July 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Jul 1 03:13:01 UTC 2017
Ending: Mon Jul 31 20:17:40 UTC 2017
Messages: 3736

• [U-Boot] [PATCH 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Alex
• [U-Boot] [PATCH 3/5] configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1   Alex
• [U-Boot] [PATCH 2/5] libfdt_env.h: Add <malloc.h> in libfdt environment   Pantelis Antoniou
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Pantelis Antoniou
• [U-Boot] [PATCH 5/5] fit: Introduce methods for applying overlays on fit-load   Pantelis Antoniou
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Pantelis Antoniou
• [U-Boot] [PATCH 1/5] libfdt.h: Introduce FDT_PATH_MAX   Pantelis Antoniou
• [U-Boot] [PATCH 4/5] test: overlay: Add unit test for stacked overlay   Pantelis Antoniou
• [U-Boot] USB power is not enabled fro BeagleBone Black   Stephen Arnold
• [U-Boot] [PATCH v3 1/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.   Stefano Babic
• [U-Boot] [PATCH] mx6cuboxi: Add support for sata   Stefano Babic
• [U-Boot] [PATCH next 3/3] mx6sabreauto: Update to SPL only mode   Stefano Babic
• [U-Boot] [PATCH V4 1/4] mmc: fsl_esdhc: correct type of wp_enable   Stefano Babic
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Stefano Babic
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6sabreauto: Do not enable WEIM by default   Stefano Babic
• [U-Boot] [PATCH] warp: Use PARTUUID to specify the rootfs location   Stefano Babic
• [U-Boot] [PATCH] mx6sabreauto: Add Falcon mode support   Stefano Babic
• [U-Boot] [PATCH 1/2] imx: cx9020: use fdt_addr_r and ramdisk_addr_r   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: cx9020: try pxe boot, if no vmlinuz on mmc   Stefano Babic
• [U-Boot] Warning due to commit 6a516ef15d79   Stefano Babic
• [U-Boot] Cubox-i broken   Stefano Babic
• [U-Boot] Warning due to commit 6a516ef15d79   Stefano Babic
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Stefano Babic
• [U-Boot] [PATCH BUGFIX] net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH   Stefano Babic
• [U-Boot] Cubox-i broken   Stefano Babic
• [U-Boot] Cubox-i broken   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] imx6: Add support for Phytec pfla02 (NAND)   Stefano Babic
• [U-Boot] [PATCH] imx6: Add support for Phytec pfla02 (NAND)   Stefano Babic
• [U-Boot] [PATCH v2] mx6: Add support for Phytec pfla02 (NAND)   Stefano Babic
• [U-Boot] [PATCH] arm: imx: Enable booting from SATA on wandboard.   Stefano Babic
• [U-Boot] [PATCH v2 BUGFIX] net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH   Stefano Babic
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Felipe Balbi
• [U-Boot] [PATCH v4 3/7] arch/arm/dts: Add Turris Omnia device tree   Marek Behún
• [U-Boot] [PATCH 1/5] ubi: Kconfig: Fix MTD_UBI selection dependency   Karl Beldan
• [U-Boot] [PATCH 2/5] cmd: Kconfig: Fix a dependency of CMD_MTDPARTS   Karl Beldan
• [U-Boot] [PATCH 3/5] ubi: Kconfig: Make MTD_UBI select MTD_PARTITIONS   Karl Beldan
• [U-Boot] [PATCH 4/5] cmd: Kconfig: Make CMD_UBI select CMD_MTDPARTS   Karl Beldan
• [U-Boot] [PATCH 5/5] cmd: Kconfig: Fix CMD_UBIFS dependencies   Karl Beldan
• [U-Boot] [PATCH v2 0/1] mx7sabresd: Set VLD04 output to 2.8V in PMIC initialization.   Gautam Bhat
• [U-Boot] [PATCH v2 1/1] mx7sabresd: Set VLD04 output to 2.8V in PMIC initialization.   Gautam Bhat
• [U-Boot] [PATCH v3 0/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.   Gautam Bhat
• [U-Boot] [PATCH v3 1/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.   Gautam Bhat
• [U-Boot] [PATCH 1/1] Set VLD04 output to 2.8V in PMIC initialization.   Gautam Bhat
• [U-Boot] [RFC] efi_loader: memory leak in bootefi   Ard Biesheuvel
• [U-Boot] mkimage   Bittner, Jeff
• [U-Boot] mkimage Question   Bittner, Jeff
• [U-Boot] [PATCH] net: phy: micrel: add an option to disable gigabit for the KSZ9031   Sebastien Bourdelin
• [U-Boot] [PATCH] km/common: remove unused function declarations   Holger Brunck
• [U-Boot] [PATCH 1/2] km/ivm: always set ethaddr after reading IVM   Holger Brunck
• [U-Boot] [PATCH 2/2] km/ivm: allow to set locally administred MAC addresses   Holger Brunck
• [U-Boot] [PATCH] efi_loader: fix bug in efi_get_memory_map   Brüns, Stefan
• [U-Boot] Pull request: u-boot-mips   Paul Burton
• [U-Boot] Pull request: u-boot-mips   Paul Burton
• [U-Boot] [PATCH] mips-relocs: Fix warning from gcc 6.3   Paul Burton
• [U-Boot] [PATCH] mips-relocs: Fix warning from gcc 6.3   Paul Burton
• [U-Boot] Pull request: u-boot-mips   Paul Burton
• [U-Boot] [PATCH v3 2/2] MIPS: Stop building position independent code   Paul Burton
• [U-Boot] [PATCH] sunxi: reduce Orange Pi Zero DRAM clock speed   Clément Bœsch
• [U-Boot] [PATCH v8 08/10] usb: host: ohci-generic: add CLOCK support   Patrice CHOTARD
• [U-Boot] [RESEND][PATCH v5 1/5] usb: host: xhci-dwc3: Convert driver to DM   Patrice CHOTARD
• [U-Boot] [RESEND][PATCH v5 1/5] usb: host: xhci-dwc3: Convert driver to DM   Patrice CHOTARD
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   Patrice CHOTARD
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   Patrice CHOTARD
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   Patrice CHOTARD
• [U-Boot] [PATCH 2/6] ram: stm32: get base address from DT   Patrice CHOTARD
• [U-Boot] [PATCH 6/6] ram: stm32: add stm32h7 support   Patrice CHOTARD
• [U-Boot] [PATCH 1/1] mmc: Add MMC support for stm32h7 Socs   Patrice CHOTARD
• [U-Boot] [PATCH v2 1/1] mmc: Add MMC support for stm32h7 Socs   Patrice CHOTARD
• [U-Boot] [PATCH v2 1/1] mmc: Add MMC support for stm32h7 Socs   Patrice CHOTARD
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Patrice CHOTARD
• [U-Boot] [PATCH 1/1] usb: host: xhci-dwc3: add missing #ifdef CONFIG_PHY   Patrice CHOTARD
• [U-Boot] [PATCH 1/1] dm: phy: add missing #ifdef CONFIG_PHY   Patrice CHOTARD
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Patrice CHOTARD
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Patrice CHOTARD
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Patrice CHOTARD
• [U-Boot] [PATCH v3 1/1] mmc: Add MMC support for stm32h7 Socs   Patrice CHOTARD
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Patrice CHOTARD
• [U-Boot] [PATCH v8 0/6] Extend xhci-dwc3   Patrice CHOTARD
• [U-Boot] [PATCH v11 00/10] usb: Extend ehci and ohci generic driver   Patrice CHOTARD
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Patrice CHOTARD
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Patrice CHOTARD
• [U-Boot] STM32F746 Discovery - No serial output?   Patrice CHOTARD
• [U-Boot] STM32F746 Discovery - No serial output?   Patrice CHOTARD
• [U-Boot] [PATCH 1/1] stmf32f4: soc: fix buildman compilation error   Patrice CHOTARD
• [U-Boot] [PATCH] Convert CONFIG_USB_ETHER et al to Kconfig   Gregory CLEMENT
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   J. William Campbell
• [U-Boot] [RESEND PATCH] Inherit default value for bootdelay from distro_bootcmd on odroid-xu3.   Vagrant Cascadian
• [U-Boot] [RESEND PATCH 0/4] Switch odroid to use distro_bootcmd.   Vagrant Cascadian
• [U-Boot] [PATCH] arm: imx: Enable booting from SATA on wandboard.   Vagrant Cascadian
• [U-Boot] [PATCH v6 3/3] GPT: provide commands to selectively rename partitions   Alison Chaiken
• [U-Boot] [PATCH v11 0/6] Add Intel Arria 10 SoC FPGA driver   Chee, Tien Fong
• [U-Boot] [PATCH v11 3/6] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH v11 5/6] drivers: Enable FPGA driver build on SPL   Chee, Tien Fong
• [U-Boot] [PATCH v11 6/6] arm: socfpga: Add FPGA driver support for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v11 0/6] Add Intel Arria 10 SoC FPGA driver   Chee, Tien Fong
• [U-Boot] [PATCH v11 3/6] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   Chee, Tien Fong
• [U-Boot] [PATCH v11 6/6] arm: socfpga: Add FPGA driver support for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   Chee, Tien Fong
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   Chee, Tien Fong
• [U-Boot] [PATCH v13 0/8] Add Intel Arria 10 SoC FPGA driver   Chee, Tien Fong
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Chee, Tien Fong
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable FPGA bridge in gen5 U-boot   Chee, Tien Fong
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Chee, Tien Fong
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Chee, Tien Fong
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] [rfc] parse the second area of android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Bin Chen
• [U-Boot] [RFC] move booti_setup to arch/arm/lig/image.c   Bin Chen
• [U-Boot] [PATCH v3 2/3] rockchip: firefly: Add "usb start" to auto-start USB device   Jacob Chen
• [U-Boot] [PATCH 16/41] Convert CONFIG_CMD_REGINFO to Kconfig   LEROY Christophe
• [U-Boot] [PATCH] mmc: pic32_sdhci: Complete the transition to driver model   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: pic32_sdhci: Complete the transition to driver model   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: pic32_sdhci: Complete the transition to driver model   Jaehoon Chung
• [U-Boot] [PATCH] drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro   Jaehoon Chung
• [U-Boot] [PATCH] drivers: mmc: Avoid memory leak in case of failure   Jaehoon Chung
• [U-Boot] [PATCH v2 1/1] mmc: Add MMC support for stm32h7 Socs   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH v2 1/1] mmc: Add MMC support for stm32h7 Socs   Jaehoon Chung
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Jaehoon Chung
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Jaehoon Chung
• [U-Boot] [PATCH v2 00/15] dm: sata: mmc: Convert a sunxi board to driver model for MMC, SATA   Jaehoon Chung
• [U-Boot] [U-Boot, 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Jaehoon Chung
• [U-Boot] [U-Boot, 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Jaehoon Chung
• [U-Boot] [U-Boot, 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Jaehoon Chung
• [U-Boot] [U-Boot, 1/2] regulator: palmas: Add support for LDO1 regulator to provide 1.8V   Jaehoon Chung
• [U-Boot] [U-Boot, 2/2] regulator: palmas: disable bypass when the LDO is enabled   Jaehoon Chung
• [U-Boot] [U-Boot, v2, 1/3] dm: core: Add functions to get strings and the string count from a stringlist   Jaehoon Chung
• [U-Boot] [U-Boot, v2, 2/3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Jaehoon Chung
• [U-Boot] [U-Boot, v2, 3/3] dm: syscon: scan sub-nodes of the syscon node   Jaehoon Chung
• [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes   Jaehoon Chung
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] usb: kbd: don't fail with iomux   Rob Clark
• [U-Boot] [PATCH] video: add config option to skip framebuffer clear   Rob Clark
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Rob Clark
• [U-Boot] [RFC] efi: variable support   Rob Clark
• [U-Boot] [PATCH 0/5] db410c: updates for grub + gfxterm   Rob Clark
• [U-Boot] [PATCH] dm: core: don't fail to iterate if first one fails to probe   Rob Clark
• [U-Boot] [PATCH 0/5] db410c: updates for grub + gfxterm   Rob Clark
• [U-Boot] [PATCH] efi_loader: workaround for grub lsefi bug   Rob Clark
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Rob Clark
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Rob Clark
• [U-Boot] [PATCH 0/4] efi_loader: fix disk objects + device-paths   Rob Clark
• [U-Boot] [PATCH 1/4] efi: add some more device path structures   Rob Clark
• [U-Boot] [PATCH 2/4] efi_loader: add udevice to EFI device-path mapping   Rob Clark
• [U-Boot] [PATCH 3/4] efi_loader: make disk objects for partitions   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: use efi_devpath to get correct boot device-path   Rob Clark
• [U-Boot] [PATCH] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Rob Clark
• [U-Boot] [PATCH 0/3] video patches   Rob Clark
• [U-Boot] [PATCH 1/3] dm: core: also parse chosen node   Rob Clark
• [U-Boot] [PATCH 2/3] video: simplefb   Rob Clark
• [U-Boot] [PATCH 3/3] video: add config option to skip framebuffer clear   Rob Clark
• [U-Boot] [PATCH 0/5] dragonboard 410c patches   Rob Clark
• [U-Boot] [PATCH 1/5] Makefile: also build fdt for snapdragon   Rob Clark
• [U-Boot] [PATCH 2/5] db410c: use fdt passed from lk   Rob Clark
• [U-Boot] [PATCH 3/5] db410c: add reserved-memory node to dts   Rob Clark
• [U-Boot] [PATCH 4/5] db410c: on aarch64 the fdtfile is in per-vendor subdirectory   Rob Clark
• [U-Boot] [PATCH 5/5] db410c: config updates   Rob Clark
• [U-Boot] [PATCH 1/2] usb: kbd: don't fail with iomux   Rob Clark
• [U-Boot] [PATCH 2/2] usb: kbd: add missing \n   Rob Clark
• [U-Boot] [PATCH] db410c: enable r8152 usb eth   Rob Clark
• [U-Boot] [PATCH 1/5] Makefile: also build fdt for snapdragon   Rob Clark
• [U-Boot] [PATCH 5/5] db410c: config updates   Rob Clark
• [U-Boot] [U-Boot, 3/4] efi_loader: make disk objects for partitions   Rob Clark
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Rob Clark
• [U-Boot] [PATCH] efi_loader: EFI file paths should be DOS style   Rob Clark
• [U-Boot] [PATCH] efi_loader: log EFI return values too   Rob Clark
• [U-Boot] [PATCH] efi_loader: move guidcmp to header   Rob Clark
• [U-Boot] [PATCH] efi_loader: log EFI return values too   Rob Clark
• [U-Boot] [PATCH] efi_loader: log EFI return values too   Rob Clark
• [U-Boot] [PATCH] efi_loader: add back optional efi_handler::open()   Rob Clark
• [U-Boot] [PATCH 1/2] efi_loader: add helper macro to construct protocol objects   Rob Clark
• [U-Boot] [PATCH 2/2] efi_loader: expose protocols via GUID   Rob Clark
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Rob Clark
• [U-Boot] efi_loader: workaround for grub lsefi bug   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: add back optional efi_handler::open()   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [RFC] efi: variable support   Rob Clark
• [U-Boot] [PATCH 2/4] efi_loader: add udevice to EFI device-path mapping   Rob Clark
• [U-Boot] [RFC] efi: variable support   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: add back optional efi_handler::open()   Rob Clark
• [U-Boot] [RFC] efi: variable support   Rob Clark
• [U-Boot] [RFC] efi: variable support   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Rob Clark
• [U-Boot] [PATCH] efi_loader: remove double EFI_EXIT() with efi_unsupported   Rob Clark
• [U-Boot] [PATCH] efi_loader: remove more double EFI_EXIT() in efi_disk.c   Rob Clark
• [U-Boot] [PATCH 1/3] efi_loader: Add an EFI_CALL() macro   Rob Clark
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Rob Clark
• [U-Boot] [PATCH 3/3] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Rob Clark
• [U-Boot] [PATCH] efi_loader: fix bug in efi_get_memory_map   Rob Clark
• [U-Boot] [PATCH] efi_loader: only evaluate EFI_EXIT()'s ret once   Rob Clark
• [U-Boot] [PATCH] efi_loader: fix bug in efi_get_memory_map   Rob Clark
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Rob Clark
• [U-Boot] [PATCH 1/4] efi_loader: only evaluate EFI_EXIT()'s ret once   Rob Clark
• [U-Boot] [PATCH 2/4] efi_loader: Add an EFI_CALL() macro   Rob Clark
• [U-Boot] [PATCH 3/4] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH] efi_loader: add some missing breaks   Rob Clark
• [U-Boot] [RFC 00/10] efi_loader: bunch of EFI work for distro boot   Rob Clark
• [U-Boot] [RFC 01/10] efi_loader: add back optional efi_handler::open()   Rob Clark
• [U-Boot] [RFC 02/10] efi: fill in disk signature bits of hard drive device path.   Rob Clark
• [U-Boot] [RFC 03/10] efi: add some more device path structures   Rob Clark
• [U-Boot] [RFC 04/10] fs: add fs_readdir()   Rob Clark
• [U-Boot] [RFC 05/10] efi_loader: add device-path utils   Rob Clark
• [U-Boot] [RFC 06/10] efi_loader: use proper device-paths for partitions   Rob Clark
• [U-Boot] [RFC 07/10] efi_loader: use proper device-paths for net   Rob Clark
• [U-Boot] [RFC 08/10] efi_loader: refactor boot device and loaded_image handling   Rob Clark
• [U-Boot] [RFC 09/10] efi_loader: add file/filesys support   Rob Clark
• [U-Boot] [RFC 10/10] efi_loader: support load_image() from a file-path   Rob Clark
• [U-Boot] [RFC 10/10] efi_loader: support load_image() from a file-path   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Rob Clark
• [U-Boot] [PATCH] env: add ENV_IS_ANYWHERE   Rob Clark
• [U-Boot] [PATCH] vsprintf.c: add wide string (%ls) support   Rob Clark
• [U-Boot] UBOOT For R-Car/Boards/H3SK (Over Xen Hypervisor )   CruiserAbhi
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Patrick DELAUNAY
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Patrick DELAUNAY
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Patrick DELAUNAY
• [U-Boot] [PATCH 5/6] board: ti: am43xx: Add TEE loading and firewall setup   Andrew F. Davis
• [U-Boot] [PATCH v2 0/6] AM43xx OP-TEE support   Andrew F. Davis
• [U-Boot] [PATCH v2 1/6] arm: mach-omap2: Move omap5/sec-fxns.c into sec-common.c   Andrew F. Davis
• [U-Boot] [PATCH v2 2/6] arm: mach-omap2: Factor out common FDT fixup suport   Andrew F. Davis
• [U-Boot] [PATCH v2 3/6] arm: mach-omap2: fdt-common: Add OP-TEE node when firmware node is defined   Andrew F. Davis
• [U-Boot] [PATCH v2 4/6] arm: mach-omap2: am33xx: Add FDT fixup suport for AM33xx/AM43xx boards   Andrew F. Davis
• [U-Boot] [PATCH v2 5/6] board: ti: am43xx: Add TEE loading and firewall setup   Andrew F. Davis
• [U-Boot] [PATCH v2 6/6] board: ti: am43xx: Add FDT fixup for HS devices   Andrew F. Davis
• [U-Boot] [PATCH v2 0/6] AM43xx OP-TEE support   Andrew F. Davis
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Andrew F. Davis
• [U-Boot] [PATCH 0/4] Add default secure boot env for K2x   Andrew F. Davis
• [U-Boot] [PATCH 1/4] configs: k2x_evm: Adds FIT loading environment variables   Andrew F. Davis
• [U-Boot] [PATCH 2/4] configs: k2x_evm: Adds environment variables for secure devices   Andrew F. Davis
• [U-Boot] [PATCH 3/4] configs: k2x_evm: Reorder default boot command   Andrew F. Davis
• [U-Boot] [PATCH 4/4] arm: mach-keystone: Updates mon_install for K2G HS   Andrew F. Davis
• [U-Boot] [PATCH] configs: ti: armv7: Fixes bug in fit_loadaddr for ramfs boot   Andrew F. Davis
• [U-Boot] [PATCH] arm: mach-keystone: Fixes issue with return values in inline assembly   Andrew F. Davis
• [U-Boot] [PATCH] configs: ti: armv7: Fixes bug in fit_loadaddr for ramfs boot   Andrew F. Davis
• [U-Boot] [PATCH] arm: mach-omap2: Align image address before cache operations   Andrew F. Davis
• [U-Boot] [PATCH 1/3] image: Add TI PMMC image type   Andrew F. Davis
• [U-Boot] [PATCH 2/3] ARM: k2g: Add FIT image handler for PMMC firmware   Andrew F. Davis
• [U-Boot] [PATCH 3/3] configs: k2g_evm: Remove PMMC loading environment commands   Andrew F. Davis
• [U-Boot] [PATCH 0/4] dfu: remove limitation on partition size   Patrick Delaunay
• [U-Boot] [PATCH 1/4] dfu: allow dfu read on partition greater than 2GB   Patrick Delaunay
• [U-Boot] [PATCH 2/4] dfu: remove limitation on partition size   Patrick Delaunay
• [U-Boot] [PATCH 3/4] dfu: factorize transaction cleanup   Patrick Delaunay
• [U-Boot] [PATCH 4/4] dfu: add common function to initiate transaction   Patrick Delaunay
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Patrick Delaunay
• [U-Boot] [PATCH 0/2] powerpc: remove 4xx support   Ricardo Ribalda Delgado
• [U-Boot] [PATCH] net: Fix compile failure in net.c   Holger Dengler
• [U-Boot] [PATCH 2/7] powerpc, 8xx: Implement GLL2 ERRATA   Wolfgang Denk
• [U-Boot] [PATCH] video: add config option to skip framebuffer clear   Wolfgang Denk
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Wolfgang Denk
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Wolfgang Denk
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Wolfgang Denk
• [U-Boot] [PATCH v2b 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Wolfgang Denk
• [U-Boot] [PATCH v3] powerpc, 8xx: Add support for MCR3000 board from CSSI   Wolfgang Denk
• [U-Boot] [PATCH 28/30] env: Drop saveenv() in favour of env_save()   Wolfgang Denk
• [U-Boot] [PATCH] km/common: remove unused function declarations   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2017.07 is released   Wolfgang Denk
• [U-Boot] [PATCH 01/14] powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()   Wolfgang Denk
• [U-Boot] [PATCH 02/14] powerpc: get rid of addr_probe()   Wolfgang Denk
• [U-Boot] [PATCH 04/14] power, timer: reset TBL before TBU   Wolfgang Denk
• [U-Boot] [PATCH 05/14] powerpc: move set_msr() and get_msr() into .h   Wolfgang Denk
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Wolfgang Denk
• [U-Boot] [PATCH 07/14] Convert CONFIG_CMD_REGINFO to Kconfig   Wolfgang Denk
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Wolfgang Denk
• [U-Boot] mkimage Question   Wolfgang Denk
• [U-Boot] Booting Wandboard through USB   Wolfgang Denk
• [U-Boot] [PATCHv4 0/2] ARM: sunxi: Add support for OLinuXino Lime2 eMMC   Diego
• [U-Boot] [PATCH] rockchip: rk3229: add dwc2 node for fastboot   Meng Dongyang
• [U-Boot] [PATCH] rockchip: dts: rk3229: add dwc2 node for fastboot   Meng Dongyang
• [U-Boot] [PATCH] mx6sabreauto: Add Falcon mode support   Diego Dorta
• [U-Boot] [PATCH] mx6sabreauto: Make Ethernet functional again   Diego Dorta
• [U-Boot] [PATCH] mx6sabreauto: Make Ethernet functional again   Diego Dorta
• [U-Boot] [PATCH] mx6sabreauto: Make Ethernet functional again   Diego Dorta
• [U-Boot] STM32F746 Discovery - No serial output?   Francois Dugast
• [U-Boot] [PATCH] m68k: mcf5445x: move early ddr init as board-specific   Angelo Dureghello
• [U-Boot] [PATCH] m68k: mcf5445x: allow CS0 to be undefined   Angelo Dureghello
• [U-Boot] [PATCH] m68k: fix cache.c for Coldfire V4E   Angelo Dureghello
• [U-Boot] [PATCH] m68k: add board stmark2, mcf5441x based   Angelo Dureghello
• [U-Boot] [RFC 1/1] m68k: mfc5227x: do not rely on uninitialized stack values   Angelo Dureghello
• [U-Boot] [PATCH v2] rockchip: rk3288: Add reset reason detection   Wadim Egorov
• [U-Boot] [PATCH 1/2] rockchip: phycore: Add ID page of M24C32-D EEPROM   Wadim Egorov
• [U-Boot] [PATCH 2/2] rockchip: phycore: Read configuration EEPROM & set ethaddr in late init   Wadim Egorov
• [U-Boot] [PATCH v2 1/1] mx7sabresd: Set VLD04 output to 2.8V in PMIC initialization.   Fabio Estevam
• [U-Boot] [PATCH] mx6cuboxi: Add support for sata   Fabio Estevam
• [U-Boot] [PATCH v3 1/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.   Fabio Estevam
• [U-Boot] [PATCH 1/1] Set VLD04 output to 2.8V in PMIC initialization.   Fabio Estevam
• [U-Boot] [PATCH] mx6sabreauto: Add Falcon mode support   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6sabreauto: Do not enable WEIM by default   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabre: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Fabio Estevam
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Fabio Estevam
• [U-Boot] [PATCH 2/4] wandboard: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH 3/4] mx6cuboxi: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH 4/4] embestmx6boards: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Fabio Estevam
• [U-Boot] [PATCH] warp: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Fabio Estevam
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Fabio Estevam
• [U-Boot] [PATCH] mx6sabreauto: Make Ethernet functional again   Fabio Estevam
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Fabio Estevam
• [U-Boot] [PATCH] mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig   Fabio Estevam
• [U-Boot] Cubox-i broken   Fabio Estevam
• [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR   Fabio Estevam
• [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR   Fabio Estevam
• [U-Boot] [PATCH] Use packed structures for networking   Fabio Estevam
• [U-Boot] [PATCH] imx6: Add support for Phytec pfla02 (NAND)   Fabio Estevam
• [U-Boot] Convert CMD_NAND to KConfig (help)   Fabio Estevam
• [U-Boot] [PATCH] arm: imx: Enable booting from SATA on wandboard.   Fabio Estevam
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Peng Fan
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Peng Fan
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Peng Fan
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Peng Fan
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Peng Fan
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Peng Fan
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Peng Fan
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Peng Fan
• [U-Boot] [PATCH V4 1/4] mmc: fsl_esdhc: correct type of wp_enable   Peng Fan
• [U-Boot] [RFC/PATCH 1/2] ni: zynq: Add support for NI Ettus Research Project Sulfur Rev2 SDR   Moritz Fischer
• [U-Boot] [PATCH 4/5] test: overlay: Add unit test for stacked overlay   Moritz Fischer
• [U-Boot] i.MX6Q USB OTG Gadget and Fastboot?   Adam Ford
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Adam Ford
• [U-Boot] [U-Boot,1/3] arm: omap: Detect boot mode very early   Adam Ford
• [U-Boot] [U-Boot,1/3] arm: omap: Detect boot mode very early   Adam Ford
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Adam Ford
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Adam Ford
• [U-Boot] [PATCH] omap3: omap3_logic: Disable Falcon mode   Adam Ford
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Adam Ford
• [U-Boot] [PATCH] omap3: omap3_logic: Disable Falcon mode   Adam Ford
• [U-Boot] 2017.05-RC3 hanging on DM3730   Adam Ford
• [U-Boot] armv5 and OMAP3 Question   Adam Ford
• [U-Boot] Kconfig conversion Question   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_SYS_I2C_OMAP24XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] Remove unused CONFIG_TWL4030_PWM   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_USB_ETHER et al to Kconfig   Adam Ford
• [U-Boot] Convert CMD_NAND to KConfig (help)   Adam Ford
• [U-Boot] Kconfig conversion Question   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_SYS_I2C_OMAP24XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 0/2] Convert CONFIG_OMAP3_SPI to Kconfig   Adam Ford
• [U-Boot] [PATCH 1/2] OMAP3_SPI: Kconfig: move OMAP3_SPI out of DM_SPI section.   Adam Ford
• [U-Boot] [PATCH 2/2] Convert CONFIG_OMAP3_SPI to Kconfig   Adam Ford
• [U-Boot] [RFC PATCH] Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig   Adam Ford
• [U-Boot] [RFC PATCH] OMAP2PLUS boards' CONFIG_SYS_LOAD_ADDR to Kconfig   Adam Ford
• [U-Boot] [RFC PATCH] Convert CONFIG_SYS_LOAD_ADDR to Kconfig   Adam Ford
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Adam Ford
• [U-Boot] [RFC PATCH] Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig   Adam Ford
• [U-Boot] [PATCH v2] Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig   Adam Ford
• [U-Boot] [PATCH] configs: Migrate CMD_NAND*   Adam Ford
• [U-Boot] [PATCH v3 60/66] spl: moveconfig: migrate CONFIG_SPL_LDSCRIPT   Adam Ford
• [U-Boot] Atmel mci patch 4.2->4.41   Erik Frederiksen
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Andreas Färber
• [U-Boot] [PATCH 1/5] net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021   Alexandru Gagniuc
• [U-Boot] [PATCH 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Alexandru Gagniuc
• [U-Boot] [PATCH 3/5] configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1   Alexandru Gagniuc
• [U-Boot] [PATCH 4/5] net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxx   Alexandru Gagniuc
• [U-Boot] [PATCH 5/5] net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options   Alexandru Gagniuc
• [U-Boot] [PATCH v2 0/4] Add support for Meson GXBB GPIOs to U-Boot   Beniamino Galvani
• [U-Boot] [PATCH v2 1/4] arm: dts: meson: import dts files from Linux 4.12   Beniamino Galvani
• [U-Boot] [PATCH v2 2/4] pinctrl: meson: add GPIO support   Beniamino Galvani
• [U-Boot] [PATCH v2 3/4] odroid-c2: enable GPIO   Beniamino Galvani
• [U-Boot] [PATCH v2 4/4] pinctrl: meson: convert to livetree   Beniamino Galvani
• [U-Boot] [U-Boot,v2,4/4] pinctrl: meson: convert to livetree   Beniamino Galvani
• [U-Boot] Nios II 10m50 is not working   Gan, Yau Wai
• [U-Boot] Nios II 10m50 is not working   Gan, Yau Wai
• [U-Boot] Question about uclass_add function   Gan, Yau Wai
• [U-Boot] [PATCH] nios2: 10m50: Add CPU pre-relocation in device tree   Gan, Yau Wai
• [U-Boot] Nios II 10m50 is not working   Gan, Yau Wai
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Suneel Garapati
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Suneel Garapati
• [U-Boot] [PATCH] stm32: Correct positioning of declaration   Simon Glass
• [U-Boot] [PATCH 00/14] dm: sata: mmc: Convert a sunxi board to driver model for MMC, SATA   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: disk: iterate only over valid block devices   Simon Glass
• [U-Boot] [PATCH v2 00/15] dm: sata: mmc: Convert a sunxi board to driver model for MMC, SATA   Simon Glass
• [U-Boot] [PATCH v2 01/15] ahci: Support non-PCI controllers   Simon Glass
• [U-Boot] [PATCH v2 02/15] dm: mmc: Allow disabling driver model in SPL   Simon Glass
• [U-Boot] [PATCH v2 03/15] fdt: Correct fdt_get_base_address()   Simon Glass
• [U-Boot] [PATCH v2 04/15] dm: scsi: Drop duplicate SCSI and DM_SCSI options   Simon Glass
• [U-Boot] [PATCH v2 05/15] dm: ahci: Correct uclass private data   Simon Glass
• [U-Boot] [PATCH v2 06/15] dm: mmc: sunxi: Rename struct sunxi_mmc_host to sunxi_mmc_priv   Simon Glass
• [U-Boot] [PATCH v2 07/15] dm: mmc: sunxi: Rename mmchost to priv   Simon Glass
• [U-Boot] [PATCH v2 08/15] dm: mmc: sunxi: Pass private data around explicitly   Simon Glass
• [U-Boot] [PATCH v2 09/15] dm: mmc: sunxi: Drop mmc_clk_io_on()   Simon Glass
• [U-Boot] [PATCH v2 10/15] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v2 11/15] dm: sunxi: Linksprite_pcDuino3: Correct polarity of MMC card detect   Simon Glass
• [U-Boot] [PATCH v2 12/15] dm: scsi: Don't scan the SCSI bus when probing   Simon Glass
• [U-Boot] [PATCH v2 13/15] dm: sunxi: sata: Don't build sata support into SPL   Simon Glass
• [U-Boot] [PATCH v2 14/15] dm: sata: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v2 15/15] dm: sunxi: Move Linksprite_pcDuino3 to use DM for MMC, SATA   Simon Glass
• [U-Boot] [PATCH v6] mmc: gen_atmel_mci: add driver model support for mci   Simon Glass
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Simon Glass
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Simon Glass
