[U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address
Roger Quadros
rogerq at ti.com
Mon Jan 30 16:15:14 CET 2017
In stead of defining the board EEPROM address in the board headers
let's define them in the board config files and make them
configurable by Kconfig.
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
arch/arm/Kconfig | 10 ++++++++++
configs/am57xx_evm_defconfig | 2 ++
configs/am57xx_evm_nodt_defconfig | 2 ++
configs/am57xx_hs_evm_defconfig | 2 ++
configs/dra7xx_evm_defconfig | 2 ++
configs/dra7xx_hs_evm_defconfig | 2 ++
include/configs/am57xx_evm.h | 4 ----
include/configs/dra7xx_evm.h | 4 ----
8 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c04adfb..19886ad 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1009,6 +1009,16 @@ config TARGET_THUNDERX_88XX
endchoice
+config EEPROM_BUS_ADDRESS
+ int "Board EEPROM's I2C bus address"
+ range 0 8
+ default 0
+
+config EEPROM_CHIP_ADDRESS
+ hex "Board EEPROM's I2C chip address"
+ range 0 0xff
+ default 0x50
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm283x/Kconfig"
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 656d991..3b3e74a 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
CONFIG_OMAP54XX=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ARMV7_LPAE=y
diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig
index b3b95f9..8d722e7 100644
--- a/configs/am57xx_evm_nodt_defconfig
+++ b/configs/am57xx_evm_nodt_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
CONFIG_OMAP54XX=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index d920d68..36c8004 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -3,6 +3,8 @@ CONFIG_OMAP54XX=y
CONFIG_TI_SECURE_DEVICE=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 1836021..3108c58 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -2,6 +2,8 @@ CONFIG_ARM=y
CONFIG_OMAP54XX=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ARMV7_LPAE=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 1d107e4..7f5ce49 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TI_SECURE_DEVICE=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_EEPROM_BUS_ADDRESS=0
+CONFIG_EEPROM_CHIP_ADDRESS=0x50
CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 840502c..d9e1119 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -105,10 +105,6 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-/* EEPROM */
-#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
-#define CONFIG_EEPROM_BUS_ADDRESS 0
-
/*
* Default to using SPI for environment, etc.
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index da458a4..46beb8b 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -264,8 +264,4 @@
#endif
#endif /* NOR support */
-/* EEPROM */
-#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
-#define CONFIG_EEPROM_BUS_ADDRESS 0
-
#endif /* __CONFIG_DRA7XX_EVM_H */
--
2.7.4
More information about the U-Boot
mailing list