[U-Boot] [PATCH 8/8] arm: socfpga: sr1500 use environment in common header

Dalon Westergreen dwesterg at gmail.com
Sat Feb 18 20:51:48 UTC 2017


This removes the default environment from the sr1500 header
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

This board has no upstream devicetree in the kernel source,
so leave the default devicetree name socfpga.dtb.

Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>
---
 configs/socfpga_sr1500_defconfig |  1 +
 include/configs/socfpga_sr1500.h | 27 ---------------------------
 2 files changed, 1 insertion(+), 27 deletions(-)

diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig
index 981600b..b0925ab 100644
--- a/configs/socfpga_sr1500_defconfig
+++ b/configs/socfpga_sr1500_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_SR1500=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500"
+CONFIG_DEFAULT_FDT_FILE="socfpga.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index f67fafd..d94771c 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -17,8 +17,6 @@
 
 /* Booting Linux */
 #define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
@@ -28,31 +26,6 @@
 #define CONFIG_PHY_MARVELL
 #define PHY_ANEG_TIMEOUT	8000
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"verify=n\0" \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"bootimage=zImage\0" \
-	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-		"fsloadcmd=ext2load\0" \
-	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"qspiload=sf probe && mtdparts default && run ubiload\0" \
-	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
-		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
-		"ubifsload ${loadaddr} /boot/${bootimage} && " \
-		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
-
 /* Environment */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 
-- 
2.7.4



More information about the U-Boot mailing list