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH 14/14] dm: sunxi: Move Linksprite_pcDuino3 to use DM for MMC, SATA   Simon Glass
• [U-Boot] [PATCH 00/14] dm: sata: mmc: Convert a sunxi board to driver model for MMC, SATA   Simon Glass
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Simon Glass
• [U-Boot] [PATCH 01/39] dm: blk: Add a function to find an interface-type name   Simon Glass
• [U-Boot] [PATCH 02/39] dm: blk: Add a generic function for block device commands   Simon Glass
• [U-Boot] [PATCH 03/39] dm: sata: Adjust the 'sata' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH 04/39] dm: scsi: Adjust the 'scsi' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH 05/39] dm: ide: Adjust the 'ide' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH 06/39] dm: usb: Adjust the 'usb' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH 07/39] dm: blk: Update return value in blk_create_devicef()   Simon Glass
• [U-Boot] [PATCH 08/39] dm: core: Add a comment about the device_remove() flags   Simon Glass
• [U-Boot] [PATCH 09/39] dm: sata: dwc_ahsata: Make functions static   Simon Glass
• [U-Boot] [PATCH 10/39] dm: sata: dw_sata: Drop dwc_ahsata_rw_ncq_cmd()   Simon Glass
• [U-Boot] [PATCH 11/39] dm: sata: dw_sata: Move exported functions to the end   Simon Glass
• [U-Boot] [PATCH 12/39] dm: sata: dw_sata: Rename 'probe_ent' to uc_priv   Simon Glass
• [U-Boot] [PATCH 13/39] dm: sata: dw_sata: Drop unnecessary casts   Simon Glass
• [U-Boot] [PATCH 14/39] dm: sata: dw_sata: Pass uc_priv to internal functions   Simon Glass
• [U-Boot] [PATCH 15/39] dm: sata: dw_sata: Drop unnecessary brackets   Simon Glass
• [U-Boot] [PATCH 16/39] dm: sata: dw_sata: Sort #include directives   Simon Glass
• [U-Boot] [PATCH 17/39] dm: sata: dw_sata: Rename the dwc_ahsata private header   Simon Glass
• [U-Boot] [PATCH 18/39] dm: sata: dw_sata: Drop is_ready   Simon Glass
• [U-Boot] [PATCH 19/39] dm: sata: dw_sata: More ahci_init_one() futher down   Simon Glass
• [U-Boot] [PATCH 20/39] dm: sata: dw_sata: Set up common versions of operations   Simon Glass
• [U-Boot] [PATCH 21/39] dm: sata: Support driver model with the 'sata' command   Simon Glass
• [U-Boot] [PATCH 22/39] dm: sata: imx: Allow driver model to be used for sata   Simon Glass
• [U-Boot] [PATCH 23/39] dm: sata: Update the AHCI uclass to support operations   Simon Glass
• [U-Boot] [PATCH 24/39] dm: sata: dwc_ahsata: Add support for driver model   Simon Glass
• [U-Boot] [PATCH 25/39] dm: mmc: fsl_esdhc: Pass private data to internal functions   Simon Glass
• [U-Boot] [PATCH 26/39] dm: mmc: fsl_esdhc: Set up common versions of operations   Simon Glass
• [U-Boot] [PATCH 27/39] dm: mmc: fsl_esdhc: Detect reset failure   Simon Glass
• [U-Boot] [PATCH 28/39] dm: mmc: fsl_esdhc: Detect init failure   Simon Glass
• [U-Boot] [PATCH 29/39] dm: mmc: fsl_esdhc: Set up platform data   Simon Glass
• [U-Boot] [PATCH 30/39] dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()   Simon Glass
• [U-Boot] [PATCH 31/39] dm: mmc: fsl_esdhc: Update to support livetree   Simon Glass
• [U-Boot] [PATCH 32/39] dm: mmc: fsl_esdhc: Update to support MMC operations   Simon Glass
• [U-Boot] [PATCH 33/39] dm: imx: cm_fx6: Support driver model for SATA   Simon Glass
• [U-Boot] [PATCH 34/39] dm: imx: cm_fx6: Add device tree for cm_fx6   Simon Glass
• [U-Boot] [PATCH 35/39] dm: imx: cm_fx6: Add MMC support for CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH 36/39] dm: imx: cm_fx6: Enable more driver model support   Simon Glass
• [U-Boot] [PATCH 37/39] dm: imx: Move i.MX devices to use CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 38/39] dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 39/39] dm: mmc: Drop CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Simon Glass
• [U-Boot] [PATCH v1] cpu: Add Intel Tangier support   Simon Glass
• [U-Boot] at91: smartweb board fails with current HEAD   Simon Glass
• [U-Boot] [PATCH v2 08/13] usb: gadget: ether: Provide a way to read MAC address   Simon Glass
• [U-Boot] [PATCH v8 08/10] usb: host: ohci-generic: add CLOCK support   Simon Glass
• [U-Boot] [PATCH v9 03/10] clk: add clk_release_all()   Simon Glass
• [U-Boot] [PATCH v9 02/10] reset: add reset_release_all()   Simon Glass
• [U-Boot] [PATCH v9 07/10] usb: host: ehci-generic: add generic PHY support   Simon Glass
• [U-Boot] [PATCH v9 09/10] usb: host: ohci-generic: add RESET support   Simon Glass
• [U-Boot] [PATCH v9 10/10] usb: host: ohci-generic: add generic PHY support   Simon Glass
• [U-Boot] [PATCH v9 08/10] usb: host: ohci-generic: add CLOCK support   Simon Glass
• [U-Boot] [PATCH 2/2] atmel, at91: fix smartweb board   Simon Glass
• [U-Boot] [PATCH 1/5] dm: ofnode: use ofnode_read_bool() to check property existence   Simon Glass
• [U-Boot] [PATCH 2/5] dm: ofnode: simplify ofnode_read_prop()   Simon Glass
• [U-Boot] [PATCH 3/5] dm: ofnode: rename ofnode_read_prop() to ofnode_get_property()   Simon Glass
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Simon Glass
• [U-Boot] [PATCH 5/5] dm: ofnode: simplify ofnode_read_bool()   Simon Glass
• [U-Boot] [PATCH] serial: make serial_stub_* to static functions   Simon Glass
• [U-Boot] [PATCH] dm: include <dm/util.h> from drivers/core/util.c   Simon Glass
• [U-Boot] [PATCH] gpio: add static to get_function()   Simon Glass
• [U-Boot] [PATCH] dm: include <dm/util.h> from driver/core/dump.c   Simon Glass
• [U-Boot] [PATCH] dm: ofnode: use fdt32_t for DT property value to fix sparse warning   Simon Glass
• [U-Boot] [PATCH] dm: video: fix abuse of enum   Simon Glass
• [U-Boot] [PATCH 3/7] rockchip: rk3328: add sdram driver in U-Boot   Simon Glass
• [U-Boot] [PATCH 01/16] usb: xhci-pci: Drop non-DM version of xhci-pci driver   Simon Glass
• [U-Boot] [PATCH 02/16] usb: xhci-pci: Clean up the driver a little bit   Simon Glass
• [U-Boot] [PATCH 04/16] usb: hub: Use 'struct usb_hub_device' as hub device's uclass_priv   Simon Glass
• [U-Boot] mpc85xx boards   Simon Glass
• [U-Boot] [PATCH 06/16] usb: xhci: Change to use usb_hub_is_root_hub() API   Simon Glass
• [U-Boot] [PATCH 08/16] usb: hub: Support 'set hub depth' request for USB 3.0 hubs   Simon Glass
• [U-Boot] [PATCH 09/16] usb: xhci: Change xhci_setup_addressable_virt_dev() signature   Simon Glass
• [U-Boot] [PATCH 11/16] usb: hub: Parse and save TT details from device descriptor   Simon Glass
• [U-Boot] [PATCH 12/16] dm: usb: Add a new USB controller operation 'update_hub_device'   Simon Glass
• [U-Boot] [PATCH 13/16] usb: hub: Call usb_update_hub_device() after hub descriptor is fetched   Simon Glass
• [U-Boot] [PATCH 14/16] usb: xhci: Implement update_hub_device() operation   Simon Glass
• [U-Boot] [PATCH 15/16] usb: xhci: Correct TT_SLOT and TT_PORT macros   Simon Glass
• [U-Boot] [PATCH 16/16] usb: xhci: Enable TT to support LS/FS devices behind a HS hub   Simon Glass
• [U-Boot] mpc85xx boards   Simon Glass
• [U-Boot] [PATCH v3 00/35] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH] dm: include <dm/util.h> from drivers/core/util.c   Simon Glass
• [U-Boot] [PATCH v10 04/10] dm: core: add ofnode_count_phandle_with_args()   Simon Glass
• [U-Boot] [PATCH v10 06/10] usb: host: ehci-generic: add error path and .remove callback   Simon Glass
• [U-Boot] [PATCH v10 08/10] usb: host: ohci-generic: add CLOCK support   Simon Glass
• [U-Boot] [PATCH v10 09/10] usb: host: ohci-generic: add RESET support   Simon Glass
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Simon Glass
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Simon Glass
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   Simon Glass
• [U-Boot] [PATCH 07/16] usb: hub: Translate USB 3.0 hub port status into old version   Simon Glass
• [U-Boot] [PATCH 10/16] usb: xhci: Program 'route string' in the input slot context   Simon Glass
• [U-Boot] [PATCH] dtc: mkimage: Add the possibility to specify DTC   Simon Glass
• [U-Boot] [PATCH 1/3] arm: dts: meson: import dts files from Linux 4.12-rc6   Simon Glass
• [U-Boot] [PATCH 2/3] pinctrl: meson: add GPIO support   Simon Glass
• [U-Boot] [PATCH] net: usb: r8152: fix "duplicate 'const' declaration specifier"   Simon Glass
• [U-Boot] [PATCH] i2c_eeprom: add static to i2c_eeprom_std_ops/probe   Simon Glass
• [U-Boot] [PATCH 3/3] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Simon Glass
• [U-Boot] [PATCHv6 1/3] ARM64: dts: hi3798cv200-poplar: add device tree bindings   Simon Glass
• [U-Boot] [PATCHv6 2/3] driver: mmc: update debug info   Simon Glass
• [U-Boot] [PATCH v4 01/18] cmd: nand: abstract global variable usage for dm conversion   Simon Glass
• [U-Boot] [PATCH v2] mkimage: fix display of image types list   Simon Glass
• [U-Boot] [PATCH 1/5] libfdt.h: Introduce FDT_PATH_MAX   Simon Glass
• [U-Boot] [PATCH 2/5] libfdt_env.h: Add <malloc.h> in libfdt environment   Simon Glass
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Simon Glass
• [U-Boot] [PATCH 4/5] test: overlay: Add unit test for stacked overlay   Simon Glass
• [U-Boot] [PATCH 1/6] sunxi: A64: dts: replace EMAC .dtsi with symlink   Simon Glass
• [U-Boot] [PATCH 3/6] libfdt: add fdtdec_lookup_phandle_index()   Simon Glass
• [U-Boot] [PATCH 00/12] tegra: nyan-big: Support chainloading and add documentation   Simon Glass
• [U-Boot] [PATCH 4/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Simon Glass
• [U-Boot] [PATCH 6/6] net: sun8i-emac: add support for new DT binding   Simon Glass
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Simon Glass
• [U-Boot] CONFIG_USB_EHCI_HCD breaks xHCI drivers even on DM   Simon Glass
• [U-Boot] [U-Boot,03/13] rockchip: rk3066: add sysreset driver   Simon Glass
• [U-Boot] [PATCH] Makefile: add dependencies to regenerate u-boot.cfg when lost   Simon Glass
• [U-Boot] [PATCH v1 1/3] wdt: Fix spelling Resettting -> Resetting   Simon Glass
• [U-Boot] [PATCH v1 2/3] wdt: Timeout better to be in microseconds   Simon Glass
• [U-Boot] [PATCH v1 3/3] wdt: Unify option of timeout value   Simon Glass
• [U-Boot] [PATCH v2 1/3] x86: Add dma-mapping.h to architectural code   Simon Glass
• [U-Boot] [PATCH v3 3/3] x86: Add Intel Edison board files   Simon Glass
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 01/18] cmd: nand: abstract global variable usage for dm conversion   Simon Glass
• [U-Boot] [PATCH 00/12] tegra: nyan-big: Support chainloading and add documentation   Simon Glass
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Simon Glass
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH 01/30] Makefile: Rename 'env' target to 'environ'   Simon Glass
• [U-Boot] [PATCH 02/30] Move environment files from common/ to env/   Simon Glass
• [U-Boot] [PATCH 03/30] Convert CONFIG_ENV_IS_IN_MMC et al to Kconfig   Simon Glass
• [U-Boot] [PATCH 04/30] env: Move help from README to Kconfig   Simon Glass
• [U-Boot] [PATCH 05/30] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH 06/30] Convert CONFIG_ENV_IS_IN_NVRAM to Kconfig   Simon Glass
• [U-Boot] [PATCH 07/30] Convert CONFIG_ENV_IS_IN_EEPROM to Kconfig   Simon Glass
• [U-Boot] [PATCH 08/30] Convert CONFIG_ENV_IS_IN_DATAFLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH 09/30] Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH 10/30] Convert CONFIG_ENV_IS_IN_REMOTE to Kconfig   Simon Glass
• [U-Boot] [PATCH 11/30] Convert CONFIG_ENV_IS_IN_FAT to Kconfig   Simon Glass
• [U-Boot] [PATCH 12/30] env: common: Make env_get_addr/get_char_memory() static   Simon Glass
• [U-Boot] [PATCH 13/30] env: common: Drop env_get_addr()   Simon Glass
• [U-Boot] [PATCH 14/30] env: common: Factor out the common env_valid check   Simon Glass
• [U-Boot] [PATCH 15/30] env: common: Drop env_get_char_init()   Simon Glass
• [U-Boot] [PATCH 16/30] env: common: Drop env_get_char_memory()   Simon Glass
• [U-Boot] [PATCH 17/30] env: Add an enum for environment state   Simon Glass
• [U-Boot] [PATCH 18/30] env: Rename nand env_location to nand_env_location   Simon Glass
• [U-Boot] [PATCH 19/30] env: Create a location driver for each location   Simon Glass
• [U-Boot] [PATCH 20/30] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH 21/30] env: Switch over to use environment location drivers   Simon Glass
• [U-Boot] [PATCH 22/30] env: Drop common init() functions   Simon Glass
• [U-Boot] [PATCH 23/30] env: Drop the env_name_spec global   Simon Glass
• [U-Boot] [PATCH 24/30] env: Drop unused env_ptr variables   Simon Glass
• [U-Boot] [PATCH 25/30] env: Drop env_init_new()   Simon Glass
• [U-Boot] [PATCH 26/30] env: Drop env_get_char_spec()   Simon Glass
• [U-Boot] [PATCH 27/30] env: Drop env_relocate_spec() in favour of env_load()   Simon Glass
• [U-Boot] [PATCH 28/30] env: Drop saveenv() in favour of env_save()   Simon Glass
• [U-Boot] [PATCH 29/30] env: Adjust the get_char() method to return an int   Simon Glass
• [U-Boot] [PATCH 30/30] env: Adjust the load() method to return an error   Simon Glass
• [U-Boot] [PATCH] libfdt: Drop -FDT_ERR_TOODEEP   Simon Glass
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Simon Glass
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] U-Boot image with multiple u-Boot dt blobs selected at low level boot   Simon Glass
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Simon Glass
• [U-Boot] [PATCH 1/2] moveconfig: Tidy up imply flag parsing   Simon Glass
• [U-Boot] [PATCH 2/2] RFC: moveconfig: Use toolchains from buildman   Simon Glass
• [U-Boot] [PATCH v3 00/35] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH 28/30] env: Drop saveenv() in favour of env_save()   Simon Glass
• [U-Boot] [PATCH 1/2] rockchip: clk: rk3368: remove unused fields from rk3368_clk_priv   Simon Glass
• [U-Boot] [PATCH 2/2] rockchip: clk: rk3399: remove unused fields from priv-structures   Simon Glass
• [U-Boot] [PATCH] rockchip: clk: rk3368: use correct (i.e. 'rk3368_clk_priv') structure for auto-alloc   Simon Glass
• [U-Boot] [PATCH] dm: Fix typo in include-guard for dm-structs.h   Simon Glass
• [U-Boot] [PATCH] rockchip: spl: make boot0 hook TPL safe   Simon Glass
• [U-Boot] [PATCH v3 00/35] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH v4 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH v4 01/20] dm: core: Add ofnode_read_resource()   Simon Glass
• [U-Boot] [PATCH v4 02/20] dm: core: Fix up ofnode_get_addr_index() for 64-bit values   Simon Glass
• [U-Boot] [PATCH v4 03/20] tegra: spl: Enable debug UART   Simon Glass
• [U-Boot] [PATCH v4 04/20] tegra: tegra124: Add a PMC syscon driver   Simon Glass
• [U-Boot] [PATCH v4 05/20] dm: tegra: Convert USB setup to livetree   Simon Glass
• [U-Boot] [PATCH v4 06/20] dm: tegra: Convert clock_decode_periph_id() to support livetree   Simon Glass
• [U-Boot] [PATCH v4 07/20] dm: video: tegra124: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 08/20] tegra: dts: Move stdout-path to /chosen   Simon Glass
• [U-Boot] [PATCH v4 09/20] dm: tegra: gpio: Convert to support livetree   Simon Glass
• [U-Boot] [PATCH v4 10/20] dm: tegra: usb: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 11/20] dm: tegra: spi: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 12/20] dm: tegra: i2c: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 13/20] dm: tegra: pwm: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 14/20] dm: tegra: mmc: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 15/20] dm: tegra: pci: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 16/20] power: Add a regulator driver for the as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v4 17/20] power: Add a GPIO driver for the as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v4 18/20] dm: power: Convert as3722 to driver model   Simon Glass
• [U-Boot] [PATCH v4 19/20] fdtdec: Drop old compatible values   Simon Glass
• [U-Boot] [PATCH v4 20/20] dm: tegra: Move nyan-big, jetson-tk1/tx1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Simon Glass
• [U-Boot] [PATCH 1/3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Simon Glass
• [U-Boot] [PATCH v4 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH 1/3] dm: ahci: Add a generic PCI-based AHCI driver   Simon Glass
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: disk: iterate only over valid block devices   Simon Glass
• [U-Boot] [PATCH v2 02/15] dm: mmc: Allow disabling driver model in SPL   Simon Glass
• [U-Boot] [PATCH] tools: buildman: prevent trying to use the working directory as build dorectory   Simon Glass
• [U-Boot] [PATCH] dm: core: don't fail to iterate if first one fails to probe   Simon Glass
• [U-Boot] [PATCH] sandbox: Update defconfig for more build coverage   Simon Glass
• [U-Boot] [PATCH] sandbox: Enable more drivers for more build coverage   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: provide meaningful status code   Simon Glass
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH] dm: video: fix abuse of enum   Simon Glass
• [U-Boot] [PATCH 1/6] sunxi: A64: dts: replace EMAC .dtsi with symlink   Simon Glass
• [U-Boot] [PATCH 4/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Simon Glass
• [U-Boot] [PATCH v2 1/4] arm: dts: meson: import dts files from Linux 4.12   Simon Glass
• [U-Boot] [PATCH v2 3/4] odroid-c2: enable GPIO   Simon Glass
• [U-Boot] [PATCH 2/5] omap: Update the base address of the MMC controllers   Simon Glass
• [U-Boot] [PATCH v2 04/15] usb: hub: Remove hub_port_reset()   Simon Glass
• [U-Boot] [PATCH v2 06/15] usb: hub: Translate USB 3.0 hub port status into old version   Simon Glass
• [U-Boot] [PATCH v2 09/15] usb: xhci: Program 'route string' in the input slot context   Simon Glass
• [U-Boot] [PATCH 3/3] dm: syscon: scan sub-nodes of the syscon node   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3229: add dwc2 node for fastboot   Simon Glass
• [U-Boot] [PATCH] serial: ns16550: Add RX interrupt buffer support   Simon Glass
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3229: add dwc2 node for fastboot   Simon Glass
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Simon Glass
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Simon Glass
• [U-Boot] [PATCH] dm: core: Show driver name with 'dm tree'   Simon Glass
• [U-Boot] [PATCH 0/5] x86: bootstage: Fix bootstage operation on link   Simon Glass
• [U-Boot] [PATCH 1/5] board_f: Drop the timer after relocation   Simon Glass
• [U-Boot] [PATCH 2/5] dm: x86: Allow TSC timer to be used before DM is ready   Simon Glass
• [U-Boot] [PATCH 3/5] dm: x86: Update timer_get_boot_us to work before DM is ready   Simon Glass
• [U-Boot] [PATCH 4/5] bootstage: Drop unused options   Simon Glass
• [U-Boot] [PATCH 5/5] bootstage: Provide a separate record count setting for SPL   Simon Glass
• [U-Boot] [PATCH v2 1/9] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Simon Glass
• [U-Boot] [PATCH v2 3/9] powerpc: spl and normal u-boot stage set SYS_MALLOC_F indepently   Simon Glass
• [U-Boot] [PATCH v2 5/9] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Simon Glass
• [U-Boot] [PATCH v2 7/9] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Simon Glass
• [U-Boot] [PATCH v2 8/9] rockchip: use debug() instead of printf when back to bootrom   Simon Glass
• [U-Boot] [PATCH 05/30] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH 1/2] apalis_t30: fix usb otg power enable   Simon Glass
• [U-Boot] [PATCH 2/2] dm: tegra: move apalis t30/tk1, colibri t20/t30 to livetree   Simon Glass
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Simon Glass
• [U-Boot] [PATCH 1/6] ram: stm32: migrate fmc defines in driver file   Simon Glass
• [U-Boot] [PATCH 2/6] ram: stm32: get base address from DT   Simon Glass
• [U-Boot] [PATCH 3/6] ram: stm32: replace fdtdec_get by ofnode calls   Simon Glass
• [U-Boot] [PATCH 4/6] ram: stm32: add second SDRAM bank management   Simon Glass
• [U-Boot] [PATCH 5/6] ARM: DTS: stm32: remove useless mr-nbanks property   Simon Glass
• [U-Boot] [PATCH 6/6] ram: stm32: add stm32h7 support   Simon Glass
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Simon Glass
• [U-Boot] [PATCH 2/2] RFC: moveconfig: Use toolchains from buildman   Simon Glass
• [U-Boot] [PATCH v4 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH 01/51] i2c: fsl_i2c: Fix style violations   Simon Glass
• [U-Boot] [PATCH 02/51] i2c: fsl_i2c: Remove inline declarations   Simon Glass
• [U-Boot] [PATCH 03/51] gdsys: Post ppc4xx removal cleanup   Simon Glass
• [U-Boot] [PATCH 04/51] net: phy: marvell: Fix style violations   Simon Glass
• [U-Boot] [PATCH 05/51] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Simon Glass
• [U-Boot] [PATCH 06/51] cmd: Add command for calculating binary operations   Simon Glass
• [U-Boot] [PATCH 07/51] phy: Allow forcing clause 45 access   Simon Glass
• [U-Boot] [PATCH 08/51] phy: Fix style violations   Simon Glass
• [U-Boot] [PATCH 09/51] phy: Support Marvell 88X2242   Simon Glass
• [U-Boot] [PATCH 10/51] net:phy:marvell Add hook for m88e1510 board config   Simon Glass
• [U-Boot] [PATCH 11/51] powerpc: mpc83xx: Implement get_serial_clock()   Simon Glass
• [U-Boot] [PATCH 12/51] cfi_flash: Fix style violations   Simon Glass
• [U-Boot] [PATCH 13/51] cfi_flash: Clean up code some more   Simon Glass
• [U-Boot] [PATCH 14/51] cfi_flash: Always define cfi_flash_num_flash_banks   Simon Glass
• [U-Boot] [PATCH 15/51] gpio: mpc85xx_gpio: Fix style violations   Simon Glass
• [U-Boot] [PATCH 16/51] gpio: mpc85xx_gpio: Make compatible with MPC8XXX   Simon Glass
• [U-Boot] [PATCH 17/51] cmd: mdio: Fix style violations   Simon Glass
• [U-Boot] [PATCH 18/51] cmd: mdio: Add 'driver' subcommand   Simon Glass
• [U-Boot] [PATCH 19/51] common: board_f: Fix style violations   Simon Glass
• [U-Boot] [PATCH 20/51] common: board_r: Fix style violations   Simon Glass
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Simon Glass
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Simon Glass
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Simon Glass
• [U-Boot] [PATCH 21/51] common: Extend board-specific DT fixup   Simon Glass
• [U-Boot] [PATCH 22/51] gdsys: mpc8308: Fix style violations   Simon Glass
• [U-Boot] [PATCH 23/51] gdsys: mpc8308: Use shadow register for output GPIO values   Simon Glass
• [U-Boot] [PATCH 24/51] gdsys: mpc8308: Move SYS_FPGA{0, 1}_{BASE, SIZE} to Kconfig   Simon Glass
• [U-Boot] [PATCH 25/51] gdsys: Introduce GDSYS_LEGACY_DRIVERS   Simon Glass
• [U-Boot] [PATCH 26/51] strider, hrcon: Reset CAT phy on CON2 module   Simon Glass
• [U-Boot] [PATCH 27/51] gdsys:phy: Adapt fixup_88e1518() to latest Release Notes   Simon Glass
• [U-Boot] [PATCH 28/51] i2c: ihs_i2c: Prepare DM conversion   Simon Glass
• [U-Boot] [PATCH 29/51] i2c: ihs_i2c: Make DM compatible   Simon Glass
• [U-Boot] [PATCH 30/51] i2c: ihs_i2c: Factor out send_buffer method   Simon Glass
• [U-Boot] [PATCH 31/51] gdsys: mpc8308: Add FPGA flavor option   Simon Glass
• [U-Boot] [PATCH 35/51] drivers: Add ICS8N3QV01 driver   Simon Glass
• [U-Boot] [PATCH 33/51] drivers: Add transmitter uclass   Simon Glass
• [U-Boot] [PATCH 34/51] transmitter: Add Xilinx LogiCore DP TX   Simon Glass
• [U-Boot] [PATCH 32/51] drivers: Add ihs_fpga and gdsys_soc drivers   Simon Glass
• [U-Boot] [PATCH 36/51] drivers: Add ihs_axi driver   Simon Glass
• [U-Boot] [PATCH 37/51] drivers: Add ihs_video_out driver   Simon Glass
• [U-Boot] [PATCH 38/51] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Simon Glass
• [U-Boot] [PATCH 39/51] drivers: Add gdsys_ioep driver   Simon Glass
• [U-Boot] [PATCH 40/51] cmd: Add ihs osd commands   Simon Glass
• [U-Boot] [PATCH 41/51] cmd: Add ihs axi command   Simon Glass
• [U-Boot] [PATCH 42/51] cmd: Add ihs fpga command   Simon Glass
• [U-Boot] [PATCH 43/51] gdsys: cmd_ioloop: Fix style violations   Simon Glass
• [U-Boot] [PATCH 44/51] gdsys: cmd_ioloop: Introduce commenting enum   Simon Glass
• [U-Boot] [PATCH 45/51] gdsys: cmd_ioloop: Make DM compatible   Simon Glass
• [U-Boot] [PATCH 46/51] ihs_mdio: Add support to force clause45 access   Simon Glass
• [U-Boot] [PATCH 47/51] ihs_mdio: Fix style violations   Simon Glass
• [U-Boot] [PATCH 48/51] ihs_mdio: Make DM-compatible   Simon Glass
• [U-Boot] [PATCH 49/51] gazerbeam: Import Linux DT   Simon Glass
• [U-Boot] [PATCH 50/51] gazerbeam: Add u-boot specific dts include file   Simon Glass
• [U-Boot] [PATCH 51/51] mpc83xx: Add gazerbeam board   Simon Glass
• [U-Boot] [PATCH 06/51] cmd: Add command for calculating binary operations   Simon Glass
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Simon Glass
• [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Simon Glass
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Simon Glass
• [U-Boot] [PATCH 00/41] Kconfig: Convert remaining commands to Kconfig   Simon Glass
• [U-Boot] [PATCH 01/41] Convert CONFIG_CMD_MAX6957 to Kconfig   Simon Glass
• [U-Boot] [PATCH 02/41] Kconfig: Drop CONFIG_CMD_MEM   Simon Glass
• [U-Boot] [PATCH 03/41] Convert CONFIG_CMD_MFSL to Kconfig   Simon Glass
• [U-Boot] [PATCH 04/41] Convert CONFIG_CMD_MMC_SPI to Kconfig   Simon Glass
• [U-Boot] [PATCH 05/41] Convert CONFIG_CMD_MTDPARTS to Kconfig   Simon Glass
• [U-Boot] [PATCH 06/41] Convert CONFIG_CMD_MTDPARTS_SPREAD to Kconfig   Simon Glass
• [U-Boot] [PATCH 07/41] Convert CONFIG_CMD_ONENAND to Kconfig   Simon Glass
• [U-Boot] [PATCH 08/41] Convert CONFIG_CMD_PCA953X to Kconfig   Simon Glass
• [U-Boot] [PATCH 09/41] Kconfig: Drop CONFIG_CMD_PCA953X_INFO   Simon Glass
• [U-Boot] [PATCH 10/41] Convert CONFIG_CMD_PCI to Kconfig   Simon Glass
• [U-Boot] [PATCH 11/41] Kconfig: Drop CONFIG_CMD_PCI_ENUM   Simon Glass
• [U-Boot] [PATCH 12/41] Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driver   Simon Glass
• [U-Boot] [PATCH 13/41] Convert CONFIG_CMD_PCMCIA to Kconfig   Simon Glass
• [U-Boot] [PATCH 14/41] Kconfig: Drop CONFIG_CMD_PORTIO and associated command   Simon Glass
• [U-Boot] [PATCH 15/41] Kconfig: Convert CMD_READ to Kconfig   Simon Glass
• [U-Boot] [PATCH 16/41] Convert CONFIG_CMD_REGINFO to Kconfig   Simon Glass
• [U-Boot] [PATCH 17/41] Convert CONFIG_CMD_REISER to Kconfig   Simon Glass
• [U-Boot] [PATCH 18/41] Kconfig: sandbox: Drop CONFIG_CMD_SANDBOX option   Simon Glass
• [U-Boot] [PATCH 19/41] Convert CONFIG_CMD_SAVES to Kconfig   Simon Glass
• [U-Boot] [PATCH 20/41] Convert CONFIG_CMD_SCSI to Kconfig   Simon Glass
• [U-Boot] [PATCH 21/41] Convert CONFIG_CMD_SDRAM to Kconfig   Simon Glass
• [U-Boot] [PATCH 22/41] Convert CONFIG_CMD_SF_TEST to Kconfig   Simon Glass
• [U-Boot] [PATCH 23/41] Convert CONFIG_CMD_SH_ZIMAGEBOOT to Kconfig   Simon Glass
• [U-Boot] [PATCH 24/41] Convert CONFIG_CMD_SPL to Kconfig   Simon Glass
• [U-Boot] [PATCH 25/41] Convert CONFIG_CMD_SPL_NAND_OFS to Kconfig   Simon Glass
• [U-Boot] [PATCH 26/41] Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig   Simon Glass
• [U-Boot] [PATCH 27/41] Convert CONFIG_CMD_STRINGS to Kconfig   Simon Glass
• [U-Boot] [PATCH 28/41] gpio: Drop sx151x driver   Simon Glass
• [U-Boot] [PATCH 29/41] Convert CONFIG_CMD_TCA642X to Kconfig   Simon Glass
• [U-Boot] [PATCH 30/41] Convert CONFIG_CMD_TERMINAL to Kconfig   Simon Glass
• [U-Boot] [PATCH 31/41] Kconfig: Drop CONFIG_CMD_TFTP   Simon Glass
• [U-Boot] [PATCH 32/41] Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig   Simon Glass
• [U-Boot] [PATCH 33/41] Convert CONFIG_CMD_YAFFS2 to Kconfig   Simon Glass
• [U-Boot] [PATCH 34/41] Convert CONFIG_CMD_TRACE to Kconfig   Simon Glass
• [U-Boot] [PATCH 35/41] Convert CONFIG_CMD_TSI148 to Kconfig   Simon Glass
• [U-Boot] [PATCH 36/41] Convert CONFIG_CMD_UNIVERSE to Kconfig   Simon Glass
• [U-Boot] [PATCH 37/41] Convert CONFIG_CMD_UUID to Kconfig   Simon Glass
• [U-Boot] [PATCH 38/41] Convert CONFIG_CMD_ZBOOT to Kconfig   Simon Glass
• [U-Boot] [PATCH 39/41] Convert CONFIG_CMD_ZFS to Kconfig   Simon Glass
• [U-Boot] [PATCH 40/41] Drop config_cmd_all.h   Simon Glass
• [U-Boot] [PATCH 41/41] README: Drop information about commands   Simon Glass
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Simon Glass
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Simon Glass
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Simon Glass
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH v2 01/34] configs: Resync with savedefconfig   Simon Glass
• [U-Boot] [PATCH v2 02/34] Makefile: Rename 'env' target to 'environ'   Simon Glass
• [U-Boot] [PATCH v2 03/34] Move environment files from common/ to env/   Simon Glass
• [U-Boot] [PATCH v2 04/34] Convert CONFIG_ENV_IS_IN_MMC et al to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 05/34] env: Move help from README to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 06/34] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 07/34] Convert CONFIG_ENV_IS_IN_NVRAM to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 08/34] Convert CONFIG_ENV_IS_IN_EEPROM to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 09/34] Convert CONFIG_ENV_IS_IN_DATAFLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 10/34] Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 11/34] Convert CONFIG_ENV_IS_IN_REMOTE to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 12/34] Convert CONFIG_ENV_IS_IN_FAT to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 13/34] Convert CONFIG_ENV_IS_IN_ONENAND to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 14/34] env: common: Make env_get_addr/get_char_memory() static   Simon Glass
• [U-Boot] [PATCH v2 15/34] env: common: Drop env_get_addr()   Simon Glass
• [U-Boot] [PATCH v2 16/34] env: common: Factor out the common env_valid check   Simon Glass
• [U-Boot] [PATCH v2 17/34] env: common: Drop env_get_char_init()   Simon Glass
• [U-Boot] [PATCH v2 18/34] env: common: Drop env_get_char_memory()   Simon Glass
• [U-Boot] [PATCH v2 19/34] env: Add an enum for environment state   Simon Glass
• [U-Boot] [PATCH v2 20/34] env: Rename nand env_location to nand_env_location   Simon Glass
• [U-Boot] [PATCH v2 21/34] env: Create a location driver for each location   Simon Glass
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH v2 23/34] env: Switch over to use environment location drivers   Simon Glass
• [U-Boot] [PATCH v2 24/34] env: Drop common init() functions   Simon Glass
• [U-Boot] [PATCH v2 25/34] env: Drop the env_name_spec global   Simon Glass
• [U-Boot] [PATCH v2 26/34] env: Drop unused env_ptr variables   Simon Glass
• [U-Boot] [PATCH v2 27/34] env: Drop env_init_new()   Simon Glass
• [U-Boot] [PATCH v2 28/34] env: Drop env_get_char_spec()   Simon Glass
• [U-Boot] [PATCH v2 29/34] env: Drop env_relocate_spec() in favour of env_load()   Simon Glass
