[U-Boot] [PATCH v3 2/7] arm: usb: dra7xx: xHCI registers based on USB port index

[Igor Grinberg]

On 02/19/17 17:52, Marek Vasut wrote:
> On 02/19/2017 04:15 PM, Tom Rini wrote:
>> On Sun, Feb 19, 2017 at 04:13:02PM +0100, Marek Vasut wrote:
>>> On 02/19/2017 03:55 PM, Uri Mashiach wrote:
>>>>
>>>>
>>>> On 02/19/2017 04:27 PM, Marek Vasut wrote:
>>>>> On 02/19/2017 02:27 PM, Uri Mashiach wrote:
>>>>>> Modify the determination of the base address of xHCI registers of DRA7XX
>>>>>> targets.
>>>>>> Before the commit: by the target.
>>>>>> After the commit: by the USB port index.
>>>>>>
>>>>>> Cc: Lokesh Vutla <lokeshvutla at ti.com>
>>>>>> Cc: Marek Vasut <marex at denx.de>
>>>>>> Signed-off-by: Uri Mashiach <uri.mashiach at compulab.co.il>
>>>>>> ---
>>>>>> V1 -> V2: Replace the commit "fix XHCI registers base address".
>>>>>> V2 -> V3: Replace the commit "reintroduce the CONFIG_AM57XX symbol"
>>>>>>
>>>>>>  configs/dra7xx_evm_defconfig    |  1 +
>>>>>>  configs/dra7xx_hs_evm_defconfig |  1 +
>>>>>>  drivers/usb/host/Kconfig        | 16 ++++++++++++++++
>>>>>>  include/linux/usb/xhci-omap.h   |  6 ++++--
>>>>>>  4 files changed, 22 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
>>>>>> index 26b26cc..1f47f92 100644
>>>>
>>>> [...]
>>>>
>>>>>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>>>>>> index 5129a57..440fbcf 100644
>>>>>> --- a/drivers/usb/host/Kconfig
>>>>>> +++ b/drivers/usb/host/Kconfig
>>>>>> @@ -43,6 +43,22 @@ config USB_XHCI_ZYNQMP
>>>>>>      help
>>>>>>        Enables support for the on-chip xHCI controller on Xilinx
>>>>>> ZynqMP SoCs.
>>>>>>
>>>>>> +choice
>>>>>> +    prompt "DRA7XX xHCI USB index select"
>>>>>> +    depends on DRA7XX
>>>>>> +
>>>>>> +config USB_XHCI_DRA7XX_INDEX0
>>>>>> +    bool "USB0"
>>>>>> +    help
>>>>>> +      DRA7XX xHCI USB0.
>>>>>> +
>>>>>> +config USB_XHCI_DRA7XX_INDEX1
>>>>>> +    bool "USB1"
>>>>>> +    help
>>>>>> +      DRA7XX xHCI USB1.
>>>>>
>>>>> What is this all about ? Shouldn't this come from DT ? And what if I
>>>>> want to use both XHCI ? This looks totally bogus ...
>>>>>
>>>>
>>>> The support for both XHCI is currently missing.
>>>> This could be a temporary solution until the DT solution.
>>>> The current situation is worse - selecting USB0 or USB1 based on the
>>>> target.
>>>
>>> So we're replacing it with equally bad solution ? Hmmm , no.
>>> The MW will open mid-march, there's about a month to fix this,
>>> so please do.
>>
>> Do note that the relevant driver here is not yet using DM_USB.
>>
> We had multi-controller support before DM existed, no problem.
> But then, xhci does support DM, so fixing this should also not
> be a problem.

Right! We're talking on fixing the XHCI driver...
We can't afford it right now...

-- 
Regards,
Igor.