[U-Boot] [u-boot PATCH v2 6/8] ARM: Use Kconfig for board EEPROM's I2C bus and chip address
Lokesh Vutla
lokeshvutla at ti.com
Tue Jan 31 05:17:19 CET 2017
On Monday 30 January 2017 08:45 PM, Roger Quadros wrote:
> In stead of defining the board EEPROM address in the board headers
> let's define them in the board config files and make them
> configurable by Kconfig.
>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
> arch/arm/Kconfig | 10 ++++++++++
> configs/am57xx_evm_defconfig | 2 ++
> configs/am57xx_evm_nodt_defconfig | 2 ++
> configs/am57xx_hs_evm_defconfig | 2 ++
> configs/dra7xx_evm_defconfig | 2 ++
> configs/dra7xx_hs_evm_defconfig | 2 ++
> include/configs/am57xx_evm.h | 4 ----
> include/configs/dra7xx_evm.h | 4 ----
> 8 files changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c04adfb..19886ad 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1009,6 +1009,16 @@ config TARGET_THUNDERX_88XX
>
> endchoice
>
> +config EEPROM_BUS_ADDRESS
> + int "Board EEPROM's I2C bus address"
> + range 0 8
> + default 0
> +
> +config EEPROM_CHIP_ADDRESS
> + hex "Board EEPROM's I2C chip address"
> + range 0 0xff
> + default 0x50
> +
IMO, these should be placed in board/ti/common/Kconfig. Also need not
specify the value explicitly in defconfig if default value is used.
Thanks and regards,
Lokesh
> source "arch/arm/mach-at91/Kconfig"
>
> source "arch/arm/mach-bcm283x/Kconfig"
> diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
> index 656d991..3b3e74a 100644
> --- a/configs/am57xx_evm_defconfig
> +++ b/configs/am57xx_evm_defconfig
> @@ -2,6 +2,8 @@ CONFIG_ARM=y
> CONFIG_OMAP54XX=y
> # CONFIG_SPL_NAND_SUPPORT is not set
> CONFIG_TARGET_AM57XX_EVM=y
> +CONFIG_EEPROM_BUS_ADDRESS=0
> +CONFIG_EEPROM_CHIP_ADDRESS=0x50
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_ARMV7_LPAE=y
> diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig
> index b3b95f9..8d722e7 100644
> --- a/configs/am57xx_evm_nodt_defconfig
> +++ b/configs/am57xx_evm_nodt_defconfig
> @@ -2,6 +2,8 @@ CONFIG_ARM=y
> CONFIG_OMAP54XX=y
> # CONFIG_SPL_NAND_SUPPORT is not set
> CONFIG_TARGET_AM57XX_EVM=y
> +CONFIG_EEPROM_BUS_ADDRESS=0
> +CONFIG_EEPROM_CHIP_ADDRESS=0x50
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_SYS_CONSOLE_INFO_QUIET=y
> diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
> index d920d68..36c8004 100644
> --- a/configs/am57xx_hs_evm_defconfig
> +++ b/configs/am57xx_hs_evm_defconfig
> @@ -3,6 +3,8 @@ CONFIG_OMAP54XX=y
> CONFIG_TI_SECURE_DEVICE=y
> # CONFIG_SPL_NAND_SUPPORT is not set
> CONFIG_TARGET_AM57XX_EVM=y
> +CONFIG_EEPROM_BUS_ADDRESS=0
> +CONFIG_EEPROM_CHIP_ADDRESS=0x50
> CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
> CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
> CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
> diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
> index 1836021..3108c58 100644
> --- a/configs/dra7xx_evm_defconfig
> +++ b/configs/dra7xx_evm_defconfig
> @@ -2,6 +2,8 @@ CONFIG_ARM=y
> CONFIG_OMAP54XX=y
> # CONFIG_SPL_NAND_SUPPORT is not set
> CONFIG_TARGET_DRA7XX_EVM=y
> +CONFIG_EEPROM_BUS_ADDRESS=0
> +CONFIG_EEPROM_CHIP_ADDRESS=0x50
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_ARMV7_LPAE=y
> diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
> index 1d107e4..7f5ce49 100644
> --- a/configs/dra7xx_hs_evm_defconfig
> +++ b/configs/dra7xx_hs_evm_defconfig
> @@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_TI_SECURE_DEVICE=y
> # CONFIG_SPL_NAND_SUPPORT is not set
> CONFIG_TARGET_DRA7XX_EVM=y
> +CONFIG_EEPROM_BUS_ADDRESS=0
> +CONFIG_EEPROM_CHIP_ADDRESS=0x50
> CONFIG_TI_SECURE_EMIF_REGION_START=0xbe000000
> CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
> CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
> diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
> index 840502c..d9e1119 100644
> --- a/include/configs/am57xx_evm.h
> +++ b/include/configs/am57xx_evm.h
> @@ -105,10 +105,6 @@
> #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> CONFIG_SYS_SCSI_MAX_LUN)
>
> -/* EEPROM */
> -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
> -#define CONFIG_EEPROM_BUS_ADDRESS 0
> -
> /*
> * Default to using SPI for environment, etc.
> * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
> diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
> index da458a4..46beb8b 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -264,8 +264,4 @@
> #endif
> #endif /* NOR support */
>
> -/* EEPROM */
> -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
> -#define CONFIG_EEPROM_BUS_ADDRESS 0
> -
> #endif /* __CONFIG_DRA7XX_EVM_H */
>
More information about the U-Boot
mailing list