• [U-Boot] [PATCH v2 30/34] env: Drop saveenv() in favour of env_save()   Simon Glass
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Simon Glass
• [U-Boot] [PATCH v2 32/34] env: Rename getenv() and friends to env_get()   Simon Glass
• [U-Boot] [PATCH v2 33/34] env: Adjust the get_char() method to return an int   Simon Glass
• [U-Boot] [PATCH v2 34/34] env: Adjust the load() method to return an error   Simon Glass
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Simon Glass
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Simon Glass
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Simon Glass
• [U-Boot] [PATCH v4 18/20] dm: power: Convert as3722 to driver model   Simon Glass
• [U-Boot] [PATCH v5 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH v5 01/20] dm: core: Add ofnode_read_resource()   Simon Glass
• [U-Boot] [PATCH v5 02/20] dm: core: Fix up ofnode_get_addr_index() for 64-bit values   Simon Glass
• [U-Boot] [PATCH v5 03/20] tegra: spl: Enable debug UART   Simon Glass
• [U-Boot] [PATCH v5 04/20] tegra: tegra124: Add a PMC syscon driver   Simon Glass
• [U-Boot] [PATCH v5 05/20] dm: tegra: Convert USB setup to livetree   Simon Glass
• [U-Boot] [PATCH v5 06/20] dm: tegra: Convert clock_decode_periph_id() to support livetree   Simon Glass
• [U-Boot] [PATCH v5 07/20] dm: video: tegra124: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 08/20] tegra: dts: Move stdout-path to /chosen   Simon Glass
• [U-Boot] [PATCH v5 09/20] dm: tegra: gpio: Convert to support livetree   Simon Glass
• [U-Boot] [PATCH v5 10/20] dm: tegra: usb: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 11/20] dm: tegra: spi: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 12/20] dm: tegra: i2c: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 13/20] dm: tegra: pwm: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 14/20] dm: tegra: mmc: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 15/20] dm: tegra: pci: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 16/20] power: Add a regulator driver for the as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v5 17/20] power: Add a GPIO driver for the as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v5 18/20] dm: power: Convert as3722 to driver model   Simon Glass
• [U-Boot] [PATCH v5 19/20] fdtdec: Drop old compatible values   Simon Glass
• [U-Boot] [PATCH v5 20/20] dm: tegra: Move nyan-big, jetson-tk1/tx1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Simon Glass
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH v3 00/24] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH v3 01/24] Makefile: Rename 'env' target to 'environ'   Simon Glass
• [U-Boot] [PATCH v3 02/24] Move environment files from common/ to env/   Simon Glass
• [U-Boot] [PATCH v3 03/24] env: Move help from README to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 04/24] env: common: Make env_get_addr/get_char_memory() static   Simon Glass
• [U-Boot] [PATCH v3 05/24] env: common: Drop env_get_addr()   Simon Glass
• [U-Boot] [PATCH v3 06/24] env: common: Factor out the common env_valid check   Simon Glass
• [U-Boot] [PATCH v3 07/24] env: common: Drop env_get_char_init()   Simon Glass
• [U-Boot] [PATCH v3 08/24] env: common: Drop env_get_char_memory()   Simon Glass
• [U-Boot] [PATCH v3 09/24] env: Add an enum for environment state   Simon Glass
• [U-Boot] [PATCH v3 10/24] env: Rename nand env_location to nand_env_location   Simon Glass
• [U-Boot] [PATCH v3 11/24] env: Create a location driver for each location   Simon Glass
• [U-Boot] [PATCH v3 12/24] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH v3 13/24] env: Switch over to use environment location drivers   Simon Glass
• [U-Boot] [PATCH v3 14/24] env: Drop common init() functions   Simon Glass
• [U-Boot] [PATCH v3 15/24] env: Drop the env_name_spec global   Simon Glass
• [U-Boot] [PATCH v3 16/24] env: Drop unused env_ptr variables   Simon Glass
• [U-Boot] [PATCH v3 17/24] env: Drop env_init_new()   Simon Glass
• [U-Boot] [PATCH v3 18/24] env: Drop env_get_char_spec()   Simon Glass
• [U-Boot] [PATCH v3 19/24] env: Drop env_relocate_spec() in favour of env_load()   Simon Glass
• [U-Boot] [PATCH v3 20/24] env: Drop saveenv() in favour of env_save()   Simon Glass
• [U-Boot] [PATCH v3 21/24] env: Rename setenv() and friends to env_set()   Simon Glass
• [U-Boot] [PATCH v3 22/24] env: Rename getenv() and friends to env_get()   Simon Glass
• [U-Boot] [PATCH v3 23/24] env: Adjust the get_char() method to return an int   Simon Glass
• [U-Boot] [PATCH v3 24/24] env: Adjust the load() method to return an error   Simon Glass
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Simon Glass
• [U-Boot] [PATCH 1/4] rockchip: dts: correct vdd_log setting for firefly-rk3399   Simon Glass
• [U-Boot] [PATCH 2/4] power: pwm_regulator: fix the pwm_set_config parameter order   Simon Glass
• [U-Boot] [PATCH 3/4] power: pwm_regulator: remove redundance code   Simon Glass
• [U-Boot] [PATCH 4/4] rockchip: pwm: add mask for config setting   Simon Glass
• [U-Boot] [PATCH 1/2] rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL   Simon Glass
• [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: put EFI partition entries at 2MB   Simon Glass
• [U-Boot] [PATCH 1/5] rockchip: rk322x: update dram bank size   Simon Glass
• [U-Boot] [PATCH v2 01/56] spl: add a 'return to bootrom' boot method   Simon Glass
• [U-Boot] [PATCH 0/3] console: Tidy up console_dev_is_serial()   Simon Glass
• [U-Boot] [PATCH 1/3] test/py: Handle the banner being printed after relocation   Simon Glass
• [U-Boot] [PATCH 2/3] console: Unify the check for a serial console   Simon Glass
• [U-Boot] [PATCH 3/3] dm: console: Check for serial devices properly   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC via Kconfig   Simon Glass
• [U-Boot] [PATCH] rockchip: timer: make register sizes explicit   Simon Glass
• [U-Boot] [PATCH] rockchip: efuse: dm: change to use dev_read_addr   Simon Glass
• [U-Boot] [PATCH v2 02/56] spl: configure 'return to bootrom' separately for SPL and TPL   Simon Glass
• [U-Boot] [PATCH v2 03/56] rockchip: back-to-bootrom: add 'back-to-bootrom' support for AArch64   Simon Glass
• [U-Boot] [PATCH v2 04/56] rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL   Simon Glass
• [U-Boot] [PATCH v2 05/56] rockchip: back-to-bootrom: simplify the #ifdef-check for LIBGENERIC in TPL/SPL   Simon Glass
• [U-Boot] [PATCH v2 06/56] spl: dm: Kconfig: use more specific prereqs for SPL_REGMAP and SPL_SYSCON   Simon Glass
• [U-Boot] [PATCH v2 07/56] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL   Simon Glass
• [U-Boot] [PATCH v2 08/56] spl: dm: Kconfig: SPL_RAM depends on SPL_DM   Simon Glass
• [U-Boot] [PATCH v2 09/56] spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)   Simon Glass
• [U-Boot] [PATCH v2 10/56] spl: dm: Kconfig: SPL_CLK depens on SPL_DM   Simon Glass
• [U-Boot] [PATCH v2 11/56] spl: dm: Kconfig: split CLK support for SPL and TPL   Simon Glass
• [U-Boot] [PATCH v2 12/56] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL   Simon Glass
• [U-Boot] [PATCH v2 13/56] spl: dm: use CONFIG_IS_ENABLED to test for the DM option   Simon Glass
• [U-Boot] [PATCH v2 15/56] armv8: spl: Support separate stack for TPL   Simon Glass
• [U-Boot] [PATCH v2 17/56] spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL   Simon Glass
• [U-Boot] [PATCH v2 18/56] lib: spl: differentiate between TPL and SPL for libfdt/of_control/of_platdata   Simon Glass
• [U-Boot] [PATCH v2 19/56] spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds   Simon Glass
• [U-Boot] [PATCH v2 20/56] spl: add TPL_DRIVER_MISC_SUPPORT option   Simon Glass
• [U-Boot] [PATCH v2 21/56] drivers: spl: consistently use the $(SPL_TPL_) macro   Simon Glass
• [U-Boot] [PATCH v2 22/56] rockchip: Makefile: allow selective inclusion of sdram_common.o from TPL/SPL/U-Boot   Simon Glass
• [U-Boot] [PATCH v2 23/56] rockchip: rk3368: improve Kconfig text for the RK3368   Simon Glass
• [U-Boot] [PATCH v2 24/56] rockchip: rk3368: mkimage: add support for the RK3368   Simon Glass
• [U-Boot] [PATCH v2 25/56] rockchip: rk3368: pmugrf: add definitions for os_reg[0..3]   Simon Glass
• [U-Boot] [PATCH v2 26/56] rockchip: rk3368: spl: define COUNTER_FREQUENCY to 24MHz   Simon Glass
• [U-Boot] [PATCH v2 27/56] rockchip: rk3368: spl: add memory layout for TPL and SPL   Simon Glass
• [U-Boot] [PATCH v2 28/56] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Simon Glass
• [U-Boot] [PATCH v2 29/56] rockchip: rk3368: grf: use shifted-constants   Simon Glass
• [U-Boot] [PATCH v2 30/56] rockchip: pinctrl: rk3368: add GMAC (RGMII only) support   Simon Glass
• [U-Boot] [PATCH v2 31/56] rockchip: pinctrl: rk3368: add support for configuring the MMC pins   Simon Glass
• [U-Boot] [PATCH v2 32/56] rockchip: pinctrl: rk3368: move IOMUX bit-definitions to pinctrl driver   Simon Glass
• [U-Boot] [PATCH v2 33/56] rockchip: pinctrl: rk3368: add SPI support   Simon Glass
• [U-Boot] [PATCH v2 34/56] rockchip: clk: rk3368: implement bandwidth adjust for PLLs   Simon Glass
• [U-Boot] [PATCH v2 35/56] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Simon Glass
• [U-Boot] [PATCH v2 36/56] rockchip: clk: rk3368: do not change CPLL/GPLL before returning to BROM   Simon Glass
• [U-Boot] [PATCH v2 37/56] rockchip: clk: rk3368: implement DPLL (DRAM PLL) support   Simon Glass
• [U-Boot] [PATCH v2 38/56] rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ   Simon Glass
• [U-Boot] [PATCH v2 39/56] rockchip: clk: rk3368: implement MMC/SD clock reparenting   Simon Glass
• [U-Boot] [PATCH v2 40/56] rockchip: clk: rk3368: support configuring the DRAM PLL (from TPL)   Simon Glass
• [U-Boot] [PATCH v2 41/56] rockchip: clk: rk3368: add support for GMAC (SLCK_MAC) clock   Simon Glass
• [U-Boot] [PATCH v2 42/56] rockchip: clk: rk3368: mark 'priv' __maybe_unused in rk3368_clk_set_rate()   Simon Glass
• [U-Boot] [PATCH v2 43/56] rockchip: clk: rk3368: add support for configuring the SPI clocks   Simon Glass
• [U-Boot] [PATCH v2 44/56] net: gmac_rockchip: Add support for the RK3368 GMAC   Simon Glass
• [U-Boot] [PATCH v2 45/56] rockchip: Makefile: streamline SPL/TPL configuration   Simon Glass
• [U-Boot] [PATCH v2 46/56] rockchip: rk3368: add DRAM controller driver with DRAM initialisation   Simon Glass
• [U-Boot] [PATCH v2 47/56] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Simon Glass
• [U-Boot] [PATCH v2 48/56] rockchip: rk3368: spl: enable SPL_FRAMEWORK in rk3368_common.h   Simon Glass
• [U-Boot] [PATCH v2 49/56] rockchip: rk3368: spl: add TPL support   Simon Glass
• [U-Boot] [PATCH v2 50/56] rockchip: spl: make spl-boot-order code reusable (split from rk3399)   Simon Glass
• [U-Boot] [PATCH v2 51/56] rockchip: rk3368: spl: add SPL support   Simon Glass
• [U-Boot] [PATCH v2 52/56] rockchip: rk3368: spl: mark SPL and TPL as supported for ROCKCHIP_RK3368   Simon Glass
• [U-Boot] [PATCH v2 53/56] rockchip: spi: enable support for the rk_spi driver for the RK3368   Simon Glass
• [U-Boot] [PATCH v2 54/56] rockchip: board: lion-rk3368: add support for the RK3368-uQ7   Simon Glass
• [U-Boot] [PATCH v2 55/56] rockchip: board: puma-rk3399: fix warnings in puma_rk3399/fit_spl_atf.its   Simon Glass
• [U-Boot] [PATCH v2 56/56] rockchip: board: puma_rk3399: rename ATF firmware   Simon Glass
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH v11 07/10] usb: host: ehci-generic: add generic PHY support   Simon Glass
• [U-Boot] [PATCH v11 10/10] usb: host: ohci-generic: add generic PHY support   Simon Glass
• [U-Boot] [PATCH] dm: ofnode: change return type of dev_read_prop() to opaque pointer   Simon Glass
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Simon Glass
• [U-Boot] [PATCH 1/2] sandbox: remove os_putc() and os_puts()   Simon Glass
• [U-Boot] [PATCH 2/2] console: simplify puts()   Simon Glass
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v9 04/10] usb: phy: Add STi USB2 PHY   Simon Glass
• [U-Boot] [PATCH v9 07/10] usb: dwc3: Add dwc3 glue driver support for STi   Simon Glass
• [U-Boot] [PATCH RESEND] ahci: dm: Fix memory allocation for uclass private data   Simon Glass
• [U-Boot] [PATCH v2 2/7] efi_loader: implement multiple event support   Simon Glass
• [U-Boot] [PATCH v3 05/15] usb: hub: Add a new API to test if a hub device is root hub   Simon Glass
• [U-Boot] [PATCH] clk: Kconfig: Add dependences of SPL_CLK   Simon Glass
• [U-Boot] [PATCH 1/6] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Simon Glass
• [U-Boot] [PATCH 2/6] ARM: at91: spl: Add mck function to lower rate while switching   Simon Glass
• [U-Boot] [PATCH 3/6] ARM: at91: spl: Add boot device for boot from QSPI   Simon Glass
• [U-Boot] [PATCH 4/6] ARM: at91: mach: Add missing defines of MPDDRC   Simon Glass
• [U-Boot] [PATCH 5/6] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Simon Glass
• [U-Boot] [PATCH 6/6] board: atmel: Add SAMA5D27 SOM1 EK board   Simon Glass
• [U-Boot] [PATCH] board: sama5d2_xplained: Make SPL work on spiflash   Simon Glass
• [U-Boot] [PATCH v2 12/15] dm: scsi: Don't scan the SCSI bus when probing   Simon Glass
• [U-Boot] [PATCH v5 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH v5 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Simon Glass
• [U-Boot] [PATCH 00/39] dm: sata: Complete driver-model support for SATA   Simon Glass
• [U-Boot] [PATCH 1/3] dm: ahci: Add a generic PCI-based AHCI driver   Simon Glass
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH 0/5] uboot overlays and FIT image   Simon Glass
• [U-Boot] [PATCH 1/3] test/py: Handle the banner being printed after relocation   Simon Glass
• [U-Boot] [PATCH v2 00/40] dm: sata: Complete driver-model support for SATA   Simon Glass
• [U-Boot] [PATCH v2 01/40] dm: core: Avoid calling dm_scan_fdt_dev() with of-platdata   Simon Glass
• [U-Boot] [PATCH v2 02/40] dm: blk: Add a function to find an interface-type name   Simon Glass
• [U-Boot] [PATCH v2 03/40] dm: blk: Add a generic function for block device commands   Simon Glass
• [U-Boot] [PATCH v2 04/40] dm: sata: Adjust the 'sata' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH v2 05/40] dm: scsi: Adjust the 'scsi' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH v2 06/40] dm: ide: Adjust the 'ide' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH v2 07/40] dm: usb: Adjust the 'usb' command to use blk_common_cmd()   Simon Glass
• [U-Boot] [PATCH v2 08/40] dm: blk: Update return value in blk_create_devicef()   Simon Glass
• [U-Boot] [PATCH v2 09/40] dm: core: Add a comment about the device_remove() flags   Simon Glass
• [U-Boot] [PATCH v2 10/40] dm: sata: dwc_ahsata: Make functions static   Simon Glass
• [U-Boot] [PATCH v2 11/40] dm: sata: dw_sata: Drop dwc_ahsata_rw_ncq_cmd()   Simon Glass
• [U-Boot] [PATCH v2 12/40] dm: sata: dw_sata: Move exported functions to the end   Simon Glass
• [U-Boot] [PATCH v2 13/40] dm: sata: dw_sata: Rename 'probe_ent' to uc_priv   Simon Glass
• [U-Boot] [PATCH v2 14/40] dm: sata: dw_sata: Drop unnecessary casts   Simon Glass
• [U-Boot] [PATCH v2 15/40] dm: sata: dw_sata: Pass uc_priv to internal functions   Simon Glass
• [U-Boot] [PATCH v2 16/40] dm: sata: dw_sata: Drop unnecessary brackets   Simon Glass
• [U-Boot] [PATCH v2 17/40] dm: sata: dw_sata: Sort #include directives   Simon Glass
• [U-Boot] [PATCH v2 18/40] dm: sata: dw_sata: Rename the dwc_ahsata private header   Simon Glass
• [U-Boot] [PATCH v2 19/40] dm: sata: dw_sata: Drop is_ready   Simon Glass
• [U-Boot] [PATCH v2 20/40] dm: sata: dw_sata: More ahci_init_one() futher down   Simon Glass
• [U-Boot] [PATCH v2 21/40] dm: sata: dw_sata: Set up common versions of operations   Simon Glass
• [U-Boot] [PATCH v2 22/40] dm: sata: Support driver model with the 'sata' command   Simon Glass
• [U-Boot] [PATCH v2 23/40] dm: sata: imx: Allow driver model to be used for sata   Simon Glass
• [U-Boot] [PATCH v2 24/40] dm: sata: Update the AHCI uclass to support operations   Simon Glass
• [U-Boot] [PATCH v2 25/40] dm: sata: dwc_ahsata: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v2 26/40] dm: mmc: fsl_esdhc: Pass private data to internal functions   Simon Glass
• [U-Boot] [PATCH v2 27/40] dm: mmc: fsl_esdhc: Set up common versions of operations   Simon Glass
• [U-Boot] [PATCH v2 28/40] dm: mmc: fsl_esdhc: Detect reset failure   Simon Glass
• [U-Boot] [PATCH v2 29/40] dm: mmc: fsl_esdhc: Detect init failure   Simon Glass
• [U-Boot] [PATCH v2 30/40] dm: mmc: fsl_esdhc: Set up platform data   Simon Glass
• [U-Boot] [PATCH v2 31/40] dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()   Simon Glass
• [U-Boot] [PATCH v2 32/40] dm: mmc: fsl_esdhc: Update to support livetree   Simon Glass
• [U-Boot] [PATCH v2 33/40] dm: mmc: fsl_esdhc: Update to support MMC operations   Simon Glass
• [U-Boot] [PATCH v2 34/40] dm: imx: cm_fx6: Support driver model for SATA   Simon Glass
• [U-Boot] [PATCH v2 35/40] dm: imx: cm_fx6: Add device tree for cm_fx6   Simon Glass
• [U-Boot] [PATCH v2 36/40] dm: imx: cm_fx6: Add MMC support for CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH v2 37/40] dm: imx: cm_fx6: Enable more driver model support   Simon Glass
• [U-Boot] [PATCH v2 38/40] dm: imx: Move i.MX devices to use CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH v2 39/40] dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH v2 40/40] dm: mmc: Drop CONFIG_DM_MMC_OPS   Simon Glass
• [U-Boot] [PATCH 2/3] am335x_hs_evm: Disable CONFIG_SPL_ENV_SUPPORT   Simon Glass
• [U-Boot] [PATCH] mkimage: check environment for dtc binary location   Simon Glass
• [U-Boot] [PATCH 1/3] clk: zynqmp: Add support for CCF driver   Simon Glass
• [U-Boot] [PATCH 2/3] clk: zynqmp: Dont panic incase of mmio write/read failures   Simon Glass
• [U-Boot] [PATCH 3/3] clk: zynqmp: Remove unused macros/variables   Simon Glass
• [U-Boot] [PATCH] arm64: zynqmp: Move dts zcu102 to zcu102-revA   Simon Glass
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v4 00/29] env: Move environment code to use location drivers   Simon Glass
• [U-Boot] [PATCH v4 01/29] Makefile: Rename 'env' target to 'environ'   Simon Glass
• [U-Boot] [PATCH v4 02/29] Move environment files from common/ to env/   Simon Glass
• [U-Boot] [PATCH v4 03/29] env: Move help from README to Kconfig   Simon Glass
• [U-Boot] [PATCH v4 04/29] env: common: Make env_get_addr/get_char_memory() static   Simon Glass
• [U-Boot] [PATCH v4 05/29] env: common: Drop env_get_addr()   Simon Glass
• [U-Boot] [PATCH v4 06/29] env: common: Factor out the common env_valid check   Simon Glass
• [U-Boot] [PATCH v4 07/29] env: common: Drop env_get_char_init()   Simon Glass
• [U-Boot] [PATCH v4 08/29] env: common: Drop env_get_char_memory()   Simon Glass
• [U-Boot] [PATCH v4 09/29] env: Add an enum for environment state   Simon Glass
• [U-Boot] [PATCH v4 10/29] env: Rename nand env_location to nand_env_location   Simon Glass
• [U-Boot] [PATCH v4 11/29] env: Create a location driver for each location   Simon Glass
• [U-Boot] [PATCH v4 12/29] env: Add a new implementation of environment access   Simon Glass
• [U-Boot] [PATCH v4 13/29] env: Switch over to use environment location drivers   Simon Glass
• [U-Boot] [PATCH v4 14/29] env: Drop common init() functions   Simon Glass
• [U-Boot] [PATCH v4 15/29] env: Drop the env_name_spec global   Simon Glass
• [U-Boot] [PATCH v4 16/29] env: Drop unused env_ptr variables   Simon Glass
• [U-Boot] [PATCH v4 17/29] env: Drop env_init_new()   Simon Glass
• [U-Boot] [PATCH v4 18/29] env: Drop env_get_char_spec()   Simon Glass
• [U-Boot] [PATCH v4 19/29] env: Drop env_relocate_spec() in favour of env_load()   Simon Glass
• [U-Boot] [PATCH v4 20/29] env: Drop saveenv() in favour of env_save()   Simon Glass
• [U-Boot] [PATCH v4 21/29] env: Rename setenv() to env_set()   Simon Glass
• [U-Boot] [PATCH v4 22/29] env: Rename common functions related to setenv()   Simon Glass
• [U-Boot] [PATCH v4 23/29] env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()   Simon Glass
• [U-Boot] [PATCH v4 24/29] env: Rename getenv/_f() to env_get()   Simon Glass
• [U-Boot] [PATCH v4 25/29] env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()   Simon Glass
• [U-Boot] [PATCH v4 26/29] env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()   Simon Glass
• [U-Boot] [PATCH v4 27/29] env: Rename some other getenv()-related functions   Simon Glass
• [U-Boot] [PATCH v4 28/29] env: Adjust the get_char() method to return an int   Simon Glass
• [U-Boot] [PATCH v4 29/29] env: Adjust the load() method to return an error   Simon Glass
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Alexander Graf
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Alexander Graf
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Add check for fallback fdt memory reservation   Alexander Graf
• [U-Boot] [PATCH 0/3] Zynq: Add support for UEFI booted Z-Turn   Alexander Graf
• [U-Boot] [PATCH 1/3] zynq: Add EFI runtime sections to linker script   Alexander Graf
• [U-Boot] [PATCH 2/3] zynq: Enable distro boot   Alexander Graf
• [U-Boot] [PATCH 3/3] zynq: Add Z-Turn board   Alexander Graf
• [U-Boot] Pull request: efi_loader: check CreateEvent() parameters   Alexander Graf
• [U-Boot] [PATCH 1/1] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: provide meaningful status code   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: disk: iterate only over valid block devices   Alexander Graf
• [U-Boot] efi_loader: add static to local functions   Alexander Graf
• [U-Boot] [U-Boot, 1/2] efi_loader: run CreateEvent() notify function based on flags   Alexander Graf
• [U-Boot] efi_loader: Add check for fallback fdt memory reservation   Alexander Graf
• [U-Boot] [U-Boot, 2/2] efi_loader: check CreateEvent() parameters   Alexander Graf
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: disk: iterate only over valid block devices   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Add efi-next git tree to MAINTAINERS file   Alexander Graf
• [U-Boot] [PATCH 1/1] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Alexander Graf
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Alexander Graf
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Alexander Graf
• [U-Boot] [PULL] efi patch queue 2017-07-04 (v2)   Alexander Graf
• [U-Boot] [PATCH v2 1/3] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Alexander Graf
• [U-Boot] [PATCH v2 2/3] efi_loader: provide meaningful status code   Alexander Graf
• [U-Boot] [PATCH v2 3/3] efi_loader: define all known status codes   Alexander Graf
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Alexander Graf
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Alexander Graf
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Alexander Graf
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Alexander Graf
• [U-Boot] [RFC] efi_loader: memory leak in bootefi   Alexander Graf
• [U-Boot] [RFC] efi_loader: memory leak in bootefi   Alexander Graf
• [U-Boot] [PATCH 1/3] efi_loader: implement multiple event support   Alexander Graf
• [U-Boot] [PATCH 2/3] efi_loader: implement WaitForKey   Alexander Graf
• [U-Boot] [PATCH 3/3] efi_loader: no debug message on wait for key   Alexander Graf
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Alexander Graf
• [U-Boot] [RFC] efi: variable support   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: provide meaningful status code   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: provide meaningful status code   Alexander Graf
• [U-Boot] [PATCH 1/3] efi_loader: implement multiple event support   Alexander Graf
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Alexander Graf
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Alexander Graf
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Alexander Graf
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Alexander Graf
• [U-Boot] [PATCH v2 2/7] efi_loader: implement multiple event support   Alexander Graf
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Alexander Graf
• [U-Boot] [PATCH] efi_loader: log EFI return values too   Alexander Graf
• [U-Boot] [PATCH] efi_loader: log EFI return values too   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] efi_loader: workaround for grub lsefi bug   Alexander Graf
• [U-Boot] [PATCH] efi_loader: add back optional efi_handler::open()   Alexander Graf
• [U-Boot] [RFC] efi: variable support   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [RFC] efi: variable support   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [PATCH 2/4] efi_loader: add udevice to EFI device-path mapping   Alexander Graf
• [U-Boot] [RFC] efi: variable support   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [RFC] efi: variable support   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Alexander Graf
• [U-Boot] [PATCH 1/2] efi_loader: Improve install_configuration_table   Alexander Graf
• [U-Boot] [PATCH 2/2] efi_loader: Fix configuration table override   Alexander Graf
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Alexander Graf
• [U-Boot] [PATCH 3/3] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] [PATCH] efi_loader: fix bug in efi_get_memory_map   Alexander Graf
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Alexander Graf
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] [PATCH 4/4] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] [U-Boot, 4/4] efi_loader: indent entry/exit prints to show nesting level   Alexander Graf
• [U-Boot] efi_loader: remove double EFI_EXIT() with efi_unsupported   Alexander Graf
• [U-Boot] [U-Boot,2/2] efi_loader: expose protocols via GUID   Alexander Graf
• [U-Boot] efi_loader: remove more double EFI_EXIT() in efi_disk.c   Alexander Graf
• [U-Boot] [U-Boot, 1/2] efi_loader: Improve install_configuration_table   Alexander Graf
• [U-Boot] [U-Boot, 2/2] efi_loader: Fix configuration table override   Alexander Graf
• [U-Boot] efi_loader: move guidcmp to header   Alexander Graf
• [U-Boot] efi_loader: fix bug in efi_get_memory_map   Alexander Graf
• [U-Boot] [U-Boot, 1/2] efi_loader: add helper macro to construct protocol objects   Alexander Graf
• [U-Boot] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Alexander Graf
• [U-Boot] efi_loader: log EFI return values too   Alexander Graf
• [U-Boot] [U-Boot, 3/4] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Alexander Graf
• [U-Boot] [U-Boot, 1/4] efi_loader: only evaluate EFI_EXIT()'s ret once   Alexander Graf
• [U-Boot] efi_loader: add some missing breaks   Alexander Graf
• [U-Boot] efi_loader: EFI file paths should be DOS style   Alexander Graf
• [U-Boot] efi_loader: workaround for grub lsefi bug   Alexander Graf
• [U-Boot] [U-Boot,2/4] efi_loader: Add an EFI_CALL() macro   Alexander Graf
• [U-Boot] [PULL] efi patch queue 2017-07-29   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Fix warning in efi_gop   Alexander Graf
• [U-Boot] [PATCH] bch: Fix build on FreeBSD host   Jonathan Gray
• [U-Boot] [PATCH][v2] ARMv8/sec_firmware : Update chosen/kaslr-seed with random number   Ruchika Gupta
• [U-Boot] Board file for Raspberry Pi, rpi.c and Setting MAC address   Duncan Hare
• [U-Boot] Arria 10 binary too large   Joe Hermaszewski
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Rob Herring
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Joe Hershberger
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Joe Hershberger
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Joe Hershberger
• [U-Boot] [PATCH] net: Fix compile failure in net.c   Joe Hershberger
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Joe Hershberger
• [U-Boot] [PATCH] mii: Add mii_resolve_flowctrl_fdx()   Joe Hershberger
• [U-Boot] [PATCH] mii: Add mii_resolve_flowctrl_fdx()   Joe Hershberger
• [U-Boot] [PATCH 05/51] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Joe Hershberger
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Joe Hershberger
• [U-Boot] [PATCH v2 44/56] net: gmac_rockchip: Add support for the RK3368 GMAC   Joe Hershberger
• [U-Boot] [PATCH 09/51] phy: Support Marvell 88X2242   Joe Hershberger
• [U-Boot] [PATCH] Use packed structures for networking   Joe Hershberger
• [U-Boot] [PATCH 2/3] net: ravb: Detect PHY correctly   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: ravb: Add OF probing support   Joe Hershberger
• [U-Boot] [PATCH 3/3] net: ravb: Add clock handling support   Joe Hershberger
• [U-Boot] [PATCH v1 1/1] net: phy: Add AFE settings to the Broadcom Cygnus phy   Joe Hershberger
• [U-Boot] [PATCH] net: tftp: silence a subscript above array bounds compile time warning   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/phy/fixed: do not overwrite addr   Joe Hershberger
• [U-Boot] [ PATCH v3] net: move Broadcom SF2 driver to Kconfig   Joe Hershberger
• [U-Boot] [PATCH] net: usb: r8152: fix "duplicate 'const' declaration specifier"   Joe Hershberger
• [U-Boot] [PATCH 1/5] net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Joe Hershberger
• [U-Boot] [PATCH 3/5] configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1   Joe Hershberger
• [U-Boot] [PATCH 4/5] net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxx   Joe Hershberger
• [U-Boot] [PATCH 5/5] net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options   Joe Hershberger
• [U-Boot] [PATCH 04/51] net: phy: marvell: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH v2 02/15] dm: mmc: Allow disabling driver model in SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/2] dm: ahci: Fix dwc_ahci   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/2] pipe3: Fix broken dependency   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/2] ahci: dm: Fix memory allocation for uclass private data   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/5] omap: Update the base address of the MMC controllers   Jean-Jacques Hiblot
• [U-Boot] [PATCH 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Jean-Jacques Hiblot
• [U-Boot] [PATCH 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Jean-Jacques Hiblot
• [U-Boot] [PATCH 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/2] power: palmas: Allow changing the voltage of LDO1   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/2] regulator: palmas: Add support for LDO1 regulator to provide 1.8V   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/2] regulator: palmas: disable bypass when the LDO is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/3] power: Add a driver to handle the PBIAS cell of the TI SOCs   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Jean-Jacques Hiblot
