[U-Boot] [PATCH v2 0/1] mx7sabresd: Set VLD04 output to 2.8V in PMIC initialization.

[Gautam Bhat]

This change sets the VLDO4 settings output to 2.8V in PMIC
initialization. I accidentally noticed this when I was testing
the DSI voltage input which was 3.3V. Not setting the proper voltage
can harm some of the voltage sensitive peripheral.

Changes in v2:
- Removed extra parentheses for 0xF.
- Modified subject and commit messages as per the recommendation.

Gautam Bhat (1):
  Set VLD04 output to 2.8V in PMIC initialization.

 board/freescale/mx7dsabresd/mx7dsabresd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.11.0