[U-Boot] [PATCH v2] mmc: sdhci-cadence: add Cadence SD4HC support

Jaehoon Chung jh80.chung at samsung.com
Tue Jan 3 02:09:46 CET 2017


On 12/30/2016 10:41 PM, Masahiro Yamada wrote:
> Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>

Applied on u-boot-mmc. Thanks!

Best Regards,
Jaehoon Chung

> ---
> 
> Changes in v2:
>   - Remove unneeded version setting
>   - Add SoC specific compatible "socionext,uniphier-sd4hc"
>   - Add "depends on BLK && DM_MMC_OPS && MMC_SDHCI"
> 
>  drivers/mmc/Kconfig         |  12 +++++
>  drivers/mmc/Makefile        |   1 +
>  drivers/mmc/sdhci-cadence.c | 125 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 138 insertions(+)
>  create mode 100644 drivers/mmc/sdhci-cadence.c
> 
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 2ba1254..ff4344f 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -159,6 +159,18 @@ config MMC_SDHCI_BCM2835
>  
>  	  If unsure, say N.
>  
> +config MMC_SDHCI_CADENCE
> +	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
> +	depends on BLK && DM_MMC_OPS
> +	depends on MMC_SDHCI
> +	depends on OF_CONTROL
> +	help
> +	  This selects the Cadence SD/SDIO/eMMC driver.
> +
> +	  If you have a controller with this interface, say Y here.
> +
> +	  If unsure, say N.
> +
>  config MMC_SDHCI_KONA
>  	bool "SDHCI support on Broadcom KONA platform"
>  	depends on MMC_SDHCI
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 2b136ea..a543188 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_MSM_SDHCI) += msm_sdhci.o
>  # SDHCI
>  obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
> +obj-$(CONFIG_MMC_SDHCI_CADENCE)		+= sdhci-cadence.o
>  obj-$(CONFIG_MMC_SDHCI_KONA)		+= kona_sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_MV)		+= mv_sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_S5P)		+= s5p_sdhci.o
> diff --git a/drivers/mmc/sdhci-cadence.c b/drivers/mmc/sdhci-cadence.c
> new file mode 100644
> index 0000000..2253bbc
> --- /dev/null
> +++ b/drivers/mmc/sdhci-cadence.c
> @@ -0,0 +1,125 @@
> +/*
> + * Copyright (C) 2016 Socionext Inc.
> + *   Author: Masahiro Yamada <yamada.masahiro at socionext.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <linux/io.h>
> +#include <linux/sizes.h>
> +#include <dm/device.h>
> +#include <mmc.h>
> +#include <sdhci.h>
> +
> +/* HRS - Host Register Set (specific to Cadence) */
> +#define SDHCI_CDNS_HRS04		0x10		/* PHY access port */
> +#define   SDHCI_CDNS_HRS04_ACK			BIT(26)
> +#define   SDHCI_CDNS_HRS04_RD			BIT(25)
> +#define   SDHCI_CDNS_HRS04_WR			BIT(24)
> +#define   SDHCI_CDNS_HRS04_RDATA_SHIFT		12
> +#define   SDHCI_CDNS_HRS04_WDATA_SHIFT		8
> +#define   SDHCI_CDNS_HRS04_ADDR_SHIFT		0
> +
> +/* SRS - Slot Register Set (SDHCI-compatible) */
> +#define SDHCI_CDNS_SRS_BASE		0x200
> +
> +/* PHY */
> +#define SDHCI_CDNS_PHY_DLY_SD_HS	0x00
> +#define SDHCI_CDNS_PHY_DLY_SD_DEFAULT	0x01