• [U-Boot] [PATCH 3/3] dm: syscon: scan sub-nodes of the syscon node   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Jean-Jacques Hiblot
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
• [U-Boot] [PATCH RESEND] ahci: dm: Fix memory allocation for uclass private data   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/3] power: Add a driver to handle the PBIAS cell of the TI SOCs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/3] dm: core: Add functions to get strings and the string count from a stringlist   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/3] dm: syscon: scan sub-nodes of the syscon node   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 3/5] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 4/5] drivers: phy: add generic_phy_valid() method   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/9] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/9] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()   Jean-Jacques Hiblot
• [U-Boot] [PATCH 3/9] fit: fixed bug in locate_dtb_in_fit()   Jean-Jacques Hiblot
• [U-Boot] [PATCH 4/9] fit: If no matching config is found in fit_find_config_node(), use the default one   Jean-Jacques Hiblot
• [U-Boot] [PATCH 5/9] lzo: add a function to check the validity of the header   Jean-Jacques Hiblot
• [U-Boot] [PATCH 6/9] gzip: add a function to parse the header   Jean-Jacques Hiblot
• [U-Boot] [PATCH 7/9] lib: allow building lzo and gunzip for the SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH 9/9] omap: detect board before spl_early_init()   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/1] dm: phy: add missing #ifdef CONFIG_PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] a question about the source of uboot(for armv8).   Jean-Jacques Hiblot
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2] phy: add a NO-OP phy driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/9] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/9] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/9] fit: fixed bug in locate_dtb_in_fit()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/9] fit: If no matching config is found in fit_find_config_node(), use the default one   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 5/9] lzo: add a function to check the validity of the header   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 6/9] gzip: add a function to parse the header   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 7/9] lib: allow building lzo and gunzip for the SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 9/9] omap: detect board before spl_early_init()   Jean-Jacques Hiblot
• [U-Boot] [U-Boot, 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Jean-Jacques Hiblot
• [U-Boot] [U-Boot, 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Jean-Jacques Hiblot
• [U-Boot] [PATCH 00/12] tegra: nyan-big: Support chainloading and add documentation   Thomas Hoff
• [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Thomas Hoff
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Jeroen Hofstee
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Jeroen Hofstee
• [U-Boot] [PATCH] fsl-lsch2: csu: correct the workaround A-010315   Zhiqiang Hou
• [U-Boot] [PATCH] armv8/fsl-lsch2: correct the config description of DSPI clock divider   Zhiqiang Hou
• [U-Boot] [PATCH] fsl-lsch2: csu: remove multiple calling function   Zhiqiang Hou
• [U-Boot] [PATCH] PCI: layerscape: Fix the bug assigning wrong address to LS2088A pcie cfg1 space   Zhiqiang Hou
• [U-Boot] [EXT] Re: How to update Espressobin (U-Boot) firmware?   Benjamin (Guodan) Huang
• [U-Boot] Rockchip nand boot image support in u-boot   Paweł Jarosz
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Franklin S Cooper Jr
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Franklin S Cooper Jr
• [U-Boot] [PATCH] MIPS: bootm: Fix broken boot_env_legacy codepath   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH 2/2] regulator: palmas: disable bypass when the LDO is enabled   Keerthy
• [U-Boot] Data Abort with gcc 7.1   Mark Kettenis
• [U-Boot] [PATCH] bch: Fix build on FreeBSD host   Mark Kettenis
• [U-Boot] [PATCH] efi_gop.c: Store gd->fb_base as uintptr_t   Mark Kettenis
• [U-Boot] [PATCH] usb: dwc2: Align size of invalidating dcache before starting DMA   Seung-Woo Kim
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Paul Kocialkowski
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Paul Kocialkowski
• [U-Boot] [PATCH 06/17] omap4: Drop redundant CONFIG_OMAP4430 symbol   Paul Kocialkowski
• [U-Boot] Theory of Operations   Kenny Koller
• [U-Boot] [PATCH 1/1] Add support Raspberry-Pi Ziro W   Dmitry Korunov
• [U-Boot] Data Abort with gcc 7.1   Jörg Krause
• [U-Boot] [PATCH 0/5] db410c: updates for grub + gfxterm   Mateusz Kulikowski
• [U-Boot] [PATCH v3 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus   Ashish Kumar
• [U-Boot] [PATCH v3 2/3] armv7: Consolidate registers space defination for CCI-400 bus   Ashish Kumar
• [U-Boot] [PATCH v3 3/3] whitelist: Remove "CONFIG_SYS_CCI400_ADDR" from whitelist   Ashish Kumar
• [U-Boot] [Patch v2 1/3] armv8: ls1088a: Add NXP LS1088A SoC support   Ashish Kumar
• [U-Boot] [PATCH v4 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus   Ashish Kumar
• [U-Boot] [PATCH v4 2/3] armv7: Consolidate registers space defination for CCI-400 bus   Ashish Kumar
• [U-Boot] [PATCH v4 3/3] whitelist: Remove "CONFIG_SYS_CCI400_ADDR" from whitelist   Ashish Kumar
• [U-Boot] compilation failure on Powerpc with SPL   Ashish Kumar
• [U-Boot] compilation failure on Powerpc with SPL   Ashish Kumar
• [U-Boot] compilation failure on Powerpc with SPL   Ashish Kumar
• [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Ashish Kumar
• [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Ashish Kumar
• [U-Boot] [PATCH v3] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Ashish Kumar
• [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()   Ashish Kumar
• [U-Boot] [PATCH 1/1] board: ls2080ardb: Add fsl_fdt_fixup_flash   Santan Kumar
• [U-Boot] compilation failure on Powerpc with SPL   Prabhakar Kushwaha
• [U-Boot] [PATCH v5] powerpc: Partialy restore core of mpc8xx   Christophe LEROY
• [U-Boot] [PATCH 2/7] powerpc, 8xx: Implement GLL2 ERRATA   Christophe LEROY
• [U-Boot] [PATCH v5] powerpc: Partialy restore core of mpc8xx   Christophe LEROY
• [U-Boot] [PATCH v2 01/10] powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/   Christophe LEROY
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Christophe LEROY
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Christophe LEROY
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe LEROY
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe LEROY
• [U-Boot] [PATCH v3] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe LEROY
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Christophe LEROY
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Christophe LEROY
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Christophe LEROY
• [U-Boot] [PATCH 01/14] powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()   Christophe LEROY
• [U-Boot] [PATCH 00/14] Cleanup for 8xx and other misc powerpc   Christophe LEROY
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Christophe LEROY
• [U-Boot] [U-Boot, v2, 07/14] Convert CONFIG_CMD_REGINFO to Kconfig   Christophe LEROY
• [U-Boot] [PATCH 1/1] Add support Raspberry-Pi Ziro W   Rask Ingemann Lambertsen
• [U-Boot] [PATCH 3/3] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Rask Ingemann Lambertsen
• [U-Boot] [PATCH v6] powerpc: Partialy restore core of mpc8xx   Christophe Leroy
• [U-Boot] [PATCH v2 0/10] powerpc, 8xx: Modernise the 8xx   Christophe Leroy
• [U-Boot] [PATCH v2 01/10] powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/   Christophe Leroy
• [U-Boot] [PATCH v2 02/10] powerpc, 8xx: move specific reginfo   Christophe Leroy
• [U-Boot] [PATCH v2 03/10] powerpc, 8xx: Use IO accessors to access IO memory   Christophe Leroy
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Christophe Leroy
• [U-Boot] [PATCH v2 05/10] powerpc, 8xx: Handle checkpatch errors and some of the warnings/checks   Christophe Leroy
• [U-Boot] [PATCH v2 06/10] powerpc, 8xx: Properly set CPM frequency in the device tree   Christophe Leroy
• [U-Boot] [PATCH v2 07/10] powerpc, 8xx: Migrate to Kconfig   Christophe Leroy
• [U-Boot] [PATCH v2 08/10] powerpc, 8xx: move FEC Ethernet driver in drivers/net   Christophe Leroy
• [U-Boot] [PATCH v2 09/10] powerpc, 8xx: move SPI driver to drivers/spi/   Christophe Leroy
• [U-Boot] [PATCH v2 10/10] powerpc, 8xx: move Serial driver to drivers/serial/   Christophe Leroy
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe Leroy
• [U-Boot] [PATCH v3] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe Leroy
• [U-Boot] [PATCH v2b 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Christophe Leroy
• [U-Boot] [PATCH v4] powerpc, 8xx: Add support for MCR3000 board from CSSI   Christophe Leroy
• [U-Boot] [PATCH 00/14] Cleanup for 8xx and other misc powerpc   Christophe Leroy
• [U-Boot] [PATCH 01/14] powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()   Christophe Leroy
• [U-Boot] [PATCH 02/14] powerpc: get rid of addr_probe()   Christophe Leroy
• [U-Boot] [PATCH 03/14] powerpc, timer: Does 8xx specific actions in 8xx cpu_init   Christophe Leroy
• [U-Boot] [PATCH 04/14] power, timer: reset TBL before TBU   Christophe Leroy
• [U-Boot] [PATCH 05/14] powerpc: move set_msr() and get_msr() into .h   Christophe Leroy
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Christophe Leroy
• [U-Boot] [PATCH 07/14] Convert CONFIG_CMD_REGINFO to Kconfig   Christophe Leroy
• [U-Boot] [PATCH 08/14] powerpc, 8xx: Simplifying check_CPU()   Christophe Leroy
• [U-Boot] [PATCH 09/14] powerpc, 8xx: Move cache function into C files   Christophe Leroy
• [U-Boot] [PATCH 10/14] powerpc, 8xx: move get_immr() into C   Christophe Leroy
• [U-Boot] [PATCH 11/14] powerpc, 8xx: move cache helper into C   Christophe Leroy
• [U-Boot] [PATCH 12/14] powerpc: move get_pvr() and get_svr() into C   Christophe Leroy
• [U-Boot] [PATCH 13/14] powerpc, 8xx: fix missing function declarations.   Christophe Leroy
• [U-Boot] [PATCH 14/14] powerpc: Remove 8260 remainders   Christophe Leroy
• [U-Boot] [PATCH v2 00/14] Cleanup for 8xx and other misc powerpc   Christophe Leroy
• [U-Boot] [PATCH v2 01/14] powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()   Christophe Leroy
• [U-Boot] [PATCH v2 02/14] powerpc: get rid of addr_probe()   Christophe Leroy
• [U-Boot] [PATCH v2 03/14] powerpc, timer: Does 8xx specific actions in 8xx cpu_init   Christophe Leroy
• [U-Boot] [PATCH v2 04/14] power, timer: reset TBL before TBU   Christophe Leroy
• [U-Boot] [PATCH v2 05/14] powerpc: move set_msr() and get_msr() into .h   Christophe Leroy
• [U-Boot] [PATCH v2 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Christophe Leroy
• [U-Boot] [PATCH v2 07/14] Convert CONFIG_CMD_REGINFO to Kconfig   Christophe Leroy
• [U-Boot] [PATCH v2 08/14] powerpc, 8xx: Simplifying check_CPU()   Christophe Leroy
• [U-Boot] [PATCH v2 09/14] powerpc, 8xx: Move cache function into C files   Christophe Leroy
• [U-Boot] [PATCH v2 10/14] powerpc, 8xx: move get_immr() into C   Christophe Leroy
• [U-Boot] [PATCH v2 11/14] powerpc, 8xx: move cache helper into C   Christophe Leroy
• [U-Boot] [PATCH v2 12/14] powerpc: move get_pvr() and get_svr() into C   Christophe Leroy
• [U-Boot] [PATCH v2 13/14] powerpc, 8xx: fix missing function declarations.   Christophe Leroy
• [U-Boot] [PATCH v2 14/14] powerpc: Remove 8260 remainders   Christophe Leroy
• [U-Boot] [EXT] Re: [v2] arm64: mvebu: use single defconfig for Armada8K development boards   Igal Liberman
• [U-Boot] [PATCH] topic-miamiplus: Run CPU at 800MHz for speedgrade-2   Mike Looijmans
• [U-Boot] [PATCH] stm32: Correct positioning of declaration   Vikas MANOCHA
• [U-Boot] STM32F746 Discovery - No serial output?   Vikas MANOCHA
• [U-Boot] [PATCH v2 1/1] stmf32f4: soc: fix buildman compilation error   Vikas MANOCHA
• [U-Boot] Does U-boot allow snapshot restoration?   Łukasz Majewski
• [U-Boot] Does U-boot allow snapshot restoration?   Łukasz Majewski
• [U-Boot] Adding Debug Symbol To U-Boot   Łukasz Majewski
• [U-Boot] [PATCH v2 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Łukasz Majewski
• [U-Boot] [PATCH v2 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Łukasz Majewski
• [U-Boot] [PATCH 0/4] dfu: remove limitation on partition size   Łukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu   Łukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu   Łukasz Majewski
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Łukasz Majewski
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Łukasz Majewski
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Łukasz Majewski
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Łukasz Majewski
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Łukasz Majewski
• [U-Boot] [PATCH v5 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Łukasz Majewski
• [U-Boot] [PATCH v3 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Łukasz Majewski
• [U-Boot] [PATCH] Convert CONFIG_USB_ETHER et al to Kconfig   Łukasz Majewski
• [U-Boot] [PATCH] usb: dwc2: Align size of invalidating dcache before starting DMA   Łukasz Majewski
• [U-Boot] [PATCH 1/1] serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig   Vikas Manocha
• [U-Boot] [PATCH 1/1] armv7m: mpu_config add missing break   Vikas Manocha
• [U-Boot] USB power is not enabled fro BeagleBone Black   Sergey Manucharian
• [U-Boot] USB power is not enabled fro BeagleBone Black   Sergey Manucharian
• [U-Boot] [PATCH] mkimage: check environment for dtc binary location   Hauke Mehrtens
• [U-Boot] [PATCH] mkimage: check environment for dtc binary location   Hauke Mehrtens
• [U-Boot] [PATCH 03/16] usb: Remove unnecessary work in usb_setup_descriptor()   Bin Meng
• [U-Boot] Targets with xHCI but without DM_USB   Bin Meng
• [U-Boot] Targets with xHCI but without DM_USB   Bin Meng
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v2 1/3] x86: Add dma-mapping.h to architectural code   Bin Meng
• [U-Boot] [PATCH v2 2/3] x86: Add Intel Tangier support   Bin Meng
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Bin Meng
• [U-Boot] [PATCH v1 1/3] wdt: Fix spelling Resettting -> Resetting   Bin Meng
• [U-Boot] [PATCH v1 2/3] wdt: Timeout better to be in microseconds   Bin Meng
• [U-Boot] [PATCH v1 3/3] wdt: Unify option of timeout value   Bin Meng
• [U-Boot] [PATCH 07/16] usb: hub: Translate USB 3.0 hub port status into old version   Bin Meng
• [U-Boot] [RESEND][PATCH v5 1/5] usb: host: xhci-dwc3: Convert driver to DM   Bin Meng
• [U-Boot] [RESEND][PATCH v5 1/5] usb: host: xhci-dwc3: Convert driver to DM   Bin Meng
• [U-Boot] [PATCH v2 08/10] powerpc, 8xx: move FEC Ethernet driver in drivers/net   Bin Meng
• [U-Boot] [PATCH v2 07/10] powerpc, 8xx: Migrate to Kconfig   Bin Meng
• [U-Boot] [PATCH v3 3/3] x86: Add Intel Edison board files   Bin Meng
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Bin Meng
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Bin Meng
• [U-Boot] [PATCH v3] watchdog: Introduce watchdog driver for Intel Tangier   Bin Meng
• [U-Boot] [PATCH 1/3] dm: ahci: Add a generic PCI-based AHCI driver   Bin Meng
• [U-Boot] [PATCH] Makefile: add dependencies to regenerate u-boot.cfg when lost   Bin Meng
• [U-Boot] [PATCH] dm: arm: ls1021a: Move to driver model for USB   Bin Meng
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v6 1/5] usb: host: xhci-dwc3: Convert driver to DM   Bin Meng
• [U-Boot] [PATCH v2 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Bin Meng
• [U-Boot] [PATCH v3 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Bin Meng
• [U-Boot] [PATCH v3 01/18] usb: xhci: Remove incorrect comments for struct xhci_container_ctx   Bin Meng
• [U-Boot] [PATCH v3 02/18] usb: xhci: Correct command TRB 4th dword initialization   Bin Meng
• [U-Boot] [PATCH v3 03/18] usb: xhci: Initialize scratchpad buffer array and scratchpad buffers   Bin Meng
• [U-Boot] [PATCH v3 04/18] usb: xhci: Add input slot context in xhci_set_configuration()   Bin Meng
• [U-Boot] [PATCH v3 05/18] usb: hub: Update handling connect status/change in usb_scan_port()   Bin Meng
• [U-Boot] [PATCH v3 06/18] usb: hub: Send correct wValue to get hub descriptor of a USB 3.0 hub   Bin Meng
• [U-Boot] [PATCH v3 07/18] usb: hub: Revise wLength for 'get port status' request   Bin Meng
• [U-Boot] [PATCH v3 08/18] usb: hub: Change USB hub descriptor to match USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v3 09/18] usb: hub: Add 3.0 hub port status mask of 2.0 hub   Bin Meng
• [U-Boot] [PATCH v3 10/18] usb: xhci: Change MAX_HC_PORTS to 255   Bin Meng
• [U-Boot] [PATCH v3 11/18] usb: xhci: Get rid of CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS   Bin Meng
• [U-Boot] [PATCH v3 12/18] configs: Remove CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS in all boards   Bin Meng
• [U-Boot] [PATCH v3 13/18] usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS   Bin Meng
• [U-Boot] [PATCH v3 14/18] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards   Bin Meng
• [U-Boot] [PATCH v3 15/18] usb: cmd: Print actual packet size for super speed devices   Bin Meng
• [U-Boot] [PATCH v3 16/18] usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig   Bin Meng
• [U-Boot] [PATCH v3 17/18] x86: minnowmax: Add a environment variable for USB power-on delay   Bin Meng
• [U-Boot] [PATCH v3 18/18] x86: minnowmax: Enable USB xHCI support   Bin Meng
• [U-Boot] [PATCH v2 00/15] usb: hub: Support USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v2 01/15] usb: xhci-pci: Drop non-DM version of xhci-pci driver   Bin Meng
• [U-Boot] [PATCH v2 02/15] usb: xhci-pci: Clean up the driver a little bit   Bin Meng
• [U-Boot] [PATCH v2 03/15] usb: hub: Use 'struct usb_hub_device' as hub device's uclass_priv   Bin Meng
• [U-Boot] [PATCH v2 04/15] usb: hub: Remove hub_port_reset()   Bin Meng
• [U-Boot] [PATCH v2 05/15] usb: hub: Add a new API to test if a hub device is root hub   Bin Meng
• [U-Boot] [PATCH v2 06/15] usb: hub: Translate USB 3.0 hub port status into old version   Bin Meng
• [U-Boot] [PATCH v2 07/15] usb: hub: Support 'set hub depth' request for USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v2 08/15] usb: xhci: Change xhci_setup_addressable_virt_dev() signature   Bin Meng
• [U-Boot] [PATCH v2 09/15] usb: xhci: Program 'route string' in the input slot context   Bin Meng
• [U-Boot] [PATCH v2 10/15] usb: hub: Parse and save TT details from device descriptor   Bin Meng
• [U-Boot] [PATCH v2 11/15] dm: usb: Add a new USB controller operation 'update_hub_device'   Bin Meng
• [U-Boot] [PATCH v2 12/15] usb: hub: Call usb_update_hub_device() after hub descriptor is fetched   Bin Meng
• [U-Boot] [PATCH v2 13/15] usb: xhci: Implement update_hub_device() operation   Bin Meng
• [U-Boot] [PATCH v2 14/15] usb: xhci: Correct TT_SLOT and TT_PORT macros   Bin Meng
• [U-Boot] [PATCH v2 15/15] usb: xhci: Enable TT to support LS/FS devices behind a HS hub   Bin Meng
• [U-Boot] [PATCH v2 09/15] usb: xhci: Program 'route string' in the input slot context   Bin Meng
• [U-Boot] [PATCH v3 14/18] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards   Bin Meng
• [U-Boot] [PATCH v2 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH v2 01/13] usb: xhci: Add interrupt transfer support   Bin Meng
• [U-Boot] [PATCH v2 02/13] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Bin Meng
• [U-Boot] [PATCH v2 03/13] usb: kbd: kconfig: Set a default polling mechanism for USB keyboard   Bin Meng
• [U-Boot] [PATCH v2 04/13] usb: Only get 64 bytes device descriptor for full speed devices   Bin Meng
• [U-Boot] [PATCH v2 05/13] usb: Read device descriptor after device is addressed for xHCI   Bin Meng
• [U-Boot] [PATCH v2 06/13] usb: xhci: Fix max packet size for full speed device endpoint 0   Bin Meng
• [U-Boot] [PATCH v2 07/13] usb: hub: Clear port reset before usb_hub_port_connect_change()   Bin Meng
• [U-Boot] [PATCH v2 08/13] usb: hub: Clear BH reset status change for a 3.0 hub   Bin Meng
• [U-Boot] [PATCH v2 09/13] usb: Handle audio extension endpoint descriptor in usb_parse_config()   Bin Meng
• [U-Boot] [PATCH v2 10/13] usb: xhci: Honor endpoint's interval   Bin Meng
• [U-Boot] [PATCH v2 11/13] usb: xhci: Program max burst size for endpoint   Bin Meng
• [U-Boot] [PATCH v2 12/13] usb: xhci: Set 'Error Count' to 0 for isoch endpoints   Bin Meng
• [U-Boot] [PATCH v2 13/13] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints   Bin Meng
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Bin Meng
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Bin Meng
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Bin Meng
• [U-Boot] [PATCH 01/12] x86: theadorable-x86-dfi-bt700: Add Micron SPI support and move VIDEO blob   Bin Meng
• [U-Boot] [PATCH 02/12] x86: dfi: Add option to select different config headers for baseboards   Bin Meng
• [U-Boot] [PATCH 03/12] x86: conga: Add option to select different config headers for baseboards   Bin Meng
• [U-Boot] [PATCH 04/12] x86: theadorable-x86: Add header file for common defines and env   Bin Meng
• [U-Boot] [PATCH 05/12] x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT   Bin Meng
• [U-Boot] [PATCH 06/12] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs   Bin Meng
• [U-Boot] [PATCH 07/12] x86: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updates   Bin Meng
• [U-Boot] [PATCH 08/12] x86: theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig: Misc defconfig updates   Bin Meng
• [U-Boot] [PATCH 09/12] x86: dfi-bt700: Add xHCI USB hub reset   Bin Meng
• [U-Boot] [PATCH 10/12] x86: dfi-bt700.dtsi: Enable xHCI and add GPIO for the xHCI HUB reset   Bin Meng
• [U-Boot] [PATCH 11/12] x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts   Bin Meng
• [U-Boot] [PATCH 12/12] x86: theadorable-x86-xxx_defconfig: Misc defconfig updates   Bin Meng
• [U-Boot] [PATCH 01/12] x86: theadorable-x86-dfi-bt700: Add Micron SPI support and move VIDEO blob   Bin Meng
• [U-Boot] [PATCH v2 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Bin Meng
• [U-Boot] [PATCH v3] watchdog: Introduce watchdog driver for Intel Tangier   Bin Meng
• [U-Boot] [PATCH v4 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Bin Meng
• [U-Boot] [PATCH v4 01/18] usb: xhci: Remove incorrect comments for struct xhci_container_ctx   Bin Meng
• [U-Boot] [PATCH v4 02/18] usb: xhci: Correct command TRB 4th dword initialization   Bin Meng
• [U-Boot] [PATCH v4 03/18] usb: xhci: Initialize scratchpad buffer array and scratchpad buffers   Bin Meng
• [U-Boot] [PATCH v4 04/18] usb: xhci: Add input slot context in xhci_set_configuration()   Bin Meng
• [U-Boot] [PATCH v4 05/18] usb: hub: Update handling connect status/change in usb_scan_port()   Bin Meng
• [U-Boot] [PATCH v4 06/18] usb: hub: Send correct wValue to get hub descriptor of a USB 3.0 hub   Bin Meng
• [U-Boot] [PATCH v4 07/18] usb: hub: Revise wLength for 'get port status' request   Bin Meng
• [U-Boot] [PATCH v4 08/18] usb: hub: Change USB hub descriptor to match USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v4 09/18] usb: hub: Add 3.0 hub port status mask of 2.0 hub   Bin Meng
• [U-Boot] [PATCH v4 10/18] usb: xhci: Change MAX_HC_PORTS to 255   Bin Meng
• [U-Boot] [PATCH v4 11/18] usb: xhci: Get rid of CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS   Bin Meng
• [U-Boot] [PATCH v4 12/18] configs: Remove CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS in all boards   Bin Meng
• [U-Boot] [PATCH v4 13/18] usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS   Bin Meng
• [U-Boot] [PATCH v4 14/18] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards   Bin Meng
• [U-Boot] [PATCH v4 15/18] usb: cmd: Print actual packet size for super speed devices   Bin Meng
• [U-Boot] [PATCH v4 16/18] usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig   Bin Meng
• [U-Boot] [PATCH v4 17/18] x86: minnowmax: Add a environment variable for USB power-on delay   Bin Meng
• [U-Boot] [PATCH v4 18/18] x86: minnowmax: Enable USB xHCI support   Bin Meng
• [U-Boot] [PATCH v3 00/15] usb: hub: Support USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v3 01/15] usb: xhci-pci: Drop non-DM version of xhci-pci driver   Bin Meng
• [U-Boot] [PATCH v3 02/15] usb: xhci-pci: Clean up the driver a little bit   Bin Meng
• [U-Boot] [PATCH v3 03/15] usb: hub: Use 'struct usb_hub_device' as hub device's uclass_priv   Bin Meng
• [U-Boot] [PATCH v3 04/15] usb: hub: Remove hub_port_reset()   Bin Meng
• [U-Boot] [PATCH v3 05/15] usb: hub: Add a new API to test if a hub device is root hub   Bin Meng
• [U-Boot] [PATCH v3 06/15] usb: hub: Translate USB 3.0 hub port status into old version   Bin Meng
• [U-Boot] [PATCH v3 07/15] usb: hub: Support 'set hub depth' request for USB 3.0 hubs   Bin Meng
• [U-Boot] [PATCH v3 08/15] usb: xhci: Change xhci_setup_addressable_virt_dev() signature   Bin Meng
• [U-Boot] [PATCH v3 09/15] usb: xhci: Program 'route string' in the input slot context   Bin Meng
• [U-Boot] [PATCH v3 10/15] usb: hub: Parse and save TT details from device descriptor   Bin Meng
• [U-Boot] [PATCH v3 11/15] dm: usb: Add a new USB controller operation 'update_hub_device'   Bin Meng
• [U-Boot] [PATCH v3 12/15] usb: hub: Call usb_update_hub_device() after hub descriptor is fetched   Bin Meng
• [U-Boot] [PATCH v3 13/15] usb: xhci: Implement update_hub_device() operation   Bin Meng
• [U-Boot] [PATCH v3 14/15] usb: xhci: Correct TT_SLOT and TT_PORT macros   Bin Meng
• [U-Boot] [PATCH v3 15/15] usb: xhci: Enable TT to support LS/FS devices behind a HS hub   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH v3 01/13] usb: xhci: Add interrupt transfer support   Bin Meng
• [U-Boot] [PATCH v3 02/13] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Bin Meng
• [U-Boot] [PATCH v3 03/13] usb: kbd: kconfig: Set a default polling mechanism for USB keyboard   Bin Meng
• [U-Boot] [PATCH v3 04/13] usb: Only get 64 bytes device descriptor for full speed devices   Bin Meng
• [U-Boot] [PATCH v3 05/13] usb: Read device descriptor after device is addressed for xHCI   Bin Meng
• [U-Boot] [PATCH v3 06/13] usb: xhci: Fix max packet size for full speed device endpoint 0   Bin Meng
• [U-Boot] [PATCH v3 07/13] usb: hub: Clear port reset before usb_hub_port_connect_change()   Bin Meng
• [U-Boot] [PATCH v3 08/13] usb: hub: Clear BH reset status change for a 3.0 hub   Bin Meng
• [U-Boot] [PATCH v3 09/13] usb: Handle audio extension endpoint descriptor in usb_parse_config()   Bin Meng
• [U-Boot] [PATCH v3 10/13] usb: xhci: Honor endpoint's interval   Bin Meng
• [U-Boot] [PATCH v3 11/13] usb: xhci: Program max burst size for endpoint   Bin Meng
• [U-Boot] [PATCH v3 12/13] usb: xhci: Set 'Error Count' to 0 for isoch endpoints   Bin Meng
• [U-Boot] [PATCH v3 13/13] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints   Bin Meng
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Bin Meng
• [U-Boot] [PATCH v2] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v2] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH v3] watchdog: Introduce watchdog driver for Intel Tangier   Bin Meng
• [U-Boot] [PATCH v2 1/3] x86: Add dma-mapping.h to architectural code   Bin Meng
• [U-Boot] [PATCH v3 2/3] x86: Add Intel Tangier support   Bin Meng
• [U-Boot] [PATCH v3 3/3] x86: Add Intel Edison board files   Bin Meng
• [U-Boot] [PATCH 01/11 v2] x86: theadorable-x86-dfi-bt700: Add Spansion SPI support and move VIDEO blob   Bin Meng
• [U-Boot] [PATCH 02/11 v2] x86: dfi: Add option to select different config headers for baseboards   Bin Meng
• [U-Boot] [PATCH 03/11 v2] x86: conga: Add option to select different config headers for baseboards   Bin Meng
• [U-Boot] [PATCH 05/11 v2] x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT   Bin Meng
• [U-Boot] [PATCH 09/11 v2] x86: dfi-bt700: Add xHCI USB support   Bin Meng
• [U-Boot] [PATCH 10/11 v2] x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts   Bin Meng
• [U-Boot] [PATCH v1 1/7] Makefile: Don't shadow actual error when compile ASL   Bin Meng
• [U-Boot] [PATCH v1 2/7] Makefile: Export build date as integer   Bin Meng
• [U-Boot] [PATCH v1 3/7] x86: acpi: Fill OEM revision   Bin Meng
• [U-Boot] [PATCH v1 4/7] x86: acpi: Name fields in FADT in accordance with specification   Bin Meng
• [U-Boot] [PATCH v1 5/7] x86: acpi: Deduplicate acpi_fill_madt() implementation   Bin Meng
• [U-Boot] [PATCH v1 6/7] x86: acpi: Export acpi_fill_mcfg() with __weak attribute   Bin Meng
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Bin Meng
• [U-Boot] [PATCH v2] arch/x86: Select USB before selecting host driver   Bin Meng
• [U-Boot] [PATCH] x86: minnowmax: Remove CONFIG_SMSC_LPC47M   Bin Meng
• [U-Boot] [PATCH 01/41] Convert CONFIG_CMD_MAX6957 to Kconfig   Bin Meng
• [U-Boot] [PATCH 02/41] Kconfig: Drop CONFIG_CMD_MEM   Bin Meng
• [U-Boot] [PATCH 03/41] Convert CONFIG_CMD_MFSL to Kconfig   Bin Meng
• [U-Boot] [PATCH 04/41] Convert CONFIG_CMD_MMC_SPI to Kconfig   Bin Meng
• [U-Boot] [PATCH 05/41] Convert CONFIG_CMD_MTDPARTS to Kconfig   Bin Meng
• [U-Boot] [PATCH 06/41] Convert CONFIG_CMD_MTDPARTS_SPREAD to Kconfig   Bin Meng
• [U-Boot] [PATCH 07/41] Convert CONFIG_CMD_ONENAND to Kconfig   Bin Meng
• [U-Boot] [PATCH 08/41] Convert CONFIG_CMD_PCA953X to Kconfig   Bin Meng
• [U-Boot] [PATCH 09/41] Kconfig: Drop CONFIG_CMD_PCA953X_INFO   Bin Meng
• [U-Boot] [PATCH 10/41] Convert CONFIG_CMD_PCI to Kconfig   Bin Meng
• [U-Boot] [PATCH 11/41] Kconfig: Drop CONFIG_CMD_PCI_ENUM   Bin Meng
• [U-Boot] [PATCH 12/41] Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driver   Bin Meng
• [U-Boot] [PATCH 13/41] Convert CONFIG_CMD_PCMCIA to Kconfig   Bin Meng
• [U-Boot] [PATCH 14/41] Kconfig: Drop CONFIG_CMD_PORTIO and associated command   Bin Meng
• [U-Boot] [PATCH 15/41] Kconfig: Convert CMD_READ to Kconfig   Bin Meng
• [U-Boot] [PATCH 16/41] Convert CONFIG_CMD_REGINFO to Kconfig   Bin Meng
