[U-Boot] [PATCH V2 11/20] wdog: Add the watchdog driver for MX7ULP.
Stefano Babic
sbabic at denx.de
Sun Feb 12 09:25:02 UTC 2017
On 27/12/2016 11:04, Peng Fan wrote:
> From: Ye Li <ye.li at nxp.com>
>
> This driver implements the HW WATCHDOG functions. Which needs
> to set CONFIG_HW_WATCHDOG to use them. This is disabled by default for
> mx7ulp.
>
> Use watchdog for reset cpu. Implement this in the driver.
> Need to define CONFIG_ULP_WATCHDOG to build it.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
>
> V2:
> Add License
>
> drivers/watchdog/Kconfig | 8 ++++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/ulp_wdog.c | 98 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 107 insertions(+)
> create mode 100644 drivers/watchdog/ulp_wdog.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index e69de29..dbdaafc 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -0,0 +1,8 @@
> +menu "WATCHDOG support"
> +
> +config ULP_WATCHDOG
> + bool "i.MX7ULP watchdog"
> + help
> + Say Y here to enable i.MX7ULP watchdog driver.
> +
> +endmenu
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index a007ae8..dea1836 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -15,3 +15,4 @@ obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
> obj-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o
> obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> +obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> diff --git a/drivers/watchdog/ulp_wdog.c b/drivers/watchdog/ulp_wdog.c
> new file mode 100644
> index 0000000..72ec694
> --- /dev/null
> +++ b/drivers/watchdog/ulp_wdog.c
> @@ -0,0 +1,98 @@
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +
> +/*
> + * MX7ULP WDOG Register Map
> + */
> +struct wdog_regs {
> + u8 cs1;
> + u8 cs2;
> + u16 reserve0;
> + u32 cnt;
> + u32 toval;
> + u32 win;
> +};
> +
> +#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
> +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 0x1500
> +#endif
> +
> +#define REFRESH_WORD0 0xA602 /* 1st refresh word */
> +#define REFRESH_WORD1 0xB480 /* 2nd refresh word */
> +
> +#define UNLOCK_WORD0 0xC520 /* 1st unlock word */
> +#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */
> +
> +#define WDGCS1_WDGE (1<<7)
> +#define WDGCS1_WDGUPDATE (1<<5)
> +
> +#define WDGCS2_FLG (1<<6)
> +
> +#define WDG_BUS_CLK (0x0)
> +#define WDG_LPO_CLK (0x1)
> +#define WDG_32KHZ_CLK (0x2)
> +#define WDG_EXT_CLK (0x3)
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void hw_watchdog_set_timeout(u16 val)
> +{
> + /* setting timeout value */
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
> +
> + writel(val, &wdog->toval);
> +}
> +
> +void hw_watchdog_reset(void)
> +{
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
> +
> + writel(REFRESH_WORD0, &wdog->cnt);
> + writel(REFRESH_WORD1, &wdog->cnt);
> +}
> +
> +void hw_watchdog_init(void)
> +{
> + u8 val;
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
> +
> + writel(UNLOCK_WORD0, &wdog->cnt);
> + writel(UNLOCK_WORD1, &wdog->cnt);
> +
> + val = readb(&wdog->cs2);
> + val |= WDGCS2_FLG;
> + writeb(val, &wdog->cs2);
> +
> + hw_watchdog_set_timeout(CONFIG_WATCHDOG_TIMEOUT_MSECS);
> + writel(0, &wdog->win);
> +
> + writeb(WDG_LPO_CLK, &wdog->cs2);/* setting 1-kHz clock source */
> + writeb((WDGCS1_WDGE | WDGCS1_WDGUPDATE), &wdog->cs1);/* enable counter running */
> +
> + hw_watchdog_reset();
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
> +
> + writel(UNLOCK_WORD0, &wdog->cnt);
> + writel(UNLOCK_WORD1, &wdog->cnt);
> +
> + hw_watchdog_set_timeout(5); /* 5ms timeout */
> + writel(0, &wdog->win);
> +
> + writeb(WDG_LPO_CLK, &wdog->cs2);/* setting 1-kHz clock source */
> + writeb(WDGCS1_WDGE, &wdog->cs1);/* enable counter running */
> +
> + hw_watchdog_reset();
> +
> + while (1);
> +}
>
This goes into drivers/watchdog, and it slightly differs from the
implementation in imx-watchdog.c. Code is quite simple, too, I think it
could be merged into the same file.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list