[U-Boot] [PATCH v2 1/3] ARM: dts: sun9i: Add mmc1 pinmux setting

[Jagan Teki]

On Sat, Feb 25, 2017 at 5:54 PM, Rask Ingemann Lambertsen
<rask at formelder.dk> wrote:
> From: Chen-Yu Tsai <wens at csie.org>
>
> commit 56b0730157f70dc23d6caff9e7ceb8b377b96b9f upstream.
>
> On the A80, mmc1 is available on pingroup G. Designs mostly use this
> to connect to an SDIO WiFi chip.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> Signed-off-by: Rask Ingemann Lambertsen <rask at formelder.dk>
> ---
> Changes from v1 to v2:
> - Corrected mail sender and added my Signed-off-by: to commit message.
>
>  arch/arm/dts/sun9i-a80.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
> index f68b324..92412b2 100644
> --- a/arch/arm/dts/sun9i-a80.dtsi
> +++ b/arch/arm/dts/sun9i-a80.dtsi
> @@ -701,6 +701,14 @@
>                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>                         };
>
> +                       mmc1_pins: mmc1 {
> +                               allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
> +                                                "PG4", "PG5";
> +                               allwinner,function = "mmc1";
> +                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> +                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +                       };
> +
>                         mmc2_8bit_pins: mmc2_8bit {
>                                 allwinner,pins = "PC6", "PC7", "PC8", "PC9",
>                                                  "PC10", "PC11", "PC12",

Reviewed-by: Jagan Teki <jagan at openedev.com>

Applied to u-boot-sunxi/master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.