• [U-Boot] [PATCH 17/41] Convert CONFIG_CMD_REISER to Kconfig   Bin Meng
• [U-Boot] [PATCH 18/41] Kconfig: sandbox: Drop CONFIG_CMD_SANDBOX option   Bin Meng
• [U-Boot] [PATCH 19/41] Convert CONFIG_CMD_SAVES to Kconfig   Bin Meng
• [U-Boot] [PATCH 20/41] Convert CONFIG_CMD_SCSI to Kconfig   Bin Meng
• [U-Boot] [PATCH 21/41] Convert CONFIG_CMD_SDRAM to Kconfig   Bin Meng
• [U-Boot] [PATCH 22/41] Convert CONFIG_CMD_SF_TEST to Kconfig   Bin Meng
• [U-Boot] [PATCH 23/41] Convert CONFIG_CMD_SH_ZIMAGEBOOT to Kconfig   Bin Meng
• [U-Boot] [PATCH 24/41] Convert CONFIG_CMD_SPL to Kconfig   Bin Meng
• [U-Boot] [PATCH 25/41] Convert CONFIG_CMD_SPL_NAND_OFS to Kconfig   Bin Meng
• [U-Boot] [PATCH v1 1/7] Makefile: Don't shadow actual error when compile ASL   Bin Meng
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Bin Meng
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Bin Meng
• [U-Boot] [PATCH 1/2] usb: kbd: don't fail with iomux   Bin Meng
• [U-Boot] [PATCH 2/2] usb: kbd: add missing \n   Bin Meng
• [U-Boot] [PATCH 26/41] Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig   Bin Meng
• [U-Boot] [PATCH 27/41] Convert CONFIG_CMD_STRINGS to Kconfig   Bin Meng
• [U-Boot] [PATCH 28/41] gpio: Drop sx151x driver   Bin Meng
• [U-Boot] [PATCH 29/41] Convert CONFIG_CMD_TCA642X to Kconfig   Bin Meng
• [U-Boot] [PATCH 30/41] Convert CONFIG_CMD_TERMINAL to Kconfig   Bin Meng
• [U-Boot] [PATCH 31/41] Kconfig: Drop CONFIG_CMD_TFTP   Bin Meng
• [U-Boot] [PATCH 32/41] Convert CONFIG_CMD_THOR_DOWNLOAD to Kconfig   Bin Meng
• [U-Boot] [PATCH 33/41] Convert CONFIG_CMD_YAFFS2 to Kconfig   Bin Meng
• [U-Boot] [PATCH 34/41] Convert CONFIG_CMD_TRACE to Kconfig   Bin Meng
• [U-Boot] [PATCH 35/41] Convert CONFIG_CMD_TSI148 to Kconfig   Bin Meng
• [U-Boot] [PATCH 36/41] Convert CONFIG_CMD_UNIVERSE to Kconfig   Bin Meng
• [U-Boot] [PATCH 37/41] Convert CONFIG_CMD_UUID to Kconfig   Bin Meng
• [U-Boot] [PATCH 38/41] Convert CONFIG_CMD_ZBOOT to Kconfig   Bin Meng
• [U-Boot] [PATCH 39/41] Convert CONFIG_CMD_ZFS to Kconfig   Bin Meng
• [U-Boot] [PATCH 40/41] Drop config_cmd_all.h   Bin Meng
• [U-Boot] [PATCH 41/41] README: Drop information about commands   Bin Meng
• [U-Boot] [PATCH] dm: core: Show driver name with 'dm tree'   Bin Meng
• [U-Boot] [PATCH 1/5] board_f: Drop the timer after relocation   Bin Meng
• [U-Boot] [PATCH 2/5] dm: x86: Allow TSC timer to be used before DM is ready   Bin Meng
• [U-Boot] [PATCH 4/5] bootstage: Drop unused options   Bin Meng
• [U-Boot] [PATCH 5/5] bootstage: Provide a separate record count setting for SPL   Bin Meng
• [U-Boot] [PATCH v2 12/15] dm: scsi: Don't scan the SCSI bus when probing   Bin Meng
• [U-Boot] [PATCH 1/2] x86: Use default stack boundary alignment   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH] xilinx-ppc.h: Drop   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for x86   Bin Meng
• [U-Boot] [PATCH 1/2] sf: Add Macronix MX25U6435F device parameters   Bin Meng
• [U-Boot] [PATCH 2/2] sf: Preserve QE bit when clearing BP# bits for Macronix flash   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Bin Meng
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Bin Meng
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Bin Meng
• [U-Boot] [U-Boot, v2] serial: ns16550: Add RX interrupt buffer support   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] [PATCH 1/6] x86: tsc: Read all ratio bits from MSR_PLATFORM_INFO   Bin Meng
• [U-Boot] [PATCH 2/6] x86: tsc: Identify Intel-specific code   Bin Meng
• [U-Boot] [PATCH 3/6] x86: tsc: Remove the fail handling in try_msr_calibrate_tsc()   Bin Meng
• [U-Boot] [PATCH 4/6] x86: tsc: Update comments and expand definitions in freq_desc_tables[]   Bin Meng
• [U-Boot] [PATCH 5/6] x86: tsc: Correct Silvermont reference clock values   Bin Meng
• [U-Boot] [PATCH 6/6] x86: tsc: Rename try_msr_calibrate_tsc() to cpu_mhz_from_msr()   Bin Meng
• [U-Boot] [PATCH 2/6] x86: tsc: Identify Intel-specific code   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
• [U-Boot] [PATCH v2 1/2] x86: Use default stack boundary alignment   Bin Meng
• [U-Boot] [PATCH v2 2/2] x86: Enforce toolchain to generate 64-bit codes for 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH] configs: Enable CONFIG_DM_USB for all ls1021atwr   Bin Meng
• [U-Boot] [RFC, 1/2] NVMe: add NVMe driver support   Bin Meng
• [U-Boot] [PATCH 00/22] x86: kconfig clean up   Bin Meng
• [U-Boot] [PATCH 01/22] x86: kconfig: Select TIMER and X86_TSC_TIMER   Bin Meng
• [U-Boot] [PATCH 02/22] x86: kconfig: Select USE_PRIVATE_LIBGCC   Bin Meng
• [U-Boot] [PATCH 03/22] x86: kconfig: Select PCI and DM_PCI   Bin Meng
• [U-Boot] [PATCH 04/22] x86: kconfig: Imply HAVE_INTEL_ME in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH 05/22] x86: kconfig: Let board select BOARD_EARLY_INIT_F   Bin Meng
• [U-Boot] [PATCH 06/22] x86: kconfig: Select ARCH_MISC_INIT in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH 07/22] x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH 08/22] x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH 09/22] x86: kconfig: Select OF_CONTROL   Bin Meng
• [U-Boot] [PATCH 10/22] x86: kconfig: Imply DM uclass drivers   Bin Meng
• [U-Boot] [PATCH 11/22] x86: baytrail: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 12/22] x86: ivybridge: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 13/22] x86: broadwell: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 14/22] x86: coreboot: kconfig: Imply drivers that are useful   Bin Meng
• [U-Boot] [PATCH 15/22] x86: queensbay: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 16/22] x86: tangier: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 17/22] x86: quark: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 18/22] x86: qemu: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH 19/22] x86: qemu: Remove SPI flash from defconfigs   Bin Meng
• [U-Boot] [PATCH 20/22] x86: kconfig: Let board select SPI flash   Bin Meng
• [U-Boot] [PATCH 21/22] x86: kconfig: Move USB to platform Kconfig   Bin Meng
• [U-Boot] [PATCH 22/22] x86: kconfig: Convert INTEL_ICH6_GPIO to Kconfig   Bin Meng
• [U-Boot] [PATCH v1 1/7] Makefile: Don't shadow actual error when compile ASL   Bin Meng
• [U-Boot] [PATCH v1 2/7] Makefile: Export build date as integer   Bin Meng
• [U-Boot] [PATCH v1 3/7] x86: acpi: Fill OEM revision   Bin Meng
• [U-Boot] [PATCH v1 4/7] x86: acpi: Name fields in FADT in accordance with specification   Bin Meng
• [U-Boot] [PATCH v1 5/7] x86: acpi: Deduplicate acpi_fill_madt() implementation   Bin Meng
• [U-Boot] [PATCH v1 6/7] x86: acpi: Export acpi_fill_mcfg() with __weak attribute   Bin Meng
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Bin Meng
• [U-Boot] [PATCH] x86: minnowmax: Remove CONFIG_SMSC_LPC47M   Bin Meng
• [U-Boot] [PATCH] configs: Migrate CMD_NAND*   Bin Meng
• [U-Boot] [PATCH 1/3] dm: ahci: Add a generic PCI-based AHCI driver   Bin Meng
• [U-Boot] [PATCHv2] configs: Migrate CMD_NAND*   Bin Meng
• [U-Boot] [PATCH v1] x86: Make table address selectable   Bin Meng
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH v2 00/22] x86: kconfig clean up   Bin Meng
• [U-Boot] [PATCH v2 01/22] x86: kconfig: Select TIMER and X86_TSC_TIMER   Bin Meng
• [U-Boot] [PATCH v2 02/22] x86: kconfig: Select USE_PRIVATE_LIBGCC   Bin Meng
• [U-Boot] [PATCH v2 03/22] x86: kconfig: Select PCI and DM_PCI   Bin Meng
• [U-Boot] [PATCH v2 04/22] x86: kconfig: Imply HAVE_INTEL_ME in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH v2 05/22] x86: kconfig: Let board select BOARD_EARLY_INIT_F   Bin Meng
• [U-Boot] [PATCH v2 06/22] x86: kconfig: Select ARCH_MISC_INIT in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH v2 07/22] x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH v2 08/22] x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig   Bin Meng
• [U-Boot] [PATCH v2 09/22] x86: kconfig: Select OF_CONTROL   Bin Meng
• [U-Boot] [PATCH v2 10/22] x86: kconfig: Imply DM uclass drivers   Bin Meng
• [U-Boot] [PATCH v2 11/22] x86: baytrail: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 12/22] x86: ivybridge: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 13/22] x86: broadwell: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 14/22] x86: coreboot: kconfig: Imply drivers that are useful   Bin Meng
• [U-Boot] [PATCH v2 15/22] x86: queensbay: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 16/22] x86: tangier: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 17/22] x86: quark: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 18/22] x86: qemu: kconfig: Imply platform specific drivers   Bin Meng
• [U-Boot] [PATCH v2 19/22] x86: qemu: Remove SPI flash from defconfigs   Bin Meng
• [U-Boot] [PATCH v2 20/22] x86: kconfig: Let board select SPI flash   Bin Meng
• [U-Boot] [PATCH v2 21/22] x86: kconfig: Move USB to platform Kconfig   Bin Meng
• [U-Boot] [PATCH v2 22/22] x86: Convert INTEL_ICH6_GPIO to Kconfig   Bin Meng
• [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused uma_memory_size   Bin Meng
• [U-Boot] [PATCH 3/3] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Bin Meng
• [U-Boot] [PATCH 3/3] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Bin Meng
• [U-Boot] [PATCH v2 0/4] x86: Convert all boards to DM MMC and SCSI   Bin Meng
• [U-Boot] [PATCH v2 1/4] dm: scsi: Add a generic PCI-based AHCI driver   Bin Meng
• [U-Boot] [PATCH v2 2/4] block: ide: Fix build error when CONFIG_BLK is on   Bin Meng
• [U-Boot] [PATCH v2 3/4] x86: Convert MMC to driver model   Bin Meng
• [U-Boot] [PATCH v2 4/4] x86: Switch all boards to use DM SCSI   Bin Meng
• [U-Boot] [PATCH 1/2] sf: Add Macronix MX25U6435F device parameters   Bin Meng
• [U-Boot] [PATCH 1/2] sf: Add Macronix MX25U6435F device parameters   Bin Meng
• [U-Boot] i.MX6DL USB OTG Gadget ether with DM_USB and DM_ETH?   Bernhard Messerklinger
• [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR   Eric Nelson
• [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR   Eric Nelson
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Robert Nelson
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Robert Nelson
• [U-Boot] [RFC, 1/2] NVMe: add NVMe driver support   Jon Nettleton
• [U-Boot] [RFC, 1/2] NVMe: add NVMe driver support   Jon Nettleton
• [U-Boot] u-boot for loading RTOS instead of Linux   BOULAMAIL Nihad
• [U-Boot] [PATCH v2] mmc: pic32_sdhci: Complete the transition to driver model   Alan Ott
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] arch: armv8: Remove the error when dcache is off   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v1 1/1] net: phy: Add AFE settings to the Broadcom Cygnus phy   Arun Parameswaran
• [U-Boot] saveenv command on odroid c2   Tyna Pelletier-Bilodeau
• [U-Boot] [BUG] checkpatch: false positive storage class location   Joe Perches
• [U-Boot] [BUG] checkpatch: false positive storage class location   Joe Perches
• [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Alexandre N. Perfeito
• [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Alexandre N. Perfeito
• [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Alexandre N. Perfeito
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Romain Perier
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Romain Perier
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Romain Perier
• [U-Boot] [PATCH 0/2] rockchip: rk3288: Fixes for GMAC   Romain Perier
• [U-Boot] [PATCH 1/2] rockchip: rk3288: Remove phy reset GPIO pull up   Romain Perier
• [U-Boot] [PATCH 2/2] rockchip: rk3288: Revert MAC_TXCLK in pinctrl for GMAC   Romain Perier
• [U-Boot] [PATCH] rockchip: rk3288: Add support for drive-strength in PINCTRL   Romain Perier
• [U-Boot] Data Abort with gcc 7.1   Thomas Petazzoni
• [U-Boot] [PATCH] arch/sh: allow building in big-endian mode   Thomas Petazzoni
• [U-Boot] [PATCH 0/3] env_embedded related fixes/improvements   Thomas Petazzoni
• [U-Boot] [PATCH 1/3] arch/sh: don't bring common/env_embedded.o into the link   Thomas Petazzoni
• [U-Boot] [PATCH 2/3] common/env_embedded.c: drop support for CONFIG_SYS_USE_PPCENV   Thomas Petazzoni
• [U-Boot] [PATCH 3/3] common/env_embedded.c: rename PPCENV/PPCTEXT macros   Thomas Petazzoni
• [U-Boot] [EXT] How to update Espressobin (U-Boot) firmware?   Kostya Porotchkin
• [U-Boot] [EXT] How to update Espressobin (U-Boot) firmware?   Kostya Porotchkin
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Kostya Porotchkin
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Kostya Porotchkin
• [U-Boot] am335x uboot TFTP via SPL over usb is failing   Ravi Kumar Prasad
• [U-Boot] am335x uboot TFTP via SPL over usb is failing   Ravi Kumar Prasad
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Vincent Prince
• [U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored   Vincent Prince
• [U-Boot] Booting Wandboard through USB   Vincent Prince
• [U-Boot] [PATCH 1/1] common: Move CONFIG_BOOTARGS to Kconfig   Sam Protsenko
• [U-Boot] [PATCH 1/1] common: Move CONFIG_BOOTARGS to Kconfig   Sam Protsenko
• [U-Boot] [PATCH v2 1/1] common: Move CONFIG_BOOTARGS to Kconfig   Sam Protsenko
• [U-Boot] [PATCH] sunxi: Fix CONFIG_SUNXI_GMAC references   Dave Prue
• [U-Boot] [PATCH 0/6] sunxi: update sun8i-emac driver DT binding   Andre Przywara
• [U-Boot] [PATCH 1/6] sunxi: A64: dts: replace EMAC .dtsi with symlink   Andre Przywara
• [U-Boot] [PATCH 2/6] sunxi: A64: dts: add Ethernet support for BPi-M64 and OPi-Win   Andre Przywara
• [U-Boot] [PATCH 3/6] libfdt: add fdtdec_lookup_phandle_index()   Andre Przywara
• [U-Boot] [PATCH 4/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Andre Przywara
• [U-Boot] [PATCH 5/6] net: sun8i-emac: use new, generic GPIO setup routine   Andre Przywara
• [U-Boot] [PATCH 6/6] net: sun8i-emac: add support for new DT binding   Andre Przywara
• [U-Boot] [PATCH] sunxi: add MACPWR in Orange Pi PC2 defconfig   Andre Przywara
• [U-Boot] [PATCH] sunxi: add MACPWR in Orange Pi PC2 defconfig   Andre Przywara
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Andre Przywara
• [U-Boot] [linux-sunxi] [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Andre Przywara
• [U-Boot] [linux-sunxi] [PATCH 4/4] sunxi: enable EMAC for Banana Pi M3 board   Andre Przywara
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Andre Przywara
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Andre Przywara
• [U-Boot] [PATCH 1/6] sunxi: A64: dts: replace EMAC .dtsi with symlink   Andre Przywara
• [U-Boot] [PATCH 4/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Andre Przywara
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Andre Przywara
• [U-Boot] [EXT] How to update Espressobin (U-Boot) firmware?   Andre Przywara
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Andre Przywara
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Andre Przywara
• [U-Boot] How to update Espressobin (U-Boot) firmware?   Andre Przywara
• [U-Boot] [PATCH] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Andre Przywara
• [U-Boot] [PATCH v2 0/6] sunxi: update sun8i-emac driver and A64 DTs   Andre Przywara
• [U-Boot] [PATCH v2 1/6] sunxi: gpio: add missing compatible strings   Andre Przywara
• [U-Boot] [PATCH v2 2/6] libfdt: add fdtdec_lookup_phandle_index()   Andre Przywara
• [U-Boot] [PATCH v2 3/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Andre Przywara
• [U-Boot] [PATCH v2 4/6] net: sun8i-emac: use new, generic GPIO setup routine   Andre Przywara
• [U-Boot] [PATCH v2 5/6] net: sun8i-emac: add support for new DT binding   Andre Przywara
• [U-Boot] [PATCH v2 6/6] sunxi: A64: update Linux DTs   Andre Przywara
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   André Przywara
• [U-Boot] [PATCH v2] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   André Przywara
• [U-Boot] [PATCH 3/6] libfdt: add fdtdec_lookup_phandle_index()   André Przywara
• [U-Boot] How to update Espressobin (U-Boot) firmware?   André Przywara
• [U-Boot] [PATCH] Use packed structures for networking   Denis Pynkin
• [U-Boot] [PATCH] Use packed structures for networking   Denis Pynkin
• [U-Boot] [PATCH] Use packed structures for networking   Denis Pynkin
• [U-Boot] Targets with xHCI but without DM_USB   Vignesh R
• [U-Boot] [PATCH 1/3] am43xx: Remove ethboot / usbhost_boot variants   Vignesh R
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Miquel RAYNAL
• [U-Boot] Ethernet not functional on i.MX6DL Sabre Auto   Miquel RAYNAL
• [U-Boot] [ PATCH v3] net: move Broadcom SF2 driver to Kconfig   Steve Rae
• [U-Boot] SAMA5D3 external clock source on XIN and XIN32   Stuart Ralston
• [U-Boot] [PATCHv6 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards   Jorge Ramirez
• [U-Boot] [PATCHv6 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards   Jorge Ramirez
• [U-Boot] Arria 10 binary too large   Phil Reid
• [U-Boot] [PATCH v4 00/17] nand: remove direct acces to nand_info array   Tom Rini
• [U-Boot] [PATCH v4 00/17] nand: remove direct acces to nand_info array   Tom Rini
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Tom Rini
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Tom Rini
• [U-Boot] [U-Boot, 4/4] powerpc, 8xx: Add support for MCR3000 board from CSSI   Tom Rini
• [U-Boot] [U-Boot,1/2] drivers, block: remove sil680 driver   Tom Rini
• [U-Boot] [U-Boot,2/2] powerpc: remove 4xx support   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.07-rc3 released   Tom Rini
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Tom Rini
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Tom Rini
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Tom Rini
• [U-Boot] [PATCHv6 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards   Tom Rini
• [U-Boot] [PATCH 1/3] arm: omap: Detect boot mode very early   Tom Rini
• [U-Boot] [PATCH 2/3] arm: omap4+: Enable spl_early_init()   Tom Rini
• [U-Boot] [PATCH 3/3] ARM: dts: OMAP5+: Enable gpio in SPL   Tom Rini
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Tom Rini
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Tom Rini
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Tom Rini
• [U-Boot] [PATCH] video: add config option to skip framebuffer clear   Tom Rini
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Tom Rini
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Tom Rini
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   Tom Rini
• [U-Boot] [PATCH] sandbox: Update defconfig for more build coverage   Tom Rini
• [U-Boot] [PATCH] sandbox: Enable more drivers for more build coverage   Tom Rini
• [U-Boot] [PULL] efi patch queue 2017-07-04 (v2)   Tom Rini
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Tom Rini
• [U-Boot] [PATCH 2/2] arm: config: enforce -fno-pic for SPL and normal U-Boot   Tom Rini
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Tom Rini
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Tom Rini
• [U-Boot] [PATCH v2 08/10] powerpc, 8xx: move FEC Ethernet driver in drivers/net   Tom Rini
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Tom Rini
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Tom Rini
• [U-Boot] [U-Boot,3/3] odroid-c2: enable GPIO   Tom Rini
• [U-Boot] serial: make serial_stub_* to static functions   Tom Rini
• [U-Boot] gpio: add static to get_function()   Tom Rini
• [U-Boot] odroid-c2: Populate serial# environment variable from efuse   Tom Rini
• [U-Boot] spl: Make UBI fastmap support Kconfig selectable   Tom Rini
• [U-Boot] igep00x0: Enable UBI fastmap   Tom Rini
• [U-Boot] igep003x: Falcon mode   Tom Rini
• [U-Boot] arm64: use psci reset on snapdragon   Tom Rini
• [U-Boot] [U-Boot, 1/4] Raspberry Pi: add device tree overlay support   Tom Rini
• [U-Boot] [U-Boot, 2/4] am335x: beagle/evm: add device tree overlay support   Tom Rini
• [U-Boot] [U-Boot, 3/4] 96boards: dragonboard/hikey: add device tree overlay support   Tom Rini
• [U-Boot] [U-Boot,4/4] CHIP: add device tree overlay support   Tom Rini
• [U-Boot] [U-Boot,v2] mkimage: fix display of image types list   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] configs: Odroid C2: enable device tree overlays   Tom Rini
• [U-Boot] km/common: remove unused code   Tom Rini
• [U-Boot] stm32: Correct positioning of declaration   Tom Rini
• [U-Boot] [U-Boot,v3] avr32: Retire AVR32 for good   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] wdt: Fix spelling Resettting -> Resetting   Tom Rini
• [U-Boot] [U-Boot,v1,3/3] wdt: Unify option of timeout value   Tom Rini
• [U-Boot] [U-Boot,v2] board/BuR/brppt1: fix MMC boot   Tom Rini
• [U-Boot] am335x: sl50: Enable CONFIG_AUTOBOOT_KEYED   Tom Rini
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Tom Rini
• [U-Boot] [RFC PATCH 1/2] board: laird: add WB45N CPU module   Tom Rini
• [U-Boot] [RFC PATCH 2/2] board: laird: add WB50N CPU module   Tom Rini
• [U-Boot] [PATCH 1/2] pipe3: Fix broken dependency   Tom Rini
• [U-Boot] USB power is not enabled fro BeagleBone Black   Tom Rini
• [U-Boot] [PATCH 1/5] board/db410c: use fdt passed from lk   Tom Rini
• [U-Boot] [PATCH] ARM: ti816x: Fix enabling GPIO0, enable GPIO1 as well   Tom Rini
• [U-Boot] [PATCH 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Tom Rini
• [U-Boot] USB power is not enabled fro BeagleBone Black   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Tom Rini
• [U-Boot] [U-Boot,v6] powerpc: Partialy restore core of mpc8xx   Tom Rini
• [U-Boot] [U-Boot, v2, 01/10] powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/   Tom Rini
• [U-Boot] [U-Boot,v2,02/10] powerpc, 8xx: move specific reginfo   Tom Rini
• [U-Boot] [U-Boot, v2, 03/10] powerpc, 8xx: Use IO accessors to access IO memory   Tom Rini
• [U-Boot] [U-Boot, v2b, 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Tom Rini
• [U-Boot] [U-Boot, v2, 05/10] powerpc, 8xx: Handle checkpatch errors and some of the warnings/checks   Tom Rini
• [U-Boot] [U-Boot, v2, 06/10] powerpc, 8xx: Properly set CPM frequency in the device tree   Tom Rini
• [U-Boot] [U-Boot,v2,07/10] powerpc, 8xx: Migrate to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 08/10] powerpc, 8xx: move FEC Ethernet driver in drivers/net   Tom Rini
• [U-Boot] [U-Boot, v2, 09/10] powerpc, 8xx: move SPI driver to drivers/spi/   Tom Rini
• [U-Boot] [U-Boot, v2, 10/10] powerpc, 8xx: move Serial driver to drivers/serial/   Tom Rini
• [U-Boot] [U-Boot, v4] powerpc, 8xx: Add support for MCR3000 board from CSSI   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS: drop bcm283x/rpi maintainership   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Tom Rini
• [U-Boot] u-boot for loading RTOS instead of Linux   Tom Rini
• [U-Boot] libfdt: Drop -FDT_ERR_TOODEEP   Tom Rini
• [U-Boot] cmd, nand: fix broken output of "nand info"   Tom Rini
• [U-Boot] km/common: remove unused function declarations   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.07 is released   Tom Rini
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Tom Rini
• [U-Boot] [ PATCH v3] net: move Broadcom SF2 driver to Kconfig   Tom Rini
• [U-Boot] ARM: dts: keystone-k2e-evm: Add U-boot specific dtsi file   Tom Rini
• [U-Boot] [U-Boot, v4, 01/30] ti: common: board_detect: Allow settings board detection variables manually   Tom Rini
• [U-Boot] [U-Boot, v4, 02/30] spl: fit: Break out some functions into a common file   Tom Rini
• [U-Boot] [U-Boot, v4, 03/30] boot_fit: Create helper functions that can be used to select DTB out of FIT   Tom Rini
• [U-Boot] [U-Boot, v4, 04/30] fdt: Enable selecting correct DTB from appended FIT Image   Tom Rini
• [U-Boot] [U-Boot, v4, 05/30] ti: common: board_detect: Add function to determine if EEPROM was read   Tom Rini
• [U-Boot] [U-Boot, v4, 06/30] dts: Allow OF_LIST to depend on FIT_EMBED   Tom Rini
• [U-Boot] [U-Boot, v4, 07/30] ARM: dts: k2g: Introduce U-boot specific dtsi file   Tom Rini
• [U-Boot] [U-Boot, v4, 08/30] arm: dts: Add new "generic" 66AK2Gx device tree file.   Tom Rini
• [U-Boot] [U-Boot, v4, 09/30] board_f: Add new function to allow runtime DTB selection   Tom Rini
• [U-Boot] [U-Boot, v4, 10/30] Makefile: Build additional binaries for dtb FIT blobs appended to U-boot   Tom Rini
• [U-Boot] [U-Boot, v4, 11/30] ARM: keystone2: Allow to build with all image formats   Tom Rini
• [U-Boot] [U-Boot, v4, 12/30] ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot   Tom Rini
• [U-Boot] [U-Boot, v4, 13/30] ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards   Tom Rini
• [U-Boot] [U-Boot, v4, 14/30] ks2_evm: Add EEPROM based board detection   Tom Rini
• [U-Boot] [U-Boot, v4, 15/30] defconfig: keystone2: Enable U-boot runtime DTB detection   Tom Rini
• [U-Boot] [U-Boot, v4, 16/30] ARM: keystone2: Add additional fields used for DDR3 configuration   Tom Rini
• [U-Boot] [U-Boot, v4, 17/30] ARM: k2g: Program DDR PHY MR2 register with the default value   Tom Rini
• [U-Boot] [U-Boot, v4, 18/30] ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables   Tom Rini
• [U-Boot] [U-Boot, v4, 19/30] ks2_evm: Add EEPROM based board detection helper functions   Tom Rini
• [U-Boot] [U-Boot, v4, 20/30] ARM: k2g: Add pinmux support for K2G ICE evm   Tom Rini
• [U-Boot] [U-Boot, v4, 21/30] ARM: k2g: Add DDR3 configuration for K2G ICE evm   Tom Rini
• [U-Boot] [U-Boot, v4, 22/30] board: ks2: Use board detection to wrap code not specific to K2G ICE evm   Tom Rini
• [U-Boot] [U-Boot, v4, 23/30] ARM: k2g: Use board detection to wrap K2G GP specific calls   Tom Rini
• [U-Boot] [U-Boot, v4, 24/30] ARM: k2g: Update board_name u-boot env variable at runtime   Tom Rini
• [U-Boot] [U-Boot, v4, 25/30] ARM: dts: keystone-k2g: Remove skeleton.dtsi   Tom Rini
• [U-Boot] [U-Boot, v4, 26/30] ARM: dts: keystone-k2g-evm: Add unit address to memory node   Tom Rini
• [U-Boot] [U-Boot, v4, 27/30] ARM: dts: k2g: Disable netcp by default   Tom Rini
• [U-Boot] [U-Boot, v4, 28/30] ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm   Tom Rini
• [U-Boot] [U-Boot, v4, 29/30] ARM: k2g: Add K2G ICE DTB to the list of possible DTBs   Tom Rini
• [U-Boot] [U-Boot, v4, 30/30] defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LIST   Tom Rini
• [U-Boot] [U-Boot, 1/2] pinctrl: stm32: handle a configuration list   Tom Rini
• [U-Boot] [U-Boot,2/2] pinctrl: stm32: add set_state ops   Tom Rini
• [U-Boot] [U-Boot, PATCHv6, 1/3] ARM64: dts: hi3798cv200-poplar: add device tree bindings   Tom Rini
• [U-Boot] [U-Boot,PATCHv6,2/3] driver: mmc: update debug info   Tom Rini
• [U-Boot] [U-Boot, PATCHv6, 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards   Tom Rini
• [U-Boot] [U-Boot,1/3] arm: omap: Detect boot mode very early   Tom Rini
• [U-Boot] [U-Boot,2/3] arm: omap4+: Enable spl_early_init()   Tom Rini
• [U-Boot] [U-Boot,3/3] ARM: dts: OMAP5+: Enable gpio in SPL   Tom Rini
• [U-Boot] arm: mach-keystone: Modify secure image size before copy   Tom Rini
• [U-Boot] [U-Boot, 1/1] mtd: stm32: use parameter instead of default value   Tom Rini
• [U-Boot] [U-Boot,1/2] pipe3: Fix broken dependency   Tom Rini
• [U-Boot] Data Abort with gcc 7.1   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip/master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [U-Boot, v2, 1/6] configs: am335x_evm: Enable FASTBOOT based on kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 2/6] am33xx: board: Refactor USB initialization into separate function   Tom Rini
• [U-Boot] [U-Boot, v4, 01/18] cmd: nand: abstract global variable usage for dm conversion   Tom Rini
• [U-Boot] [U-Boot, v4, 02/18] common: env_nand: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 03/18] dfu: dfu_nand: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 04/18] cmd: bootm: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 05/18] cmd: jffs2: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot,v4,06/18] common: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot,v4,07/18] fs: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 08/18] cmd: nand: remove direct access to struct mtd_info->priv   Tom Rini
• [U-Boot] [U-Boot, v4, 09/18] net: phy: cortina: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 10/18] net: fm: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 11/18] mtd: nand: drv: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 12/18] cmd: mvebu: bubt: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 13/18] board: atmel: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 14/18] board: ronetix: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 15/18] board: BuR: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 16/18] board: toradex: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 17/18] armv8: fsl-layerscape: use get_nand_dev_by_index()   Tom Rini
• [U-Boot] [U-Boot, v4, 18/18] mtd: nand: make nand_info array static   Tom Rini
• [U-Boot] ti816x: Enable ethernet support   Tom Rini
• [U-Boot] ARM: ti816x: Fix enabling GPIO0, enable GPIO1 as well   Tom Rini
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Data Abort with gcc 7.1   Tom Rini
• [U-Boot] [PATCH 0/5] mmc: omap_hsmmc: Add support for ADMA   Tom Rini
• [U-Boot] [PATCH 1/2] regulator: palmas: Add support for LDO1 regulator to provide 1.8V   Tom Rini
• [U-Boot] [PATCH 2/2] regulator: palmas: disable bypass when the LDO is enabled   Tom Rini
• [U-Boot] [PATCH 1/3] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Tom Rini
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Tom Rini
• [U-Boot] Data Abort with gcc 7.1   Tom Rini
• [U-Boot] Data Abort with gcc 7.1   Tom Rini
• [U-Boot] [PATCH 1/5] ubi: Kconfig: Fix MTD_UBI selection dependency   Tom Rini
• [U-Boot] [PATCH 2/5] cmd: Kconfig: Fix a dependency of CMD_MTDPARTS   Tom Rini
• [U-Boot] [PATCH 3/5] ubi: Kconfig: Make MTD_UBI select MTD_PARTITIONS   Tom Rini
• [U-Boot] [PATCH 4/5] cmd: Kconfig: Make CMD_UBI select CMD_MTDPARTS   Tom Rini
• [U-Boot] [PATCH 5/5] cmd: Kconfig: Fix CMD_UBIFS dependencies   Tom Rini
• [U-Boot] [PATCH 1/2] [rfc] parse the second area of android image   Tom Rini
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Tom Rini
• [U-Boot] [PATCH 00/14] Cleanup for 8xx and other misc powerpc   Tom Rini
• [U-Boot] [PATCH 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Tom Rini
• [U-Boot] Pull request: u-boot-mips   Tom Rini
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Tom Rini
• [U-Boot] Pull request: u-boot-mips   Tom Rini
• [U-Boot] Pull request: u-boot-mips   Tom Rini
• [U-Boot] [PATCH 00/30] env: Move environment code to use location drivers   Tom Rini
