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
> index 539d34b..732b692 100644
> --- a/arch/arm/include/asm/imx-common/sys_proto.h
> +++ b/arch/arm/include/asm/imx-common/sys_proto.h
> @@ -38,6 +38,8 @@
>  #define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL))
>  #define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
>  
> +#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))
> +
>  u32 get_nr_cpus(void);
>  u32 get_cpu_rev(void);
>  u32 get_cpu_speed_grade_hz(void);
> diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
> index 0b1c050..88610d6 100644
> --- a/drivers/misc/mxc_ocotp.c
> +++ b/drivers/misc/mxc_ocotp.c
> @@ -29,6 +29,12 @@
>  #ifdef CONFIG_MX7
>  #define BM_CTRL_ADDR                    0x0000000f
>  #define BM_CTRL_RELOAD                  0x00000400
> +#elif defined(CONFIG_MX7ULP)
> +#define BM_CTRL_ADDR                    0x000000FF
> +#define BM_CTRL_RELOAD                  0x00000400
> +#define BM_OUT_STATUS_DED				0x00000400
> +#define BM_OUT_STATUS_LOCKED			0x00000800
> +#define BM_OUT_STATUS_PROGFAIL			0x00001000
>  #else
>  #define BM_CTRL_ADDR			0x0000007f
>  #endif
> @@ -70,6 +76,9 @@
>  #elif defined CONFIG_MX7
>  #define FUSE_BANK_SIZE	0x40
>  #define FUSE_BANKS	16
> +#elif defined(CONFIG_MX7ULP)
> +#define FUSE_BANK_SIZE	0x80
> +#define FUSE_BANKS	31
>  #else
>  #error "Unsupported architecture\n"
>  #endif
> @@ -98,7 +107,7 @@ u32 fuse_bank_physical(int index)
>  {
>  	u32 phy_index;
>  
> -	if (is_mx6sl()) {
> +	if (is_mx6sl() || is_mx7ulp()) {
>  		phy_index = index;
>  	} else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
>  		if ((is_mx6ull() || is_mx6sll()) && index == 8)
> @@ -187,6 +196,10 @@ static int finish_access(struct ocotp_regs *regs, const char *caller)
>  	err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
>  	clear_error(regs);
>  
> +#ifdef CONFIG_MX7ULP
> +	/* Need to power down the OTP memory */
> +	writel(1, &regs->pdn);
> +#endif
>  	if (err) {
>  		printf("mxc_ocotp %s(): Access protect error\n", caller);
>  		return -EIO;
> @@ -217,6 +230,13 @@ int fuse_read(u32 bank, u32 word, u32 *val)
>  
>  	*val = readl(&regs->bank[phy_bank].fuse_regs[phy_word << 2]);
>  
> +#ifdef CONFIG_MX7ULP
> +	if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
> +		writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
> +		printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
> +		return -EIO;
> +	}
> +#endif
>  	return finish_access(regs, __func__);
>  }
>  
> @@ -238,6 +258,12 @@ static void set_timing(struct ocotp_regs *regs)
>  	clrsetbits_le32(&regs->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG,
>  			timing);
>  }
> +#elif defined(CONFIG_MX7ULP)
> +static void set_timing(struct ocotp_regs *regs)
> +{
> +	/* No timing set for MX7ULP */
> +}
> +
>  #else
>  static void set_timing(struct ocotp_regs *regs)
>  {
> @@ -302,6 +328,14 @@ int fuse_sense(u32 bank, u32 word, u32 *val)
>  	*val = readl(&regs->read_fuse_data);
>  #endif
>  
> +#ifdef CONFIG_MX7ULP
> +	if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
> +		writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
> +		printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
> +		return -EIO;
> +	}
> +#endif
> +
>  	return finish_access(regs, __func__);
>  }
>  
> @@ -355,6 +389,14 @@ int fuse_prog(u32 bank, u32 word, u32 val)
>  #endif
>  	udelay(WRITE_POSTAMBLE_US);
>  
> +#ifdef CONFIG_MX7ULP
> +	if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
> +		writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
> +		printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
> +		return -EIO;
> +	}
> +#endif
> +
>  	return finish_access(regs, __func__);
>  }
>  
> @@ -374,5 +416,13 @@ int fuse_override(u32 bank, u32 word, u32 val)
>  
>  	writel(val, &regs->bank[phy_bank].fuse_regs[phy_word << 2]);
>  
> +#ifdef CONFIG_MX7ULP
> +	if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
> +		writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
> +		printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
> +		return -EIO;
> +	}
> +#endif
> +
>  	return finish_access(regs, __func__);
>  }
> 

Reviewed-by : Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list