[U-Boot] [PATCH 2/2] sunxi: OrangePi Zero: defconfig: enable SPI flash

[Jagan Teki]

On Sunday 15 January 2017 05:04 PM, Maxime Ripard wrote:
> On Sat, Jan 14, 2017 at 02:06:10AM +0000, Andre Przywara wrote:
>> Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
>> which the board can actually boot from.
>> Enable the SPL support for the SPI controller and SPI flash to allow
>> putting the SPL, the DT and U-Boot proper into there. This will let
>> a board boot without an SD card inserted.
>> The flash chip can be written with a version of the sunxi-fel tool.
>>
>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Reviewed-by: Jagan Teki <jagan at openedev.com>

Applied to u-boot-sunxi/master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.