• [U-Boot] Pull request: u-boot-mips   Tom Rini
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Tom Rini
• [U-Boot] [PATCH v2 1/9] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Tom Rini
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Tom Rini
• [U-Boot] [PATCH] configs: ti: armv7: Fixes bug in fit_loadaddr for ramfs boot   Tom Rini
• [U-Boot] [PATCH 2/2] RFC: moveconfig: Use toolchains from buildman   Tom Rini
• [U-Boot] [PATCH 05/30] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Tom Rini
• [U-Boot] [PATCH 1/2] board: ti: am57xx: Fix detection of board version   Tom Rini
• [U-Boot] [PATCH 2/2] board: ti: x15: Add support for beagle_X15 revC   Tom Rini
• [U-Boot] [PATCH 0/4] Add default secure boot env for K2x   Tom Rini
• [U-Boot] [PATCH 1/4] configs: k2x_evm: Adds FIT loading environment variables   Tom Rini
• [U-Boot] [PATCH 2/4] configs: k2x_evm: Adds environment variables for secure devices   Tom Rini
• [U-Boot] [PATCH 3/4] configs: k2x_evm: Reorder default boot command   Tom Rini
• [U-Boot] [PATCH 4/4] arm: mach-keystone: Updates mon_install for K2G HS   Tom Rini
• [U-Boot] [PATCH] arm: mach-keystone: Fixes issue with return values in inline assembly   Tom Rini
• [U-Boot] [PATCH] configs: ti: armv7: Fixes bug in fit_loadaddr for ramfs boot   Tom Rini
• [U-Boot] [PATCH] FIT: List kernel_noload in the list of types   Tom Rini
• [U-Boot] [PATCH 1/1] common: Move CONFIG_BOOTARGS to Kconfig   Tom Rini
• [U-Boot] [PATCH] HACK: DO NOT MERGE: Simple program to printout preprocessed values   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] ARM: Mark AE boards orphan   Tom Rini
• [U-Boot] U-Boot Tool: fw_setenv - kernel option?   Tom Rini
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Tom Rini
• [U-Boot] Pull request: u-boot-mips   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Tom Rini
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Tom Rini
• [U-Boot] [PATCH] Use packed structures for networking   Tom Rini
• [U-Boot] [PATCH 1/5] Makefile: also build fdt for snapdragon   Tom Rini
• [U-Boot] [PATCH 5/5] db410c: config updates   Tom Rini
• [U-Boot] [PATCH 16/41] Convert CONFIG_CMD_REGINFO to Kconfig   Tom Rini
• [U-Boot] [PATCH] xilinx-ppc.h: Drop   Tom Rini
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Tom Rini
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Tom Rini
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Tom Rini
• [U-Boot] [PATCH 1/9] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig   Tom Rini
• [U-Boot] [PATCH 2/9] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()   Tom Rini
• [U-Boot] [PATCH 3/9] fit: fixed bug in locate_dtb_in_fit()   Tom Rini
• [U-Boot] [PATCH 4/9] fit: If no matching config is found in fit_find_config_node(), use the default one   Tom Rini
• [U-Boot] [PATCH 5/9] lzo: add a function to check the validity of the header   Tom Rini
• [U-Boot] [PATCH 6/9] gzip: add a function to parse the header   Tom Rini
• [U-Boot] [PATCH 7/9] lib: allow building lzo and gunzip for the SPL   Tom Rini
• [U-Boot] [PATCH 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Tom Rini
• [U-Boot] [PATCH 9/9] omap: detect board before spl_early_init()   Tom Rini
• [U-Boot] [PATCH 1/5] Makefile: also build fdt for snapdragon   Tom Rini
• [U-Boot] [PATCH 5/5] db410c: config updates   Tom Rini
• [U-Boot] [PATCH] configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS   Tom Rini
• [U-Boot] tools/fw_env: use fsync to ensure that data is physically stored   Tom Rini
• [U-Boot] tests: test_dfu.py: Add example udev rule for host_usb_dev_node   Tom Rini
• [U-Boot] [U-Boot, 1/3] env: Add generic redundant environment implementation   Tom Rini
• [U-Boot] [U-Boot, 2/3] env: Switch env_nand, env_mmc and env_ubi to env_import_redund   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] meson-gx: reserved memory regions   Tom Rini
• [U-Boot] dtc: mkimage: Add the possibility to specify DTC   Tom Rini
• [U-Boot] Makefile: add dependencies to regenerate u-boot.cfg when lost   Tom Rini
• [U-Boot] [U-Boot, v2, 1/6] arm: mach-omap2: Move omap5/sec-fxns.c into sec-common.c   Tom Rini
• [U-Boot] [U-Boot, v2, 2/6] arm: mach-omap2: Factor out common FDT fixup suport   Tom Rini
• [U-Boot] [U-Boot, v2, 3/6] arm: mach-omap2: fdt-common: Add OP-TEE node when firmware node is defined   Tom Rini
• [U-Boot] [U-Boot, v2, 4/6] arm: mach-omap2: am33xx: Add FDT fixup suport for AM33xx/AM43xx boards   Tom Rini
• [U-Boot] [U-Boot, v2, 5/6] board: ti: am43xx: Add TEE loading and firewall setup   Tom Rini
• [U-Boot] [U-Boot, v2, 6/6] board: ti: am43xx: Add FDT fixup for HS devices   Tom Rini
• [U-Boot] [U-Boot,1/2] moveconfig: Tidy up imply flag parsing   Tom Rini
• [U-Boot] [U-Boot, 2/2] RFC: moveconfig: Use toolchains from buildman   Tom Rini
• [U-Boot] [U-Boot, 1/2] km/ivm: always set ethaddr after reading IVM   Tom Rini
• [U-Boot] [U-Boot, 2/2] km/ivm: allow to set locally administred MAC addresses   Tom Rini
• [U-Boot] [U-Boot, v2, 01/14] powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()   Tom Rini
• [U-Boot] [U-Boot,v2,02/14] powerpc: get rid of addr_probe()   Tom Rini
• [U-Boot] [U-Boot, v2, 03/14] powerpc, timer: Does 8xx specific actions in 8xx cpu_init   Tom Rini
• [U-Boot] [U-Boot,v2,04/14] power, timer: reset TBL before TBU   Tom Rini
• [U-Boot] [U-Boot, v2, 05/14] powerpc: move set_msr() and get_msr() into .h   Tom Rini
• [U-Boot] [U-Boot, v2, 06/14] powerpc: Remove unneccessary #ifdefs in reginfo   Tom Rini
• [U-Boot] [U-Boot, v2, 07/14] Convert CONFIG_CMD_REGINFO to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 08/14] powerpc, 8xx: Simplifying check_CPU()   Tom Rini
• [U-Boot] [U-Boot, v2, 09/14] powerpc, 8xx: Move cache function into C files   Tom Rini
• [U-Boot] [U-Boot, v2, 10/14] powerpc, 8xx: move get_immr() into C   Tom Rini
• [U-Boot] [U-Boot, v2, 11/14] powerpc, 8xx: move cache helper into C   Tom Rini
• [U-Boot] [U-Boot, v2, 12/14] powerpc: move get_pvr() and get_svr() into C   Tom Rini
• [U-Boot] [U-Boot, v2, 13/14] powerpc, 8xx: fix missing function declarations.   Tom Rini
• [U-Boot] [U-Boot,v2,14/14] powerpc: Remove 8260 remainders   Tom Rini
• [U-Boot] arm: omap3: Detect boot mode very early   Tom Rini
• [U-Boot] [U-Boot, v2] serial: ns16550: Add RX interrupt buffer support   Tom Rini
• [U-Boot] [U-Boot, 1/5] ubi: Kconfig: Fix MTD_UBI selection dependency   Tom Rini
• [U-Boot] [U-Boot, 2/5] cmd: Kconfig: Fix a dependency of CMD_MTDPARTS   Tom Rini
• [U-Boot] [U-Boot, 3/5] ubi: Kconfig: Make MTD_UBI select MTD_PARTITIONS   Tom Rini
• [U-Boot] [U-Boot, 4/5] cmd: Kconfig: Make CMD_UBI select CMD_MTDPARTS   Tom Rini
• [U-Boot] [U-Boot,5/5] cmd: Kconfig: Fix CMD_UBIFS dependencies   Tom Rini
• [U-Boot] [U-Boot,v2,4/4] pinctrl: meson: convert to livetree   Tom Rini
• [U-Boot] [PATCH] configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS   Tom Rini
• [U-Boot] [U-Boot, v2] serial: ns16550: Add RX interrupt buffer support   Tom Rini
• [U-Boot] armv5 and OMAP3 Question   Tom Rini
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Tom Rini
• [U-Boot] [PATCH v2 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Tom Rini
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Tom Rini
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Tom Rini
• [U-Boot] [PATCH v2 04/34] Convert CONFIG_ENV_IS_IN_MMC et al to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 05/34] env: Move help from README to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 06/34] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 07/34] Convert CONFIG_ENV_IS_IN_NVRAM to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 08/34] Convert CONFIG_ENV_IS_IN_EEPROM to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 09/34] Convert CONFIG_ENV_IS_IN_DATAFLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 10/34] Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 11/34] Convert CONFIG_ENV_IS_IN_REMOTE to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 12/34] Convert CONFIG_ENV_IS_IN_FAT to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 13/34] Convert CONFIG_ENV_IS_IN_ONENAND to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 21/34] env: Create a location driver for each location   Tom Rini
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Tom Rini
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Tom Rini
• [U-Boot] [PATCH v2 32/34] env: Rename getenv() and friends to env_get()   Tom Rini
• [U-Boot] [PATCH v2 02/34] Makefile: Rename 'env' target to 'environ'   Tom Rini
• [U-Boot] [PATCH v2 03/34] Move environment files from common/ to env/   Tom Rini
• [U-Boot] [PATCH v2 14/34] env: common: Make env_get_addr/get_char_memory() static   Tom Rini
• [U-Boot] [PATCH v2 15/34] env: common: Drop env_get_addr()   Tom Rini
• [U-Boot] [PATCH v2 16/34] env: common: Factor out the common env_valid check   Tom Rini
• [U-Boot] [PATCH v2 17/34] env: common: Drop env_get_char_init()   Tom Rini
• [U-Boot] [PATCH v2 18/34] env: common: Drop env_get_char_memory()   Tom Rini
• [U-Boot] [PATCH v2 19/34] env: Add an enum for environment state   Tom Rini
• [U-Boot] [PATCH v2 20/34] env: Rename nand env_location to nand_env_location   Tom Rini
• [U-Boot] [PATCH v2 23/34] env: Switch over to use environment location drivers   Tom Rini
• [U-Boot] [PATCH v2 24/34] env: Drop common init() functions   Tom Rini
• [U-Boot] [U-Boot, v2, 1/6] ram: stm32: migrate fmc defines in driver file   Tom Rini
• [U-Boot] [PATCH v2 26/34] env: Drop unused env_ptr variables   Tom Rini
• [U-Boot] [PATCH v2 27/34] env: Drop env_init_new()   Tom Rini
• [U-Boot] [PATCH v2 25/34] env: Drop the env_name_spec global   Tom Rini
• [U-Boot] [PATCH v2 28/34] env: Drop env_get_char_spec()   Tom Rini
• [U-Boot] [PATCH v2 29/34] env: Drop env_relocate_spec() in favour of env_load()   Tom Rini
• [U-Boot] [PATCH v2 30/34] env: Drop saveenv() in favour of env_save()   Tom Rini
• [U-Boot] [PATCH v2 33/34] env: Adjust the get_char() method to return an int   Tom Rini
• [U-Boot] [PATCH v2 34/34] env: Adjust the load() method to return an error   Tom Rini
• [U-Boot] [PATCH 1/3] am43xx: Remove ethboot / usbhost_boot variants   Tom Rini
• [U-Boot] [PATCH 2/3] am335x_hs_evm: Disable CONFIG_SPL_ENV_SUPPORT   Tom Rini
• [U-Boot] [PATCH 3/3] ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HS   Tom Rini
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Tom Rini
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Tom Rini
• [U-Boot] [PATCH v3 03/24] env: Move help from README to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Tom Rini
• [U-Boot] [PATCH v3 24/24] env: Adjust the load() method to return an error   Tom Rini
• [U-Boot] [PATCH v3 11/24] env: Create a location driver for each location   Tom Rini
• [U-Boot] [U-Boot,v2,2/4] pinctrl: meson: add GPIO support   Tom Rini
• [U-Boot] [U-Boot,v2,3/4] odroid-c2: enable GPIO   Tom Rini
• [U-Boot] [U-Boot, 1/2] board: ti: am57xx: Fix detection of board version   Tom Rini
• [U-Boot] [U-Boot, 2/2] board: ti: x15: Add support for beagle_X15 revC   Tom Rini
• [U-Boot] [U-Boot, 1/4] configs: k2x_evm: Adds FIT loading environment variables   Tom Rini
• [U-Boot] [U-Boot, 2/4] configs: k2x_evm: Adds environment variables for secure devices   Tom Rini
• [U-Boot] [U-Boot, 3/4] configs: k2x_evm: Reorder default boot command   Tom Rini
• [U-Boot] [U-Boot, 4/4] arm: mach-keystone: Updates mon_install for K2G HS   Tom Rini
• [U-Boot] configs: ti: armv7: Fixes bug in fit_loadaddr for ramfs boot   Tom Rini
• [U-Boot] arm: mach-keystone: Fixes issue with return values in inline assembly   Tom Rini
• [U-Boot] [U-Boot, 1/9] ARM: DTS: stm32: align DT clock declaration with kernel   Tom Rini
• [U-Boot] [U-Boot, 2/9] clk: stm32f7: add static for configure_clocks()   Tom Rini
• [U-Boot] [U-Boot, 3/9] clk: stm32f7: get RCC base address from DT   Tom Rini
• [U-Boot] [U-Boot, 4/9] clk: stm32f7: add clock .get_rate() callback   Tom Rini
• [U-Boot] [U-Boot, 5/9] clk: stm32f7: cleanup clocks unused definitions   Tom Rini
• [U-Boot] [U-Boot, 6/9] serial: stm32x7: migrate serial struct to driver   Tom Rini
• [U-Boot] [U-Boot, 7/9] serial: stm32x7: add clk_get_rate() support   Tom Rini
• [U-Boot] [U-Boot, 8/9] spi: stm32_qspi: add clk_get_rate() support   Tom Rini
• [U-Boot] [U-Boot,9/9] clk: stm32f7: remove clock_get()   Tom Rini
• [U-Boot] [U-Boot,v2,2/6] ram: stm32: get base address from DT   Tom Rini
• [U-Boot] [U-Boot, v2, 3/6] ram: stm32: replace fdtdec_get by ofnode calls   Tom Rini
• [U-Boot] [U-Boot, v2, 4/6] ram: stm32: add second SDRAM bank management   Tom Rini
• [U-Boot] [U-Boot, v2, 5/6] ARM: DTS: stm32: remove useless mr-nbanks property   Tom Rini
• [U-Boot] [U-Boot,v2,6/6] ram: stm32: add stm32h7 support   Tom Rini
• [U-Boot] FIT: List kernel_noload in the list of types   Tom Rini
• [U-Boot] MAINTAINERS: Update maintainer for x86   Tom Rini
• [U-Boot] Pull request: u-boot-mips v2   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] arm: dts: meson: import dts files from Linux 4.12   Tom Rini
• [U-Boot] [PATCH v2 01/56] spl: add a 'return to bootrom' boot method   Tom Rini
• [U-Boot] [PATCH v2 02/56] spl: configure 'return to bootrom' separately for SPL and TPL   Tom Rini
• [U-Boot] [PATCH v2 09/56] spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)   Tom Rini
• [U-Boot] [PATCH v2 06/56] spl: dm: Kconfig: use more specific prereqs for SPL_REGMAP and SPL_SYSCON   Tom Rini
• [U-Boot] [PATCH v2 08/56] spl: dm: Kconfig: SPL_RAM depends on SPL_DM   Tom Rini
• [U-Boot] [PATCH v2 07/56] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL   Tom Rini
• [U-Boot] [PATCH v2 21/56] drivers: spl: consistently use the $(SPL_TPL_) macro   Tom Rini
• [U-Boot] [PATCH v2 12/56] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL   Tom Rini
• [U-Boot] [PATCH v2 11/56] spl: dm: Kconfig: split CLK support for SPL and TPL   Tom Rini
• [U-Boot] [PATCH v2 13/56] spl: dm: use CONFIG_IS_ENABLED to test for the DM option   Tom Rini
• [U-Boot] [PATCH v2 10/56] spl: dm: Kconfig: SPL_CLK depens on SPL_DM   Tom Rini
• [U-Boot] [PATCH v2 15/56] armv8: spl: Support separate stack for TPL   Tom Rini
• [U-Boot] [PATCH v2 20/56] spl: add TPL_DRIVER_MISC_SUPPORT option   Tom Rini
• [U-Boot] [PATCH v2 19/56] spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds   Tom Rini
• [U-Boot] [PATCH v2 14/56] armv8: remove unused low-level modules from TPL   Tom Rini
• [U-Boot] [PATCH v2 18/56] lib: spl: differentiate between TPL and SPL for libfdt/of_control/of_platdata   Tom Rini
• [U-Boot] [PATCH v2 16/56] spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL   Tom Rini
• [U-Boot] [PATCH v2 17/56] spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL   Tom Rini
• [U-Boot] [PATCH v2 00/56] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Tom Rini
• [U-Boot] Kconfig conversion Question   Tom Rini
• [U-Boot] [PATCH v2 22/34] env: Add a new implementation of environment access   Tom Rini
• [U-Boot] [PATCH v2 31/34] env: Rename setenv() and friends to env_set()   Tom Rini
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH v3 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 2/3] Kconfig: CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Tom Rini
• [U-Boot] [PATCH v3 3/3] config: move USB_FUNCTION_MASS_STORAGE   Tom Rini
• [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Tom Rini
• [U-Boot] [PATCH] env: Migrate CONFIG_ENV_IS_IN_FAT options to Kconfig   Tom Rini
• [U-Boot] [PATCH] Convert CONFIG_SYS_I2C_OMAP24XX et al to Kconfig   Tom Rini
• [U-Boot] Kconfig conversion Question   Tom Rini
• [U-Boot] [PATCH] Remove unused CONFIG_TWL4030_PWM   Tom Rini
• [U-Boot] [PATCH 3/3] ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HS   Tom Rini
• [U-Boot] [PATCH 1/3] am43xx: Remove ethboot / usbhost_boot variants   Tom Rini
• [U-Boot] [PATCH] Convert CONFIG_SYS_I2C_OMAP24XX et al to Kconfig   Tom Rini
• [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Tom Rini
• [U-Boot] [PATCH v3] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   Tom Rini
• [U-Boot] [RFC PATCH] Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig   Tom Rini
• [U-Boot] [PATCH][v2] ARMv8/sec_firmware : Update chosen/kaslr-seed with random number   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CMD_NAND*   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CMD_NAND*   Tom Rini
• [U-Boot] [GIT PULL] u-boot-rockchip/master   Tom Rini
• [U-Boot] [PATCH 0/5] uboot overlays and FIT image   Tom Rini
• [U-Boot] [PATCHv2] configs: Migrate CMD_NAND*   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] Use packed structures for networking   Tom Rini
• [U-Boot] [PATCH] efi_gop.c: Store gd->fb_base as uintptr_t   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH 0/2] misc: i2c_eeprom: Add compatibles   Tom Rini
• [U-Boot] [PATCH] efi_loader: Fix warning in efi_gop   Tom Rini
• [U-Boot] [PULL] efi patch queue 2017-07-29   Tom Rini
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Maxime Ripard
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   Maxime Ripard
• [U-Boot] [PATCH 00/14] dm: sata: mmc: Convert a sunxi board to driver model for MMC, SATA   Maxime Ripard
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Maxime Ripard
• [U-Boot] [PATCH v2 06/15] dm: mmc: sunxi: Rename struct sunxi_mmc_host to sunxi_mmc_priv   Maxime Ripard
• [U-Boot] [PATCH v2 07/15] dm: mmc: sunxi: Rename mmchost to priv   Maxime Ripard
• [U-Boot] [PATCH v2 08/15] dm: mmc: sunxi: Pass private data around explicitly   Maxime Ripard
• [U-Boot] [PATCH v2 09/15] dm: mmc: sunxi: Drop mmc_clk_io_on()   Maxime Ripard
• [U-Boot] [PATCH v2 11/15] dm: sunxi: Linksprite_pcDuino3: Correct polarity of MMC card detect   Maxime Ripard
• [U-Boot] [PATCH v2 13/15] dm: sunxi: sata: Don't build sata support into SPL   Maxime Ripard
• [U-Boot] [PATCH v2 14/15] dm: sata: sunxi: Add support for driver model   Maxime Ripard
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Maxime Ripard
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Maxime Ripard
• [U-Boot] Data Abort with gcc 7.1   Maxime Ripard
• [U-Boot] [PATCHv4 0/2] ARM: sunxi: Add support for OLinuXino Lime2 eMMC   Maxime Ripard
• [U-Boot] Data Abort with gcc 7.1   Maxime Ripard
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Maxime Ripard
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Maxime Ripard
• [U-Boot] [PATCH] sunxi: usb_phy: Fix the phy_ctl offset on the A83T   Maxime Ripard
• [U-Boot] [PATCH 1/2] mmc: sunxi: Support the new mode   Maxime Ripard
• [U-Boot] [PATCH 2/2] sunxi: Enable MMC new mode for A83T   Maxime Ripard
• [U-Boot] Data Abort with gcc 7.1   Maxime Ripard
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Maxime Ripard
• [U-Boot] [PATCH v2 3/3] config: move USB_FUNCTION_MASS_STORAGE   Maxime Ripard
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Maxime Ripard
• [U-Boot] [PATCH 1/2] mmc: sunxi: Support the new mode   Maxime Ripard
• [U-Boot] [PATCH v2 3/3] config: move USB_FUNCTION_MASS_STORAGE   Maxime Ripard
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Maxime Ripard
• [U-Boot] [PATCH] sunxi: Fix CONFIG_SUNXI_GMAC references   Maxime Ripard
• [U-Boot] [PATCH 2/2] sunxi: switch PRCM to non-secure on H3/H5 SoCs   Maxime Ripard
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Maxime Ripard
• [U-Boot] [PATCH] mx6cuboxi: Add support for sata   Peter Robinson
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Peter Robinson
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   Peter Robinson
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2017.07-rc2 released   Peter Robinson
• [U-Boot] [PATCH] libfdt: Drop -FDT_ERR_TOODEEP   Peter Robinson
• [U-Boot] U-Boot image with multiple u-Boot dt blobs selected at low level boot   Peter Robinson
• [U-Boot] Cubox-i broken   Peter Robinson
• [U-Boot] Data Abort with gcc 7.1   Peter Robinson
• [U-Boot] Cubox-i broken   Peter Robinson
• [U-Boot] [PATCH v5 0/3] rockchip: firefly: Enabled the USB keyboard in the uboot   Peter Robinson
• [U-Boot] [PATCH v4 3/7] arch/arm/dts: Add Turris Omnia device tree   Stefan Roese
• [U-Boot] [PATCH v4 3/7] arch/arm/dts: Add Turris Omnia device tree   Stefan Roese
• [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes   Stefan Roese
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Stefan Roese
• [U-Boot] [v2] arm64: mvebu: use single defconfig for Armada8K development boards   Stefan Roese
• [U-Boot] [PATCH 1/4] tools/kwbimage: update the list of SoCs using v1 header   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [EXT] Re: [v2] arm64: mvebu: use single defconfig for Armada8K development boards   Stefan Roese
• [U-Boot] [PATCH] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [PATCH v2] serial: ns16550: Add RX interrupt buffer support   Stefan Roese
• [U-Boot] [PATCH 01/12] x86: theadorable-x86-dfi-bt700: Add Micron SPI support and move VIDEO blob   Stefan Roese
• [U-Boot] [PATCH 02/12] x86: dfi: Add option to select different config headers for baseboards   Stefan Roese
• [U-Boot] [PATCH 03/12] x86: conga: Add option to select different config headers for baseboards   Stefan Roese
• [U-Boot] [PATCH 04/12] x86: theadorable-x86: Add header file for common defines and env   Stefan Roese
• [U-Boot] [PATCH 05/12] x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT   Stefan Roese
• [U-Boot] [PATCH 06/12] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs   Stefan Roese
• [U-Boot] [PATCH 07/12] x86: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH 08/12] x86: theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH 09/12] x86: dfi-bt700: Add xHCI USB hub reset   Stefan Roese
• [U-Boot] [PATCH 10/12] x86: dfi-bt700.dtsi: Enable xHCI and add GPIO for the xHCI HUB reset   Stefan Roese
• [U-Boot] [PATCH 11/12] x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts   Stefan Roese
• [U-Boot] [PATCH 12/12] x86: theadorable-x86-xxx_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH v2 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Stefan Roese
• [U-Boot] [PATCH 01/11 v2] x86: theadorable-x86-dfi-bt700: Add Spansion SPI support and move VIDEO blob   Stefan Roese
• [U-Boot] [PATCH 02/11 v2] x86: dfi: Add option to select different config headers for baseboards   Stefan Roese
• [U-Boot] [PATCH 03/11 v2] x86: conga: Add option to select different config headers for baseboards   Stefan Roese
• [U-Boot] [PATCH 04/11 v2] x86: theadorable-x86: Add header file for common defines and env   Stefan Roese
• [U-Boot] [PATCH 05/11 v2] x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INIT   Stefan Roese
• [U-Boot] [PATCH 06/11 v2] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs   Stefan Roese
• [U-Boot] [PATCH 07/11 v2] x86: theadorable-x86-conga-qa3-e3845_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH 08/11 v2] x86: theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH 09/11 v2] x86: dfi-bt700: Add xHCI USB support   Stefan Roese
• [U-Boot] [PATCH 10/11 v2] x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts   Stefan Roese
• [U-Boot] [PATCH 11/11 v2] x86: theadorable-x86-xxx_defconfig: Misc defconfig updates   Stefan Roese
• [U-Boot] [PATCH v5 00/10] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 01/10] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 02/10] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 03/10] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 04/10] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 05/10] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 06/10] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 07/10] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 08/10] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 09/10] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 10/10] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 0/4] mips: bmips: add HSSPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 1/4] dm: spi: add BCM63xx HSSPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un   Álvaro Fernández Rojas
• [U-Boot] [PATCH v3 2/2] MIPS: Stop building position independent code   Álvaro Fernández Rojas
• [U-Boot] [PATCH v3 2/2] MIPS: Stop building position independent code   Álvaro Fernández Rojas
• [U-Boot] [PATCH v3 1/1] mmc: Add MMC support for stm32h7 Socs   Philipp Rossak
• [U-Boot] Data Abort with gcc 7.1   Måns Rullgård
• [U-Boot] Data Abort with gcc 7.1   Måns Rullgård
• [U-Boot] Data Abort with gcc 7.1   Måns Rullgård
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Otavio Salvador
• [U-Boot] [PATCH 2/4] wandboard: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCH 3/4] mx6cuboxi: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCH 4/4] embestmx6boards: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCH 1/4] wandboard: Set fdt based on board_rev and board_name   Otavio Salvador
• [U-Boot] [PATCH] warp: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCHv4 0/2] ARM: sunxi: Add support for OLinuXino Lime2 eMMC   Olliver Schinagl
• [U-Boot] [PATCH] board/BuR/brppt1: fix MMC boot   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/brppt1: fix MMC boot   Hannes Schmelzer
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Thomas Schmitt
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Thomas Schmitt
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   Thomas Schmitt
• [U-Boot] [ANN] U-Boot v2017.07-rc3 released   Heiko Schocher
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Heiko Schocher
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Heiko Schocher
• [U-Boot] [PATCH v2] avr32: Retire AVR32 for good   Heiko Schocher
• [U-Boot] [PATCH v1 1/3] wdt: Fix spelling Resettting -> Resetting   Heiko Schocher
• [U-Boot] [PATCH v1 2/3] wdt: Timeout better to be in microseconds   Heiko Schocher
• [U-Boot] [PATCH v1 3/3] wdt: Unify option of timeout value   Heiko Schocher
• [U-Boot] [PATCH v2 01/10] powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/   Heiko Schocher
• [U-Boot] [PATCH v2 02/10] powerpc, 8xx: move specific reginfo   Heiko Schocher
• [U-Boot] [PATCH v2 03/10] powerpc, 8xx: Use IO accessors to access IO memory   Heiko Schocher
• [U-Boot] [PATCH v2 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Heiko Schocher
• [U-Boot] [PATCH v2 05/10] powerpc, 8xx: Handle checkpatch errors and some of the warnings/checks   Heiko Schocher
• [U-Boot] [PATCH v2 06/10] powerpc, 8xx: Properly set CPM frequency in the device tree   Heiko Schocher
• [U-Boot] [PATCH v2 07/10] powerpc, 8xx: Migrate to Kconfig   Heiko Schocher
• [U-Boot] [PATCH v2] powerpc, 8xx: Add support for MCR3000 board from CSSI   Heiko Schocher
• [U-Boot] [PATCH v2b 04/10] powerpc, 8xx: Implement GLL2 ERRATA   Heiko Schocher
• [U-Boot] [PATCH v3] powerpc, 8xx: Add support for MCR3000 board from CSSI   Heiko Schocher
• [U-Boot] [U-Boot, 2/2] efi_loader: check CreateEvent() parameters   Heinrich Schuchardt
• [U-Boot] Pull request: efi_loader: check CreateEvent() parameters   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/3] Handling of EFI application exit   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/3] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/3] efi_loader: provide meaningful status code   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/3] efi_loader: define all known status codes   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: abort on unsupported relocation type   Heinrich Schuchardt
• [U-Boot] [PULL 0/6] efi patch queue 2017-07-03   Heinrich Schuchardt
• [U-Boot] [BUG] checkpatch: false positive storage class location   Heinrich Schuchardt
• [U-Boot] [BUG] checkpatch: false positive storage class location   Heinrich Schuchardt
• [U-Boot] [PATCH v3 0/3] Handling of EFI application exit   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/3] bootefi: allow return without EFI_BOOT_SERVICES.Exit   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/3] efi_loader: define all known status codes   Heinrich Schuchardt
• [U-Boot] [PATCH v3 3/3] efi_loader: provide meaningful status code   Heinrich Schuchardt
• [U-Boot] [PATCH 0/9] EFI protocol services   Heinrich Schuchardt
• [U-Boot] [PATCH 1/9] efi_loader: refactor efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 2/9] efi_loader: efi_open_protocol: parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH 3/9] efi_loader: implement InstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH 4/9] efi_loader: implement UninstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH 5/9] efi_loader: refactor efi_install_protocol_interface   Heinrich Schuchardt
• [U-Boot] [PATCH 6/9] efi_loader: refactor efi_uninstall_protocol_interface   Heinrich Schuchardt
• [U-Boot] [PATCH 7/9] efi_loader: implement InstallMultipleProtocolInterfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 8/9] efi_loader: refactor efi_locate_handle   Heinrich Schuchardt
• [U-Boot] [PATCH 9/9] efi_loader: implement LocateHandleBuffer   Heinrich Schuchardt
• [U-Boot] [PATCH 0/3] efi_loader: event services   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] efi_loader: implement multiple event support   Heinrich Schuchardt
• [U-Boot] [PATCH 2/3] efi_loader: implement WaitForKey   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] efi_loader: no debug message on wait for key   Heinrich Schuchardt
• [U-Boot] [U-Boot,RFC,v1] wdt: Add a glue driver for watchdog   Heinrich Schuchardt
• [U-Boot] [U-Boot,RFC,v1] wdt: Add a glue driver for watchdog   Heinrich Schuchardt
• [U-Boot] [RFC] efi_loader: memory leak in bootefi   Heinrich Schuchardt
• [U-Boot] [RFC] efi_loader: memory leak in bootefi   Heinrich Schuchardt
• [U-Boot] [PATCH v2 00/12] efi_loader: protocol services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/12] efi_loader: efi_open_protocol: parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH v2 03/12] efi_loader: implement InstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH v2 04/12] efi_loader: implement UninstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/12] efi_loader: refactor efi_install_protocol_interface   Heinrich Schuchardt
• [U-Boot] [PATCH v2 06/12] efi_loader: refactor efi_uninstall_protocol_interface   Heinrich Schuchardt
• [U-Boot] [PATCH v2 07/12] efi_loader: implement InstallMultipleProtocolInterfaces   Heinrich Schuchardt