> +#define SDHCI_CDNS_PHY_DLY_UHS_SDR12	0x02
> +#define SDHCI_CDNS_PHY_DLY_UHS_SDR25	0x03
> +#define SDHCI_CDNS_PHY_DLY_UHS_SDR50	0x04
> +#define SDHCI_CDNS_PHY_DLY_UHS_DDR50	0x05
> +#define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY	0x06
> +#define SDHCI_CDNS_PHY_DLY_EMMC_SDR	0x07
> +#define SDHCI_CDNS_PHY_DLY_EMMC_DDR	0x08
> +
> +struct sdhci_cdns_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +	void __iomem *hrs_addr;
> +};
> +
> +static void sdhci_cdns_write_phy_reg(struct sdhci_cdns_plat *plat,
> +				     u8 addr, u8 data)
> +{
> +	void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS04;
> +	u32 tmp;
> +
> +	tmp = (data << SDHCI_CDNS_HRS04_WDATA_SHIFT) |
> +	      (addr << SDHCI_CDNS_HRS04_ADDR_SHIFT);
> +	writel(tmp, reg);
> +
> +	tmp |= SDHCI_CDNS_HRS04_WR;
> +	writel(tmp, reg);
> +
> +	tmp &= ~SDHCI_CDNS_HRS04_WR;
> +	writel(tmp, reg);
> +}
> +
> +static void sdhci_cdns_phy_init(struct sdhci_cdns_plat *plat)
> +{
> +	sdhci_cdns_write_phy_reg(plat, SDHCI_CDNS_PHY_DLY_SD_HS, 4);
> +	sdhci_cdns_write_phy_reg(plat, SDHCI_CDNS_PHY_DLY_SD_DEFAULT, 4);
> +	sdhci_cdns_write_phy_reg(plat, SDHCI_CDNS_PHY_DLY_EMMC_LEGACY, 9);
> +	sdhci_cdns_write_phy_reg(plat, SDHCI_CDNS_PHY_DLY_EMMC_SDR, 2);
> +	sdhci_cdns_write_phy_reg(plat, SDHCI_CDNS_PHY_DLY_EMMC_DDR, 3);
> +}
> +
> +static int sdhci_cdns_bind(struct udevice *dev)
> +{
> +	struct sdhci_cdns_plat *plat = dev_get_platdata(dev);
> +
> +	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static int sdhci_cdns_probe(struct udevice *dev)
> +{
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct sdhci_cdns_plat *plat = dev_get_platdata(dev);
> +	struct sdhci_host *host = dev_get_priv(dev);
> +	fdt_addr_t base;
> +	int ret;
> +
> +	base = dev_get_addr(dev);
> +	if (base == FDT_ADDR_T_NONE)
> +		return -EINVAL;
> +
> +	plat->hrs_addr = devm_ioremap(dev, base, SZ_1K);
> +	if (!plat->hrs_addr)
> +		return -ENOMEM;
> +
> +	host->name = dev->name;
> +	host->ioaddr = plat->hrs_addr + SDHCI_CDNS_SRS_BASE;
> +	host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD;
> +
> +	sdhci_cdns_phy_init(plat);
> +
> +	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
> +	if (ret)
> +		return ret;
> +
> +	upriv->mmc = &plat->mmc;
> +	host->mmc = &plat->mmc;
> +	host->mmc->priv = host;
> +
> +	return sdhci_probe(dev);
> +}
> +
> +static const struct udevice_id sdhci_cdns_match[] = {
> +	{ .compatible = "socionext,uniphier-sd4hc" },
> +	{ .compatible = "cdns,sd4hc" },
> +	{ /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(sdhci_cdns) = {
> +	.name = "sdhci-cdns",
> +	.id = UCLASS_MMC,
> +	.of_match = sdhci_cdns_match,
> +	.bind = sdhci_cdns_bind,
> +	.probe = sdhci_cdns_probe,
> +	.priv_auto_alloc_size = sizeof(struct sdhci_host),
> +	.platdata_auto_alloc_size = sizeof(struct sdhci_cdns_plat),
> +	.ops = &sdhci_ops,
> +};
> 



More information about the U-Boot mailing list