[U-Boot] [PATCH v2 1/3] ARM: dts: sun9i: Add mmc1 pinmux setting

[Rask Ingemann Lambertsen]

From: Chen-Yu Tsai <wens at csie.org>

commit 56b0730157f70dc23d6caff9e7ceb8b377b96b9f upstream.

On the A80, mmc1 is available on pingroup G. Designs mostly use this
to connect to an SDIO WiFi chip.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Rask Ingemann Lambertsen <rask at formelder.dk>
---
Changes from v1 to v2:
- Corrected mail sender and added my Signed-off-by: to commit message.

 arch/arm/dts/sun9i-a80.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
index f68b324..92412b2 100644
--- a/arch/arm/dts/sun9i-a80.dtsi
+++ b/arch/arm/dts/sun9i-a80.dtsi
@@ -701,6 +701,14 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins: mmc1 {
+				allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
-- 
2.10.2