• [U-Boot] [PATCH v2 08/12] efi_loader: refactor efi_locate_handle   Heinrich Schuchardt
• [U-Boot] [PATCH v2 09/12] efi_loader: implement LocateHandleBuffer   Heinrich Schuchardt
• [U-Boot] [PATCH v2 10/12] efi_loader: provide a sufficient number of protocols   Heinrich Schuchardt
• [U-Boot] [PATCH v2 11/12] efi_loader: reimplement efi_locate_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 12/12] efi_loader: implement EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: disk: iterate only over valid block devices   Heinrich Schuchardt
• [U-Boot] [PATCH 0/4] efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: do not duplicate constants for device path   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] efi_loader: DevicePathToText for MAC address   Heinrich Schuchardt
• [U-Boot] [PATCH 3/4] efi_loader: debug info in efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_loader: parameter check efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/5] efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/5] efi_loader: do not duplicate constants for device path   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/5] efi_loader: DevicePathToText for MAC address   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/5] efi_loader: parameter check efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/5] efi_loader: debug info in efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/5] efi_loader: DevicePathToText put declarations first   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: implement ProtocolsPerHandle   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_memory: avoid NULL dereference in efi_free_pool   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] efi_loader: implement multiple event support   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] efi_loader: implement multiple event support   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] meson-gx: reserved memory regions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/7] efi_loader: event services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/7] efi_loader: use struct efi_event * instead of void *   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/7] efi_loader: implement multiple event support   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/7] efi_loader: correct size for tpl level   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/7] efi_loader: refactor efi_create_event   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/7] efi_loader: refactor efi_set_timer   Heinrich Schuchardt
• [U-Boot] [PATCH v2 6/7] efi_console: set up events   Heinrich Schuchardt
• [U-Boot] [PATCH v2 7/7] efi_loader: correctly implement 100ns conversion   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: parameter types for CreateEvent, SetTimer   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_console: use EFIAPI for callback functions   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: implement ConvertDeviceNodeToText   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_memory: do parameter checks first   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_memory: return MapKey   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: implement ConvertDeviceNodeToText   Heinrich Schuchardt
• [U-Boot] [U-Boot, 3/4] efi_loader: make disk objects for partitions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/12] efi_loader: refactor efi_open_protocol   Heinrich Schuchardt
• [U-Boot] efi_loader: workaround for grub lsefi bug   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] omap3: incorrect logical check in do_emif4_init - Please, pull.   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: add back optional efi_handler::open()   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] efi_loader: add udevice to EFI device-path mapping   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: allow efi_loader code to call EFI interfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] efi_loader: Add an EFI_CALL() macro   Heinrich Schuchardt
• [U-Boot] [PATCH 2/3] efi_loader: add checking for incorrect use of EFI_ENTRY/EXIT   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] efi_loader: indent entry/exit prints to show nesting level   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/7] efi_loader: implement multiple event support   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: add some missing breaks   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: notify when ExitBootServices is invoked   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: write protocol GUID in OpenProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: debug messages for protocol interfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] api: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: spear: do not return random value from stack   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: bcm235xx: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: bcm235xx: clk_set_rate avoid possible NULL deref   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] bcm281xx: clock: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] armv7m: mpu_config add missing break   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: mvebu: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] stm32: remove redundant 'else if'   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] m68k: mfc5227x: do not rely on uninitialized stack values   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused uma_memory_size   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ARM: hisilicon: hikey: do not rely on random stack value   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] tpm: add missing va_end   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: mvebu: remove self assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: mvebu: ddr3_debug: remove self assignments   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] lcd: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ARM64: zynqmp: avoid out of buffer access   Heinrich Schuchardt
• [U-Boot] [PATCH 05/30] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-mips   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: bootm: Fix broken boot_env_legacy codepath   Daniel Schwierzeck
• [U-Boot] [PATCH v2 2/9] mips: spl and normal u-boot stage set SYS_MALLOC_F indepently   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-mips   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-mips   Daniel Schwierzeck
• [U-Boot] [PATCH 05/30] Convert CONFIG_ENV_IS_IN_FLASH to Kconfig   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-mips   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-mips v2   Daniel Schwierzeck
• [U-Boot] [U-Boot, v3, 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Daniel Schwierzeck
• [U-Boot] [PATCH v3 2/2] MIPS: Stop building position independent code   Daniel Schwierzeck
• [U-Boot] [PATCH v3 2/2] MIPS: Stop building position independent code   Daniel Schwierzeck
• [U-Boot] [PATCH] am335x: sl50: Enable CONFIG_AUTOBOOT_KEYED   Enric Balletbo i Serra
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Andy Shevchenko
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Andy Shevchenko
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v2] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Andy Shevchenko
• [U-Boot] [PATCH v1] arch/x86: Select USB before selecting host driver   Andy Shevchenko
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Andy Shevchenko
• [U-Boot] [PATCH v1] avr32: Retire AVR32 for good   Andy Shevchenko
• [U-Boot] [PATCH v2] avr32: Retire AVR32 for good   Andy Shevchenko
• [U-Boot] [PATCH v3] avr32: Retire AVR32 for good   Andy Shevchenko
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v3] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v1 1/3] wdt: Fix spelling Resettting -> Resetting   Andy Shevchenko
• [U-Boot] [PATCH v1 2/3] wdt: Timeout better to be in microseconds   Andy Shevchenko
• [U-Boot] [PATCH v1 3/3] wdt: Unify option of timeout value   Andy Shevchenko
• [U-Boot] [RFC PATCH v1] wdt: Add a glue driver for watchdog   Andy Shevchenko
• [U-Boot] [PATCH v1 3/3] wdt: Unify option of timeout value   Andy Shevchenko
• [U-Boot] [PATCH v1] cpu: Add Intel Tangier support   Andy Shevchenko
• [U-Boot] [U-Boot,RFC,v1] wdt: Add a glue driver for watchdog   Andy Shevchenko
• [U-Boot] [PATCH v1] cpu: Add Intel Tangier support   Andy Shevchenko
• [U-Boot] [PATCH v2 0/3] x86: Introduce Intel Tangier SoC and Edison board   Andy Shevchenko
• [U-Boot] [PATCH v2 1/3] x86: Add dma-mapping.h to architectural code   Andy Shevchenko
• [U-Boot] [PATCH v2 2/3] x86: Add Intel Tangier support   Andy Shevchenko
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Andy Shevchenko
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Andy Shevchenko
• [U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files   Andy Shevchenko
• [U-Boot] [PATCH v3 0/3] x86: Introduce Intel Tangier SoC and Edison board   Andy Shevchenko
• [U-Boot] [PATCH v3 1/3] x86: Add dma-mapping.h to architectural code   Andy Shevchenko
• [U-Boot] [PATCH v3 2/3] x86: Add Intel Tangier support   Andy Shevchenko
• [U-Boot] [PATCH v3 3/3] x86: Add Intel Edison board files   Andy Shevchenko
• [U-Boot] [PATCH v1 2/3] wdt: Timeout better to be in microseconds   Andy Shevchenko
• [U-Boot] [PATCH v3] watchdog: Introduce watchdog driver for Intel Tangier   Andy Shevchenko
• [U-Boot] [PATCH v1 0/7] x86: acpi: Few enhancements and improvements   Andy Shevchenko
• [U-Boot] [PATCH v1 1/7] Makefile: Don't shadow actual error when compile ASL   Andy Shevchenko
• [U-Boot] [PATCH v1 2/7] Makefile: Export build date as integer   Andy Shevchenko
• [U-Boot] [PATCH v1 3/7] x86: acpi: Fill OEM revision   Andy Shevchenko
• [U-Boot] [PATCH v1 4/7] x86: acpi: Name fields in FADT in accordance with specification   Andy Shevchenko
• [U-Boot] [PATCH v1 5/7] x86: acpi: Deduplicate acpi_fill_madt() implementation   Andy Shevchenko
• [U-Boot] [PATCH v1 6/7] x86: acpi: Export acpi_fill_mcfg() with __weak attribute   Andy Shevchenko
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Andy Shevchenko
• [U-Boot] [PATCH v1 0/7] x86: acpi: Few enhancements and improvements   Andy Shevchenko
• [U-Boot] [PATCH v2] arch/x86: Select USB before selecting host driver   Andy Shevchenko
• [U-Boot] [PATCH v1 1/7] Makefile: Don't shadow actual error when compile ASL   Andy Shevchenko
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Andy Shevchenko
• [U-Boot] [PATCH v2] arch/x86: Select USB before selecting host driver   Andy Shevchenko
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Andy Shevchenko
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Andy Shevchenko
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Andy Shevchenko
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Andy Shevchenko
• [U-Boot] [PATCH 2/2] x86: Allow 32-bit toolchain to compile 64-bit U-Boot   Andy Shevchenko
• [U-Boot] [PATCH v1 7/7] x86: acpi: Don't touch hardware on HW reduced platforms   Andy Shevchenko
• [U-Boot] [PATCH 00/22] x86: kconfig clean up   Andy Shevchenko
• [U-Boot] [PATCH v1] x86: Make table address selectable   Andy Shevchenko
• [U-Boot] [PATCH 1/4] tools/kwbimage: update the list of SoCs using v1 header   Baruch Siach
• [U-Boot] [PATCH 2/4] tools/kwbimage.h: make offset marks style consistent   Baruch Siach
• [U-Boot] [PATCH 3/4] tools/kwbimage: fix v1 header verification   Baruch Siach
• [U-Boot] [PATCH 4/4] arm: mvebu: clearfog: fix chip name comment   Baruch Siach
• [U-Boot] [PATCH] sunxi: usb_phy: Fix the phy_ctl offset on the A83T   Siarhei Siamashka
• [U-Boot] [PATCH 1/2] mmc: sunxi: Support the new mode   Siarhei Siamashka
• [U-Boot] Data Abort with gcc 7.1   Siarhei Siamashka
• [U-Boot] Data Abort with gcc 7.1   Siarhei Siamashka
• [U-Boot] Data Abort with gcc 7.1   Siarhei Siamashka
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Siarhei Siamashka
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Siarhei Siamashka
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Siarhei Siamashka
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Siarhei Siamashka
• [U-Boot] 2017.05-RC3 hanging on DM3730   Siarhei Siamashka
• [U-Boot] CPU errata workarounds are using the SPL stack before it is initialized   Siarhei Siamashka
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Siarhei Siamashka
• [U-Boot] [PATCH v3 60/66] spl: moveconfig: migrate CONFIG_SPL_LDSCRIPT   Siarhei Siamashka
• [U-Boot] [PATCH 10/14] dm: mmc: sunxi: Add support for driver model   Siarhei Siamashka
• [U-Boot] [RFC/PATCH 1/2] ni: zynq: Add support for NI Ettus Research Project Sulfur Rev2 SDR   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Label whole PL part as fpga_full region   Michal Simek
• [U-Boot] [PATCH 0/3] Zynq: Add support for UEFI booted Z-Turn   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   Michal Simek
• [U-Boot] [PATCH 1/3] clk: zynqmp: Add support for CCF driver   Michal Simek
• [U-Boot] [PATCH 2/3] clk: zynqmp: Dont panic incase of mmio write/read failures   Michal Simek
• [U-Boot] [PATCH 3/3] clk: zynqmp: Remove unused macros/variables   Michal Simek
• [U-Boot] [PATCH] fpga: xilinx: Avoid using local intermediate buffer   Michal Simek
• [U-Boot] [PATCH 1/8] arm64: zynqmp: Provide a Kconfig option to define OCM and TCM in MMU   Michal Simek
• [U-Boot] [PATCH 2/8] arm64: zynqmp: Define a way to intialize TCM   Michal Simek
• [U-Boot] [PATCH 3/8] arm64: zynqmp: Remove ifdef around zynqmp mmio read and write rotuines   Michal Simek
• [U-Boot] [PATCH 4/8] arm64: zynqmp: Call psu_init from board_early_init_f   Michal Simek
• [U-Boot] [PATCH 5/8] arm64: zynqmp: Add Kconfig option for adding psu_init to binary   Michal Simek
• [U-Boot] [PATCH 6/8] arm64: zynqmp: Fix SVD mask for getting chip ID   Michal Simek
• [U-Boot] [PATCH 7/8] arm64: zynqmp: Do not setup time if already setup   Michal Simek
• [U-Boot] [PATCH 8/8] arm64: zynqmp: Dont write to system timestamp generator   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Move dts zcu102 to zcu102-revA   Michal Simek
• [U-Boot] [PATCH 1/3] arm64: zynqmp: Modify chip_id routine to get either idcode or version   Michal Simek
• [U-Boot] [PATCH 2/3] arm64: zynqmp: Make chip_id a global routine()   Michal Simek
• [U-Boot] [PATCH 3/3] arm64: zynqmp: Make chip_id routine to handle based on el.   Michal Simek
• [U-Boot] [PATCH 1/1] ARM64: zynqmp: avoid out of buffer access   Michal Simek
• [U-Boot] [PATCH 1/1] ARM64: zynqmp: avoid out of buffer access   Michal Simek
• [U-Boot] [PATCH 1/1] ARM64: zynqmp: avoid out of buffer access   Michal Simek
• [U-Boot] [PATCH 00/51] gdsys: Add support for Gazerbeam board   Mario Six
• [U-Boot] [PATCH 01/51] i2c: fsl_i2c: Fix style violations   Mario Six
• [U-Boot] [PATCH 02/51] i2c: fsl_i2c: Remove inline declarations   Mario Six
• [U-Boot] [PATCH 03/51] gdsys: Post ppc4xx removal cleanup   Mario Six
• [U-Boot] [PATCH 04/51] net: phy: marvell: Fix style violations   Mario Six
• [U-Boot] [PATCH 05/51] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Mario Six
• [U-Boot] [PATCH 06/51] cmd: Add command for calculating binary operations   Mario Six
• [U-Boot] [PATCH 07/51] phy: Allow forcing clause 45 access   Mario Six
• [U-Boot] [PATCH 08/51] phy: Fix style violations   Mario Six
• [U-Boot] [PATCH 09/51] phy: Support Marvell 88X2242   Mario Six
• [U-Boot] [PATCH 10/51] net:phy:marvell Add hook for m88e1510 board config   Mario Six
• [U-Boot] [PATCH 11/51] powerpc: mpc83xx: Implement get_serial_clock()   Mario Six
• [U-Boot] [PATCH 12/51] cfi_flash: Fix style violations   Mario Six
• [U-Boot] [PATCH 13/51] cfi_flash: Clean up code some more   Mario Six
• [U-Boot] [PATCH 14/51] cfi_flash: Always define cfi_flash_num_flash_banks   Mario Six
• [U-Boot] [PATCH 15/51] gpio: mpc85xx_gpio: Fix style violations   Mario Six
• [U-Boot] [PATCH 16/51] gpio: mpc85xx_gpio: Make compatible with MPC8XXX   Mario Six
• [U-Boot] [PATCH 17/51] cmd: mdio: Fix style violations   Mario Six
• [U-Boot] [PATCH 18/51] cmd: mdio: Add 'driver' subcommand   Mario Six
• [U-Boot] [PATCH 19/51] common: board_f: Fix style violations   Mario Six
• [U-Boot] [PATCH 20/51] common: board_r: Fix style violations   Mario Six
• [U-Boot] [PATCH 21/51] common: Extend board-specific DT fixup   Mario Six
• [U-Boot] [PATCH 22/51] gdsys: mpc8308: Fix style violations   Mario Six
• [U-Boot] [PATCH 23/51] gdsys: mpc8308: Use shadow register for output GPIO values   Mario Six
• [U-Boot] [PATCH 24/51] gdsys: mpc8308: Move SYS_FPGA{0, 1}_{BASE, SIZE} to Kconfig   Mario Six
• [U-Boot] [PATCH 25/51] gdsys: Introduce GDSYS_LEGACY_DRIVERS   Mario Six
• [U-Boot] [PATCH 26/51] strider, hrcon: Reset CAT phy on CON2 module   Mario Six
• [U-Boot] [PATCH 27/51] gdsys:phy: Adapt fixup_88e1518() to latest Release Notes   Mario Six
• [U-Boot] [PATCH 28/51] i2c: ihs_i2c: Prepare DM conversion   Mario Six
• [U-Boot] [PATCH 29/51] i2c: ihs_i2c: Make DM compatible   Mario Six
• [U-Boot] [PATCH 30/51] i2c: ihs_i2c: Factor out send_buffer method   Mario Six
• [U-Boot] [PATCH 31/51] gdsys: mpc8308: Add FPGA flavor option   Mario Six
• [U-Boot] [PATCH 32/51] drivers: Add ihs_fpga and gdsys_soc drivers   Mario Six
• [U-Boot] [PATCH 33/51] drivers: Add transmitter uclass   Mario Six
• [U-Boot] [PATCH 34/51] transmitter: Add Xilinx LogiCore DP TX   Mario Six
• [U-Boot] [PATCH 35/51] drivers: Add ICS8N3QV01 driver   Mario Six
• [U-Boot] [PATCH 36/51] drivers: Add ihs_axi driver   Mario Six
• [U-Boot] [PATCH 37/51] drivers: Add ihs_video_out driver   Mario Six
• [U-Boot] [PATCH 38/51] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Mario Six
• [U-Boot] [PATCH 39/51] drivers: Add gdsys_ioep driver   Mario Six
• [U-Boot] [PATCH 40/51] cmd: Add ihs osd commands   Mario Six
• [U-Boot] [PATCH 41/51] cmd: Add ihs axi command   Mario Six
• [U-Boot] [PATCH 42/51] cmd: Add ihs fpga command   Mario Six
• [U-Boot] [PATCH 43/51] gdsys: cmd_ioloop: Fix style violations   Mario Six
• [U-Boot] [PATCH 44/51] gdsys: cmd_ioloop: Introduce commenting enum   Mario Six
• [U-Boot] [PATCH 45/51] gdsys: cmd_ioloop: Make DM compatible   Mario Six
• [U-Boot] [PATCH 46/51] ihs_mdio: Add support to force clause45 access   Mario Six
• [U-Boot] [PATCH 47/51] ihs_mdio: Fix style violations   Mario Six
• [U-Boot] [PATCH 48/51] ihs_mdio: Make DM-compatible   Mario Six
• [U-Boot] [PATCH 49/51] gazerbeam: Import Linux DT   Mario Six
• [U-Boot] [PATCH 50/51] gazerbeam: Add u-boot specific dts include file   Mario Six
• [U-Boot] [PATCH 51/51] mpc83xx: Add gazerbeam board   Mario Six
• [U-Boot] [PATCH 16/51] gpio: mpc85xx_gpio: Make compatible with MPC8XXX   Mario Six
• [U-Boot] [PATCH 13/51] cfi_flash: Clean up code some more   Mario Six
• [U-Boot] [PATCH 06/51] cmd: Add command for calculating binary operations   Mario Six
• [U-Boot] [PATCH 06/51] cmd: Add command for calculating binary operations   Mario Six
• [U-Boot] [PATCH 07/51] phy: Allow forcing clause 45 access   Mario Six
• [U-Boot] [PATCH 11/51] powerpc: mpc83xx: Implement get_serial_clock()   Mario Six
• [U-Boot] [PATCH 24/51] gdsys: mpc8308: Move SYS_FPGA{0, 1}_{BASE, SIZE} to Kconfig   Mario Six
• [U-Boot] [PATCH 25/51] gdsys: Introduce GDSYS_LEGACY_DRIVERS   Mario Six
• [U-Boot] [PATCH 28/51] i2c: ihs_i2c: Prepare DM conversion   Mario Six
• [U-Boot] [PATCH 29/51] i2c: ihs_i2c: Make DM compatible   Mario Six
• [U-Boot] [PATCH 31/51] gdsys: mpc8308: Add FPGA flavor option   Mario Six
• [U-Boot] [PATCH 35/51] drivers: Add ICS8N3QV01 driver   Mario Six
• [U-Boot] [PATCH 41/51] cmd: Add ihs axi command   Mario Six
• [U-Boot] [PATCH 09/51] phy: Support Marvell 88X2242   Mario Six
• [U-Boot] [PATCH 18/51] cmd: mdio: Add 'driver' subcommand   Mario Six
• [U-Boot] [PATCH 21/51] common: Extend board-specific DT fixup   Mario Six
• [U-Boot] [PATCH 32/51] drivers: Add ihs_fpga and gdsys_soc drivers   Mario Six
• [U-Boot] [PATCH 33/51] drivers: Add transmitter uclass   Mario Six
• [U-Boot] [PATCH 34/51] transmitter: Add Xilinx LogiCore DP TX   Mario Six
• [U-Boot] [PATCH 37/51] drivers: Add ihs_video_out driver   Mario Six
• [U-Boot] [PATCH 38/51] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Mario Six
• [U-Boot] [PATCH 39/51] drivers: Add gdsys_ioep driver   Mario Six
• [U-Boot] [PATCH 40/51] cmd: Add ihs osd commands   Mario Six
• [U-Boot] [PATCH 36/51] drivers: Add ihs_axi driver   Mario Six
• [U-Boot] [PATCH 42/51] cmd: Add ihs fpga command   Mario Six
• [U-Boot] [PATCH 10/51] net:phy:marvell Add hook for m88e1510 board config   Mario Six
• [U-Boot] [PATCH 51/51] mpc83xx: Add gazerbeam board   Mario Six
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Mario Six
• [U-Boot] Nios II 10m50 is not working   Kirill Smirnov
• [U-Boot] [PATCH] nios2: tune specific cpu features   Kirill Smirnov
• [U-Boot] U-Boot Tool: fw_setenv - kernel option?   Arno Steffens
• [U-Boot] U-Boot Tool: fw_setenv - kernel option?   Arno Steffens
• [U-Boot] [PATCH v4 01/18] cmd: nand: abstract global variable usage for dm conversion   Grygorii Strashko
• [U-Boot] [PATCH v4 01/18] cmd: nand: abstract global variable usage for dm conversion   Grygorii Strashko
• [U-Boot] [PATCH 26/52] rockchip: rk3368: define CONFIG_SYS_SDRAM_BASE   Heiko Stuebner
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Heiko Stübner
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Heiko Stübner
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Heiko Stübner
• [U-Boot] mpc85xx boards   York Sun
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   York Sun
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   York Sun
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   York Sun
• [U-Boot] [RFC PATCH] common: board_f: Make reserve_mmu a weak function   York Sun
• [U-Boot] compilation failure on Powerpc with SPL   York Sun
• [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   York Sun
• [U-Boot] [PATCH] armv8: ls2080aqds: enable PPA support for SD boot   York Sun
• [U-Boot] [PATCH v4] arm64: ls1043ardb: Add distro boot support   York Sun
• [U-Boot] [PATCH v3] Makefile: Concatenation of u-boot-spl.bin and u-boot.img   York Sun
• [U-Boot] [PATCH v4] arm64: ls1043ardb: Add distro boot support   York Sun
• [U-Boot] [PATCH] arm64: ls2088ardb: Add distro secure boot support   York Sun
• [U-Boot] [PATCH] board/freescale: Share qbman init between archs   York Sun
• [U-Boot] compilation failure on Powerpc with SPL   York Sun
• [U-Boot] rk3288: Hang at Returning to boot ROM   Jagan Teki
• [U-Boot] rk3288: Hang at Returning to boot ROM   Jagan Teki
• [U-Boot] [PATCH 1/2] sf: Add Macronix MX25U6435F device parameters   Jagan Teki
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Daniel Thompson
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Benoît Thébaudeau
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Benoît Thébaudeau
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] armv8: apply -mgeneral-regs-only   Dr. Philipp Tomsich
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Dr. Philipp Tomsich
• [U-Boot] [PATCH] net: gmac_rockchip: Add support for pinctrl   Dr. Philipp Tomsich
• [U-Boot] Data Abort with gcc 7.1   Dr. Philipp Tomsich
• [U-Boot] Pull request: u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH] net: Mark the ip_udp_hdr struct as packed   Dr. Philipp Tomsich
• [U-Boot] Data Abort with gcc 7.1   Dr. Philipp Tomsich
• [U-Boot] Data Abort with gcc 7.1   Dr. Philipp Tomsich
• [U-Boot] Data Abort with gcc 7.1   Dr. Philipp Tomsich
• [U-Boot] Data Abort with gcc 7.1   Dr. Philipp Tomsich
• [U-Boot] [PATCH 2/2] RFC: moveconfig: Use toolchains from buildman   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3229: add dwc2 node for fastboot   Dr. Philipp Tomsich
• [U-Boot] [PATCH 4/6] sunxi: GPIO: introduce sunxi_gpio_setup_dt_pins()   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 3/3] config: move USB_FUNCTION_MASS_STORAGE   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 3/3] config: move USB_FUNCTION_MASS_STORAGE   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: correct the env setting   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: correct the env setting   Dr. Philipp Tomsich
• [U-Boot] [PATCH 34/52] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Dr. Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Dr. Philipp Tomsich
• [U-Boot] [PATCH 2/5] rockchip: rk322x: add sdram driver   Dr. Philipp Tomsich
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Dr. Philipp Tomsich
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Dr. Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Dr. Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Dr. Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Dr. Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Dr. Philipp Tomsich
• [U-Boot] [PATCH v5 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Dr. Philipp Tomsich
• [U-Boot] [U-Boot,3/4] rockchip: clk: update dwmmc clock div   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] rockchip: rk322x: update dts node for mmc   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3288: update the mmc number for fastboot   Dr. Philipp Tomsich
• [U-Boot] [RESENT PATCH] rockchip: puma-rk3399: remove redundance code   Dr. Philipp Tomsich
• [U-Boot] [RESENT PATCH] rockchip: puma-rk3399: remove redundance code   Dr. Philipp Tomsich
• [U-Boot] [GIT PULL] u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3288: update the mmc number for fastboot   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 47/56] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 46/56] rockchip: rk3368: add DRAM controller driver with DRAM initialisation   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 44/56] net: gmac_rockchip: Add support for the RK3368 GMAC   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 32/56] rockchip: pinctrl: rk3368: move IOMUX bit-definitions to pinctrl driver   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 29/56] rockchip: rk3368: grf: use shifted-constants   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 28/56] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 60/66] spl: moveconfig: migrate CONFIG_SPL_LDSCRIPT   Dr. Philipp Tomsich
• [U-Boot] [PATCH] usb: dwc2: make truncation of ep->dma_buf explicit for setdma_rx/tx   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 1/8] usb: Kconfig: config USB_XHCI_ROCKCHIP depends on DM_REGULATOR and DM_USB   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 2/8] usb: host: xhci-rockchip: use fixed regulator to control vbus   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 3/8] rockchip: dts: rk3328: add fixed regulator node for xhci   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 4/8] rockchip: configs: rk3328: enable dwc2 driver and config fastboot   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 5/8] usb: dwc2: use dev_read_bool() instead of fdt_getprop()   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 6/8] rockchip: rk3328: board: add support of dwc2 gadget   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 7/8] rockchip: dts: rk3328: support and enable dwc2   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 8/8] rockchip: dts: rk3399: control vbus of typec by fixed regulator   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchop: video: mipi: Makefile: Add soc specfic driver for rk3399 mipi dsi   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/3] rockchip: video: Makefile: Add soc specific driver for rk3288 mipi dsi   Philipp Tomsich
• [U-Boot] [U-Boot, v8, 4/8] rockchip: configs: rk3328: enable dwc2 driver and config fastboot   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: rk3288: Add pinctrl support for the gmac ethernet interface   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 1/4] power: regulator: rk8xx: Build get_ldo_reg only for SPL   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 2/4] power: regulator: rk8xx: Allow input current/charger shutdown configuration   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 3/4] rockchip: Add basic support for phyCORE-RK3288 SoM based carrier board   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 4/4] doc: rockchip: Add phyCORE-RK3288 RDK to board list   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/4] rockchip: pinctrl: rk3328: use gpio instead of sdmmc-pwren   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 3/4] rockchip: evb-rk3328: enable boot on regulator   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 4/4] rockchip: dts: rk3328-evb: add sdmmc-pwren regulator   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: rk3288: Add pinctrl support for the gmac ethernet interface   Philipp Tomsich
• [U-Boot] [U-Boot,10/13] rockchip: rk3066: add sdram driver   Philipp Tomsich
• [U-Boot] [U-Boot, 12/13] armv7: support rk3066 early back to bootrom in start.S   Philipp Tomsich
• [U-Boot] [U-Boot, 09/13] rockchip: dts: set fifo mode as default for mmc   Philipp Tomsich
• [U-Boot] [U-Boot,06/13] rockchip: rk3066: add core support   Philipp Tomsich
• [U-Boot] [U-Boot,03/13] rockchip: rk3066: add sysreset driver   Philipp Tomsich
• [U-Boot] [U-Boot, 05/13] rockchip: rk3066: add rk3066 platform devicetree file   Philipp Tomsich
• [U-Boot] [U-Boot, 07/13] rockchip: rk3066: add mk808 board files   Philipp Tomsich
• [U-Boot] [PATCH] Makefile: add dependencies to regenerate u-boot.cfg when lost   Philipp Tomsich
• [U-Boot] [U-Boot, 1/5] net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021   Philipp Tomsich
• [U-Boot] [U-Boot, 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Philipp Tomsich
• [U-Boot] [U-Boot, 4/5] net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxx   Philipp Tomsich
• [U-Boot] [U-Boot, 5/5] net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options   Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: clk: rk3368: remove unused fields from rk3368_clk_priv   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: clk: rk3399: remove unused fields from priv-structures   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: rk3368: use correct (i.e. 'rk3368_clk_priv') structure for auto-alloc   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: spl: make boot0 hook TPL safe   Philipp Tomsich
