[U-Boot] [RFC Patch V2] drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36XX

[Jaehoon Chung]

Hi Adam,

On 01/12/2017 06:07 AM, Adam Ford wrote:
> On the OMAP36xx (and 37xx) the CONTROL_WKUP_CTRL register has
> a field (bit 6) named GPIO_IO_PWRDNZ.  If 0, the IO buffers which
> are related to the MMC are disabled. After the PBIAS is configured,
> this bit should be set high to enable the MMC port.
> 
> V2:  Make this feature a config option and add it to the MMC section
>      of the Kconfig.  This allows the precompiler to only include it
>      in a small handfull of OMAP36XX and 37XX boards using MMC1.
> 
> V1:  Original submission
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>

Sorry for late, Could you resend the patch on latest?
Current patch has conflict..

Best Regards,
Jaehoon Chung

> 
> diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
> index ac1a6a3..bd5f1a8 100644
> --- a/configs/omap3_logic_defconfig
> +++ b/configs/omap3_logic_defconfig
> @@ -15,6 +15,7 @@ CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_MMC=y
> +CONFIG_MMC_OMAP36XX_PINS=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  # CONFIG_CMD_FPGA is not set
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index c3462ab..d6fcf7f 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -204,6 +204,17 @@ config MMC_SDHCI_SPEAR
>  
>  	  If unsure, say N.
>  
> +config MMC_OMAP36XX_PINS
> +	bool "Enable MMC1 on OMAP36XX/37XX"
> +	depends on OMAP34XX
> +	help
> +	  This enables extended-drain in the MMC/SD/SDIO1I/O and 
> +	  GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
> +	  specific to the OMAP36XX/37XX using MMC1
> +
> +	  If you have a controller with this interface, say Y here.
> +
> +	  If unsure, say N.
>  endif
>  
>  endmenu
> diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
> index 0a1ee40..a4720e1 100644
> --- a/drivers/mmc/omap_hsmmc.c
> +++ b/drivers/mmc/omap_hsmmc.c
> @@ -38,6 +38,7 @@
>  #include <asm/arch/sys_proto.h>
>  #endif
>  #include <dm.h>
> +#include <asm/arch-omap3/mux.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -115,6 +116,13 @@ static unsigned char mmc_board_init(struct mmc *mmc)
>  		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
>  		&t2_base->pbias_lite);
>  
> +#ifdef CONFIG_MMC_OMAP36XX_PINS
> +	if (get_cpu_family() == CPU_OMAP36XX)
> +		writel(readl(OMAP34XX_CTRL_WKUP_CTRL) |
> +				OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
> +				OMAP34XX_CTRL_WKUP_CTRL);
> +#endif
> +
>  	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
>  		&t2_base->devconf0);
>  
>