[U-Boot] [PATCH 8/8] arm: socfpga: sr1500 use environment in common header

Marek Vasut marex at denx.de
Sat Feb 18 20:56:30 UTC 2017


On 02/18/2017 09:51 PM, Dalon Westergreen wrote:
> This removes the default environment from the sr1500 header
> and instead uses the common environment provided in
> socfpga_common.h which now uses distro boot.
> 
> This board has no upstream devicetree in the kernel source,
> so leave the default devicetree name socfpga.dtb.
> 
> Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>
> ---
>  configs/socfpga_sr1500_defconfig |  1 +
>  include/configs/socfpga_sr1500.h | 27 ---------------------------
>  2 files changed, 1 insertion(+), 27 deletions(-)
> 
> diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig
> index 981600b..b0925ab 100644
> --- a/configs/socfpga_sr1500_defconfig
> +++ b/configs/socfpga_sr1500_defconfig
> @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
>  CONFIG_TARGET_SOCFPGA_SR1500=y
>  CONFIG_SPL_STACK_R_ADDR=0x00800000
>  CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500"
> +CONFIG_DEFAULT_FDT_FILE="socfpga.dtb"

Shouldn't this be socfpga_cyclone5_sr1500.dtb too ?

>  CONFIG_FIT=y
>  CONFIG_SYS_CONSOLE_IS_IN_ENV=y
>  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
> diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
> index f67fafd..d94771c 100644
> --- a/include/configs/socfpga_sr1500.h
> +++ b/include/configs/socfpga_sr1500.h
> @@ -17,8 +17,6 @@
>  
>  /* Booting Linux */
>  #define CONFIG_BOOTFILE		"uImage"
> -#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
> -#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
>  #define CONFIG_LOADADDR		0x01000000
>  #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
>  
> @@ -28,31 +26,6 @@
>  #define CONFIG_PHY_MARVELL
>  #define PHY_ANEG_TIMEOUT	8000
>  
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> -	"verify=n\0" \
> -	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> -	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
> -		"bootm ${loadaddr} - ${fdt_addr}\0" \
> -	"bootimage=zImage\0" \
> -	"fdt_addr=100\0" \
> -	"fdtimage=socfpga.dtb\0" \
> -		"fsloadcmd=ext2load\0" \
> -	"bootm ${loadaddr} - ${fdt_addr}\0" \
> -	"mmcroot=/dev/mmcblk0p2\0" \
> -	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> -		" root=${mmcroot} rw rootwait;" \
> -		"bootz ${loadaddr} - ${fdt_addr}\0" \
> -	"mmcload=mmc rescan;" \
> -		"load mmc 0:1 ${loadaddr} ${bootimage};" \
> -		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
> -	"qspiload=sf probe && mtdparts default && run ubiload\0" \
> -	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> -		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
> -		"bootz ${loadaddr} - ${fdt_addr}\0" \
> -	"ubiload=ubi part UBI && ubifsmount ubi0 && " \
> -		"ubifsload ${loadaddr} /boot/${bootimage} && " \
> -		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
> -
>  /* Environment */
>  #define CONFIG_ENV_IS_IN_SPI_FLASH
>  
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list