[U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: OrangePi Zero fixes

[Icenowy Zheng]

2017年1月14日 10:06于 Andre Przywara <andre.przywara at arm.com>写道：
>
> Hi, 
>
> two small patches on top of sunxi/next to enable Ethernet and SPI flash. 
> Was there any reason the emac node was omitted from the DT patch (as 
> it is in the OrangePi One DT, which I belive the Zero has copied from)? 

Because the DT is directly the kernel's DT.

>
> Also newer versions of the board seem all to come with SPI flash soldered, 
> so lets enable the SPL support for that to allow booting without an SD card. 
> Having the option enabled for boards without a chip doesn't harm, as it 
> will only be used if the board is actually booted from SPI. 
> This was quickly tested with ssvb's version of sunxi-fel, which can 
> write the SPI flash via FEL (USB). 
>
> Cheers, 
> Andre. 
>
> Andre Przywara (2): 
>   sunxi: dts: OrangePi Zero: add Ethernet node 
>   sunxi: OrangePi Zero: defconfig: enable SPI flash 
>
> arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 11 +++++++++++ 
> configs/orangepi_zero_defconfig              |  2 ++ 
> 2 files changed, 13 insertions(+) 
>
> -- 
> 2.8.2 
>
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group. 
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com. 
> For more options, visit https://groups.google.com/d/optout.