• [U-Boot] [PATCH] dm: Fix typo in include-guard for dm-structs.h   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: clk: rk3368: remove unused fields from rk3368_clk_priv   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: clk: rk3399: remove unused fields from priv-structures   Philipp Tomsich
• [U-Boot] rockchip: clk: rk3368: use correct (i.e. 'rk3368_clk_priv') structure for auto-alloc   Philipp Tomsich
• [U-Boot] rockchip: spl: make boot0 hook TPL safe   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3229: add dwc2 node for fastboot   Philipp Tomsich
• [U-Boot] [PATCH 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Philipp Tomsich
• [U-Boot] [PATCH 2/3] Kconfig: CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH 3/3] config: move USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: timer: make register sizes explicit   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: efuse: dm: change to use dev_read_addr   Philipp Tomsich
• [U-Boot] [PATCH v2 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH v2 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v2 2/3] Kconfig: CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH v2 3/3] config: move USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC via Kconfig   Philipp Tomsich
• [U-Boot] rockchip: timer: make register sizes explicit   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: rk3288: Remove phy reset GPIO pull up   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: rk3288: Revert MAC_TXCLK in pinctrl for GMAC   Philipp Tomsich
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH 01/52] spl: add a 'return to bootrom' boot method   Philipp Tomsich
• [U-Boot] [PATCH 02/52] spl: configure 'return to bootrom' separately for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH 03/52] rockchip: back-to-bootrom: add 'back-to-bootrom' support for AArch64   Philipp Tomsich
• [U-Boot] [PATCH 04/52] rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH 05/52] rockchip: back-to-bootrom: simplify the #ifdef-check for LIBGENERIC in TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH 06/52] spl: dm: Kconfig: use more specific prereqs for SPL_REGMAP and SPL_SYSCON   Philipp Tomsich
• [U-Boot] [PATCH 07/52] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL   Philipp Tomsich
• [U-Boot] [PATCH 08/52] spl: dm: Kconfig: SPL_RAM depends on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH 09/52] spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)   Philipp Tomsich
• [U-Boot] [PATCH 10/52] spl: dm: Kconfig: SPL_CLK depens on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH 11/52] spl: dm: Kconfig: split CLK support for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH 12/52] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH 13/52] spl: dm: use CONFIG_IS_ENABLED to test for the DM option   Philipp Tomsich
• [U-Boot] [PATCH 14/52] armv8: remove unused low-level modules from TPL   Philipp Tomsich
• [U-Boot] [PATCH 15/52] armv8: spl: Support separate stack for TPL   Philipp Tomsich
• [U-Boot] [PATCH 16/52] spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL   Philipp Tomsich
• [U-Boot] [PATCH 17/52] spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH 18/52] lib: spl: differentiate between TPL and SPL for libfdt/of_control/of_platdata   Philipp Tomsich
• [U-Boot] [PATCH 19/52] spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds   Philipp Tomsich
• [U-Boot] [PATCH 20/52] spl: add TPL_DRIVER_MISC_SUPPORT option   Philipp Tomsich
• [U-Boot] [PATCH 21/52] drivers: spl: consistently use the $(SPL_TPL_) macro   Philipp Tomsich
• [U-Boot] [PATCH 22/52] rockchip: Makefile: allow selective inclusion of sdram_common.o from TPL/SPL/U-Boot   Philipp Tomsich
• [U-Boot] [PATCH 23/52] rockchip: rk3368: improve Kconfig text for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH 24/52] rockchip: rk3368: mkimage: add support for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH 25/52] rockchip: rk3368: pmugrf: add definitions for os_reg[0..3]   Philipp Tomsich
• [U-Boot] [PATCH 26/52] rockchip: rk3368: define CONFIG_SYS_SDRAM_BASE   Philipp Tomsich
• [U-Boot] [PATCH 27/52] rockchip: rk3368: spl: define COUNTER_FREQUENCY to 24MHz   Philipp Tomsich
• [U-Boot] [PATCH 28/52] rockchip: rk3368: spl: add memory layout for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH 29/52] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Philipp Tomsich
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Philipp Tomsich
• [U-Boot] [PATCH 31/52] rockchip: pinctrl: rk3368: add GMAC (RGMII only) support   Philipp Tomsich
• [U-Boot] [PATCH 32/52] rockchip: pinctrl: rk3368: add support for configuring the MMC pins   Philipp Tomsich
• [U-Boot] [PATCH 33/52] rockchip: clk: rk3368: implement bandwidth adjust for PLLs   Philipp Tomsich
• [U-Boot] [PATCH 34/52] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Philipp Tomsich
• [U-Boot] [PATCH 35/52] rockchip: clk: rk3368: do not change CPLL/GPLL before returning to BROM   Philipp Tomsich
• [U-Boot] [PATCH 36/52] rockchip: clk: rk3368: implement DPLL (DRAM PLL) support   Philipp Tomsich
• [U-Boot] [PATCH 37/52] rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ   Philipp Tomsich
• [U-Boot] [PATCH 38/52] rockchip: clk: rk3368: implement MMC/SD clock reparenting   Philipp Tomsich
• [U-Boot] [PATCH 39/52] rockchip: clk: rk3368: support configuring the DRAM PLL (from TPL)   Philipp Tomsich
• [U-Boot] [PATCH 40/52] rockchip: clk: rk3368: add support for GMAC (SLCK_MAC) clock   Philipp Tomsich
• [U-Boot] [PATCH 41/52] rockchip: clk: rk3368: mark 'priv' __maybe_unused in rk3368_clk_set_rate()   Philipp Tomsich
• [U-Boot] [PATCH 42/52] net: gmac_rockchip: Add support for the RK3368 GMAC   Philipp Tomsich
• [U-Boot] [PATCH 43/52] rockchip: Makefile: streamline SPL/TPL configuration   Philipp Tomsich
• [U-Boot] [PATCH 44/52] rockchip: rk3368: add DRAM controller driver with DRAM initialisation   Philipp Tomsich
• [U-Boot] [PATCH 45/52] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Philipp Tomsich
• [U-Boot] [PATCH 46/52] rockchip: rk3368: spl: enable SPL_FRAMEWORK in rk3368_common.h   Philipp Tomsich
• [U-Boot] [PATCH 47/52] rockchip: rk3368: spl: add TPL support   Philipp Tomsich
• [U-Boot] [PATCH 48/52] rockchip: rk3368: spl: add SPL support   Philipp Tomsich
• [U-Boot] [PATCH 49/52] rockchip: rk3368: spl: mark SPL and TPL as supported for ROCKCHIP_RK3368   Philipp Tomsich
• [U-Boot] [PATCH 50/52] rockchip: board: lion-rk3368: add support for the RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH 51/52] rockchip: board: puma-rk3399: fix warnings in puma_rk3399/fit_spl_atf.its   Philipp Tomsich
• [U-Boot] [PATCH 52/52] rockchip: board: puma_rk3399: rename ATF firmware   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: phycore: Add ID page of M24C32-D EEPROM   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: phycore: Read configuration EEPROM & set ethaddr in late init   Philipp Tomsich
• [U-Boot] rockchip: dts: firefly using ddr3 1600   Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: put EFI partition entries at 2MB   Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: dts: correct vdd_log setting for firefly-rk3399   Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] power: pwm_regulator: fix the pwm_set_config parameter order   Philipp Tomsich
• [U-Boot] [U-Boot, 3/4] power: pwm_regulator: remove redundance code   Philipp Tomsich
• [U-Boot] [U-Boot, 4/4] rockchip: pwm: add mask for config setting   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: dts: rk3399-puma: put EFI partition entries at 2MB   Philipp Tomsich
• [U-Boot] [U-Boot,1/5] rockchip: rk322x: update dram bank size   Philipp Tomsich
• [U-Boot] [U-Boot,2/5] rockchip: rk322x: add sdram driver   Philipp Tomsich
• [U-Boot] [U-Boot, 3/5] rockchip: dts: rk322x: add sdmmc device node   Philipp Tomsich
• [U-Boot] [U-Boot, 4/5] rockchip: rk322x: pinctrl: using compatible name same with dts   Philipp Tomsich
• [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 01/10] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/10] microblaze: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/10] sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/10] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/10] rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/10] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/10] rockchip: use puts instead of printf when back to bootrom   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/10] rockchip: add u-boot specific dts for rk3036 sdk   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: rk3288: Add reset reason detection   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: phycore: Read configuration EEPROM & set ethaddr in late init   Philipp Tomsich
• [U-Boot] rockchip: use UUID for root partitions   Philipp Tomsich
• [U-Boot] rockchip: rk3288: Add support for drive-strength in PINCTRL   Philipp Tomsich
• [U-Boot] [PATCH] dm: Kconfig: fix typo in help for SPL_PINCTRL   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: rk3399: fix SPI clock code for SPI3   Philipp Tomsich
• [U-Boot] [PATCH v2] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v2 00/56] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH v2 01/56] spl: add a 'return to bootrom' boot method   Philipp Tomsich
• [U-Boot] [PATCH v2 02/56] spl: configure 'return to bootrom' separately for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 03/56] rockchip: back-to-bootrom: add 'back-to-bootrom' support for AArch64   Philipp Tomsich
• [U-Boot] [PATCH v2 04/56] rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 05/56] rockchip: back-to-bootrom: simplify the #ifdef-check for LIBGENERIC in TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 06/56] spl: dm: Kconfig: use more specific prereqs for SPL_REGMAP and SPL_SYSCON   Philipp Tomsich
• [U-Boot] [PATCH v2 07/56] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 08/56] spl: dm: Kconfig: SPL_RAM depends on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH v2 09/56] spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)   Philipp Tomsich
• [U-Boot] [PATCH v2 10/56] spl: dm: Kconfig: SPL_CLK depens on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH v2 11/56] spl: dm: Kconfig: split CLK support for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 12/56] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 13/56] spl: dm: use CONFIG_IS_ENABLED to test for the DM option   Philipp Tomsich
• [U-Boot] [PATCH v2 14/56] armv8: remove unused low-level modules from TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 15/56] armv8: spl: Support separate stack for TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 16/56] spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 17/56] spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 18/56] lib: spl: differentiate between TPL and SPL for libfdt/of_control/of_platdata   Philipp Tomsich
• [U-Boot] [PATCH v2 19/56] spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds   Philipp Tomsich
• [U-Boot] [PATCH v2 20/56] spl: add TPL_DRIVER_MISC_SUPPORT option   Philipp Tomsich
• [U-Boot] [PATCH v2 21/56] drivers: spl: consistently use the $(SPL_TPL_) macro   Philipp Tomsich
• [U-Boot] [PATCH v2 22/56] rockchip: Makefile: allow selective inclusion of sdram_common.o from TPL/SPL/U-Boot   Philipp Tomsich
• [U-Boot] [PATCH v2 23/56] rockchip: rk3368: improve Kconfig text for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v2 24/56] rockchip: rk3368: mkimage: add support for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v2 25/56] rockchip: rk3368: pmugrf: add definitions for os_reg[0..3]   Philipp Tomsich
• [U-Boot] [PATCH v2 26/56] rockchip: rk3368: spl: define COUNTER_FREQUENCY to 24MHz   Philipp Tomsich
• [U-Boot] [PATCH v2 27/56] rockchip: rk3368: spl: add memory layout for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 28/56] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Philipp Tomsich
• [U-Boot] [PATCH v2 29/56] rockchip: rk3368: grf: use shifted-constants   Philipp Tomsich
• [U-Boot] [PATCH v2 30/56] rockchip: pinctrl: rk3368: add GMAC (RGMII only) support   Philipp Tomsich
• [U-Boot] [PATCH v2 31/56] rockchip: pinctrl: rk3368: add support for configuring the MMC pins   Philipp Tomsich
• [U-Boot] [PATCH v2 32/56] rockchip: pinctrl: rk3368: move IOMUX bit-definitions to pinctrl driver   Philipp Tomsich
• [U-Boot] [PATCH v2 33/56] rockchip: pinctrl: rk3368: add SPI support   Philipp Tomsich
• [U-Boot] [PATCH v2 34/56] rockchip: clk: rk3368: implement bandwidth adjust for PLLs   Philipp Tomsich
• [U-Boot] [PATCH v2 35/56] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Philipp Tomsich
• [U-Boot] [PATCH v2 36/56] rockchip: clk: rk3368: do not change CPLL/GPLL before returning to BROM   Philipp Tomsich
• [U-Boot] [PATCH v2 37/56] rockchip: clk: rk3368: implement DPLL (DRAM PLL) support   Philipp Tomsich
• [U-Boot] [PATCH v2 38/56] rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ   Philipp Tomsich
• [U-Boot] [PATCH v2 39/56] rockchip: clk: rk3368: implement MMC/SD clock reparenting   Philipp Tomsich
• [U-Boot] [PATCH v2 40/56] rockchip: clk: rk3368: support configuring the DRAM PLL (from TPL)   Philipp Tomsich
• [U-Boot] [PATCH v2 41/56] rockchip: clk: rk3368: add support for GMAC (SLCK_MAC) clock   Philipp Tomsich
• [U-Boot] [PATCH v2 42/56] rockchip: clk: rk3368: mark 'priv' __maybe_unused in rk3368_clk_set_rate()   Philipp Tomsich
• [U-Boot] [PATCH v2 43/56] rockchip: clk: rk3368: add support for configuring the SPI clocks   Philipp Tomsich
• [U-Boot] [PATCH v2 44/56] net: gmac_rockchip: Add support for the RK3368 GMAC   Philipp Tomsich
• [U-Boot] [PATCH v2 45/56] rockchip: Makefile: streamline SPL/TPL configuration   Philipp Tomsich
• [U-Boot] [PATCH v2 46/56] rockchip: rk3368: add DRAM controller driver with DRAM initialisation   Philipp Tomsich
• [U-Boot] [PATCH v2 47/56] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Philipp Tomsich
• [U-Boot] [PATCH v2 48/56] rockchip: rk3368: spl: enable SPL_FRAMEWORK in rk3368_common.h   Philipp Tomsich
• [U-Boot] [PATCH v2 49/56] rockchip: rk3368: spl: add TPL support   Philipp Tomsich
• [U-Boot] [PATCH v2 50/56] rockchip: spl: make spl-boot-order code reusable (split from rk3399)   Philipp Tomsich
• [U-Boot] [PATCH v2 51/56] rockchip: rk3368: spl: add SPL support   Philipp Tomsich
• [U-Boot] [PATCH v2 52/56] rockchip: rk3368: spl: mark SPL and TPL as supported for ROCKCHIP_RK3368   Philipp Tomsich
• [U-Boot] [PATCH v2 53/56] rockchip: spi: enable support for the rk_spi driver for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v2 54/56] rockchip: board: lion-rk3368: add support for the RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH v2 55/56] rockchip: board: puma-rk3399: fix warnings in puma_rk3399/fit_spl_atf.its   Philipp Tomsich
• [U-Boot] [PATCH v2 56/56] rockchip: board: puma_rk3399: rename ATF firmware   Philipp Tomsich
• [U-Boot] rockchip: efuse: dm: change to use dev_read_addr   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] rockchip: rk322x: update dts node for mmc   Philipp Tomsich
• [U-Boot] [U-Boot,3/4] rockchip: clk: update dwmmc clock div   Philipp Tomsich
• [U-Boot] [U-Boot,4/4] rockchip: clk: remove RATE_TO_DIV   Philipp Tomsich
• [U-Boot] rockchip: clk: rk3399: fix SPI clock code for SPI3   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v3 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH v3 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v3 2/3] Kconfig: CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [PATCH v3 3/3] config: move USB_FUNCTION_MASS_STORAGE   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: rk3288: Revert MAC_TXCLK in pinctrl for GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: phycore: Add ID page of M24C32-D EEPROM   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3229: add dwc2 node for fastboot   Philipp Tomsich
• [U-Boot] rockchip: dts: firefly using ddr3 1600   Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: dts: correct vdd_log setting for firefly-rk3399   Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] power: pwm_regulator: fix the pwm_set_config parameter order   Philipp Tomsich
• [U-Boot] [U-Boot, 3/4] power: pwm_regulator: remove redundance code   Philipp Tomsich
• [U-Boot] [U-Boot, 4/4] rockchip: pwm: add mask for config setting   Philipp Tomsich
• [U-Boot] [U-Boot,1/5] rockchip: rk322x: update dram bank size   Philipp Tomsich
• [U-Boot] [U-Boot, 3/5] rockchip: dts: rk322x: add sdmmc device node   Philipp Tomsich
• [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
• [U-Boot] rockchip: use UUID for root partitions   Philipp Tomsich
• [U-Boot] rockchip: rk3288: Add support for drive-strength in PINCTRL   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] rockchip: rk322x: update dts node for mmc   Philipp Tomsich
• [U-Boot] [U-Boot, 4/5] rockchip: rk322x: pinctrl: using compatible name same with dts   Philipp Tomsich
• [U-Boot] [U-Boot,4/4] rockchip: clk: remove RATE_TO_DIV   Philipp Tomsich
• [U-Boot] [U-Boot,3/4] rockchip: clk: update dwmmc clock div   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: rk3288: Remove phy reset GPIO pull up   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 2/4] rockchip: rk322x: update max-frequency for mmc node   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 3/4] rockchip: clk: update dwmmc clock div   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 4/4] rockchip: clk: remove RATE_TO_DIV   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 2/4] rockchip: rk322x: update max-frequency for mmc node   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 3/4] rockchip: clk: update dwmmc clock div   Philipp Tomsich
• [U-Boot] [U-Boot, RESENT, v2, 4/4] rockchip: clk: remove RATE_TO_DIV   Philipp Tomsich
• [U-Boot] rockchip: timer: make register sizes explicit   Philipp Tomsich
• [U-Boot] rockchip: efuse: dm: change to use dev_read_addr   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: rk3288: Remove phy reset GPIO pull up   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: rk3288: Revert MAC_TXCLK in pinctrl for GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: phycore: Add ID page of M24C32-D EEPROM   Philipp Tomsich
• [U-Boot] rockchip: dts: firefly using ddr3 1600   Philipp Tomsich
• [U-Boot] [U-Boot, 1/4] rockchip: dts: correct vdd_log setting for firefly-rk3399   Philipp Tomsich
• [U-Boot] [U-Boot, 2/4] power: pwm_regulator: fix the pwm_set_config parameter order   Philipp Tomsich
• [U-Boot] [U-Boot, 3/4] power: pwm_regulator: remove redundance code   Philipp Tomsich
• [U-Boot] [U-Boot, 4/4] rockchip: pwm: add mask for config setting   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3229: add dwc2 node for fastboot   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 01/10] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/10] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/10] rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/10] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/10] rockchip: use puts instead of printf when back to bootrom   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/10] rockchip: add u-boot specific dts for rk3036 sdk   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/10] microblaze: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/10] sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation   Philipp Tomsich
• [U-Boot] rockchip: use UUID for root partitions   Philipp Tomsich
• [U-Boot] rockchip: rk3288: Add support for drive-strength in PINCTRL   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Philipp Tomsich
• [U-Boot] [U-Boot, v6, 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT via Kconfig   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/10] microblaze: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 01/10] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/10] microblaze: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/10] sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/10] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/10] rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/10] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/10] rockchip: use puts instead of printf when back to bootrom   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/10] rockchip: add u-boot specific dts for rk3036 sdk   Philipp Tomsich
• [U-Boot] [RFC PATCH 0/6] rockchip: rk3368: remove secure timer usage and use DM timer   Philipp Tomsich
• [U-Boot] [RFC PATCH 1/6] timer: add OF_PLATDATA support for timer-uclass   Philipp Tomsich
• [U-Boot] [RFC PATCH 2/6] dm: timer: normalise SPL and TPL support   Philipp Tomsich
• [U-Boot] [RFC PATCH 3/6] rockchip: timer: add device-model timer driver for RK3368 (and similar)   Philipp Tomsich
• [U-Boot] [RFC PATCH 4/6] dts: rk3368: make timer0 accessible for SPL and TPL   Philipp Tomsich
• [U-Boot] [RFC PATCH 5/6] rockchip: lion-rk3368: defconfig: enable DM timer for all stages   Philipp Tomsich
• [U-Boot] [RFC PATCH 6/6] rockchip: rk3368: remove setup of secure timer from TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 00/66] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH v3 01/66] spl: add a 'return to bootrom' boot method   Philipp Tomsich
• [U-Boot] [PATCH v3 02/66] spl: configure 'return to bootrom' separately for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 03/66] rockchip: back-to-bootrom: add 'back-to-bootrom' support for AArch64   Philipp Tomsich
• [U-Boot] [PATCH v3 04/66] rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 05/66] rockchip: back-to-bootrom: simplify the #ifdef-check for LIBGENERIC in TPL/SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 06/66] spl: adapts SYS_MALLOC_F_LEN for TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 07/66] spl: dm: Kconfig: fix help text for SPL/TPL confusion   Philipp Tomsich
• [U-Boot] [PATCH v3 08/66] spl: dm: Kconfig: use more specific prereqs for SPL_REGMAP and SPL_SYSCON   Philipp Tomsich
• [U-Boot] [PATCH v3 09/66] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 10/66] spl: dm: Kconfig: SPL_RAM depends on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH v3 11/66] spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)   Philipp Tomsich
• [U-Boot] [PATCH v3 12/66] spl: dm: Kconfig: SPL_CLK depends on SPL_DM   Philipp Tomsich
• [U-Boot] [PATCH v3 13/66] spl: dm: Kconfig: split CLK support for SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 14/66] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 15/66] spl: dm: use CONFIG_IS_ENABLED to test for the DM option   Philipp Tomsich
• [U-Boot] [PATCH v3 16/66] armv8: move low-level assembly functions into function-sections   Philipp Tomsich
• [U-Boot] [PATCH v3 17/66] armv8: spl: Support separate stack for TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 18/66] spl: allow a separate TEXT_BASE, LDSCRIPT and MAX_SIZE for TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 19/66] spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 20/66] lib: spl: differentiate between TPL and SPL for libfdt/of_control/of_platdata   Philipp Tomsich
• [U-Boot] [PATCH v3 21/66] spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds   Philipp Tomsich
• [U-Boot] [PATCH v3 22/66] spl: add TPL_DRIVER_MISC_SUPPORT option   Philipp Tomsich
• [U-Boot] [PATCH v3 23/66] drivers: spl: consistently use the $(SPL_TPL_) macro   Philipp Tomsich
• [U-Boot] [PATCH v3 24/66] rockchip: Makefile: allow selective inclusion of sdram_common.o from TPL/SPL/U-Boot   Philipp Tomsich
• [U-Boot] [PATCH v3 25/66] rockchip: rk3368: improve Kconfig text for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v3 26/66] rockchip: rk3368: mkimage: add support for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v3 27/66] rockchip: rk3368: pmugrf: add definitions for os_reg[0..3]   Philipp Tomsich
• [U-Boot] [PATCH v3 28/66] rockchip: rk3368: spl: define COUNTER_FREQUENCY to 24MHz   Philipp Tomsich
• [U-Boot] [PATCH v3 29/66] rockchip: rk3368: spl: add memory layout for TPL and SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 30/66] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Philipp Tomsich
• [U-Boot] [PATCH v3 31/66] rockchip: rk3368: syscon: SGRF support for OF_PLATDATA   Philipp Tomsich
• [U-Boot] [PATCH v3 32/66] rockchip: rk3368: grf: use shifted-constants   Philipp Tomsich
• [U-Boot] [PATCH v3 33/66] rockchip: rk3368: dts: add sgrf node   Philipp Tomsich
• [U-Boot] [PATCH v3 34/66] rockchip: pinctrl: rk3368: add GMAC (RGMII only) support   Philipp Tomsich
• [U-Boot] [PATCH v3 35/66] rockchip: pinctrl: rk3368: add support for configuring the MMC pins   Philipp Tomsich
• [U-Boot] [PATCH v3 36/66] rockchip: pinctrl: rk3368: move IOMUX bit-definitions to pinctrl driver   Philipp Tomsich
• [U-Boot] [PATCH v3 37/66] rockchip: pinctrl: rk3368: add SPI support   Philipp Tomsich
• [U-Boot] [PATCH v3 38/66] rockchip: clk: rk3368: implement bandwidth adjust for PLLs   Philipp Tomsich
• [U-Boot] [PATCH v3 39/66] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Philipp Tomsich
• [U-Boot] [PATCH v3 40/66] rockchip: clk: rk3368: do not change CPLL/GPLL before returning to BROM   Philipp Tomsich
• [U-Boot] [PATCH v3 41/66] rockchip: clk: rk3368: implement DPLL (DRAM PLL) support   Philipp Tomsich
• [U-Boot] [PATCH v3 42/66] rockchip: clk: rk3368: define DMA1_SRST_REQ and DMA2_SRST_REQ   Philipp Tomsich
• [U-Boot] [PATCH v3 43/66] rockchip: clk: rk3368: implement MMC/SD clock reparenting   Philipp Tomsich
• [U-Boot] [PATCH v3 44/66] rockchip: clk: rk3368: support configuring the DRAM PLL (from TPL)   Philipp Tomsich
• [U-Boot] [PATCH v3 45/66] rockchip: clk: rk3368: add support for GMAC (SLCK_MAC) clock   Philipp Tomsich
• [U-Boot] [PATCH v3 46/66] rockchip: clk: rk3368: mark 'priv' __maybe_unused in rk3368_clk_set_rate()   Philipp Tomsich
• [U-Boot] [PATCH v3 47/66] rockchip: clk: rk3368: add support for configuring the SPI clocks   Philipp Tomsich
• [U-Boot] [PATCH v3 48/66] net: gmac_rockchip: Add support for the RK3368 GMAC   Philipp Tomsich
• [U-Boot] [PATCH v3 49/66] rockchip: Makefile: streamline SPL/TPL configuration   Philipp Tomsich
• [U-Boot] [PATCH v3 50/66] rockchip: rk3368: add DRAM controller driver with DRAM initialisation   Philipp Tomsich
• [U-Boot] [PATCH v3 51/66] rockchip: rk3368: dts: add DMC node in rk3368.dtsi   Philipp Tomsich
• [U-Boot] [PATCH v3 52/66] rockchip: rk3368: spl: enable SPL_FRAMEWORK in rk3368_common.h   Philipp Tomsich
• [U-Boot] [PATCH v3 53/66] rockchip: rk3368: spl: add TPL support   Philipp Tomsich
• [U-Boot] [PATCH v3 54/66] rockchip: spl: make spl-boot-order code reusable (split from rk3399)   Philipp Tomsich
• [U-Boot] [PATCH v3 55/66] rockchip: rk3368: spl: add SPL support   Philipp Tomsich
• [U-Boot] [PATCH v3 56/66] rockchip: rk3368: spl: mark SPL and TPL as supported for ROCKCHIP_RK3368   Philipp Tomsich
• [U-Boot] [PATCH v3 57/66] rockchip: spi: enable support for the rk_spi driver for the RK3368   Philipp Tomsich
• [U-Boot] [PATCH v3 58/66] rockchip: board: lion-rk3368: add support for the RK3368-uQ7   Philipp Tomsich
• [U-Boot] [PATCH v3 59/66] spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v3 60/66] spl: moveconfig: migrate CONFIG_SPL_LDSCRIPT   Philipp Tomsich
• [U-Boot] [PATCH v3 61/66] spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH v3 62/66] armv8: TPL_STACK will always be defined, so test CONFIG_TPL_NEEDS_SEPARATE_STACK   Philipp Tomsich
• [U-Boot] [PATCH v3 63/66] rockchip: rk3368: mark TPL as not inheriting its stack, text-base and size from SPL   Philipp Tomsich
• [U-Boot] [PATCH v3 64/66] moveconfig: migrate TPL_STACK, TPL_TEXT_BASE and TPL_MAX_SIZE   Philipp Tomsich
• [U-Boot] [PATCH v3 65/66] rockchip: board: puma-rk3399: fix warnings in puma_rk3399/fit_spl_atf.its   Philipp Tomsich
• [U-Boot] [PATCH v3 66/66] rockchip: board: puma_rk3399: rename ATF firmware   Philipp Tomsich
• [U-Boot] Sinovoip M2+ defconfig   Chen-Yu Tsai
• [U-Boot] A80 (CubieBoard4) u-boot - what to inject in boot0 area?   Chen-Yu Tsai
• [U-Boot] A80 (CubieBoard4) u-boot - what to inject in boot0 area?   Chen-Yu Tsai
• [U-Boot] [PATCH] bch: Fix build on FreeBSD host   Emmanuel Vadot
• [U-Boot] [PATCH 1/5] libfdt.h: Introduce FDT_PATH_MAX   Marek Vasut
• [U-Boot] [PATCH 2/5] libfdt_env.h: Add <malloc.h> in libfdt environment   Marek Vasut
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Marek Vasut
• [U-Boot] [PATCH 5/5] fit: Introduce methods for applying overlays on fit-load   Marek Vasut
• [U-Boot] CONFIG_USB_EHCI_HCD breaks xHCI drivers even on DM   Marek Vasut
• [U-Boot] [PATCH 4/5] test: overlay: Add unit test for stacked overlay   Marek Vasut
• [U-Boot] [PATCH 2/5] net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers   Marek Vasut
• [U-Boot] [PATCH v11 2/6] arm: socfpga: Restructure FPGA driver in the preparation to support A10   Marek Vasut
• [U-Boot] [PATCH v11 3/6] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   Marek Vasut
• [U-Boot] [PATCH v11 5/6] drivers: Enable FPGA driver build on SPL   Marek Vasut
• [U-Boot] [PATCH v11 6/6] arm: socfpga: Add FPGA driver support for Arria 10   Marek Vasut
• [U-Boot] [PATCH v11 0/6] Add Intel Arria 10 SoC FPGA driver   Marek Vasut
• [U-Boot] [PATCH v11 3/6] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   Marek Vasut
• [U-Boot] [PATCH] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [PATCH 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Marek Vasut
• [U-Boot] [PATCH 1/3] usb: gadget: move USB_FUNCTION_MASS_STORAGE to Kconfig   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [RESEND PATCH 0/8] sf: improve support of (Q)SPI flash memories   Marek Vasut
• [U-Boot] [PATCH v2 0/3] CMD_USB_MASS_STORAGE implies USB_FUNCTION_MASS_STORAGE   Marek Vasut
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   Marek Vasut
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   Marek Vasut
• [U-Boot] [PATCH v2 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Marek Vasut
• [U-Boot] [PATCH v7 0/5] Extend xhci-dwc3   Marek Vasut
• [U-Boot] [RESEND PATCH v10 00/10] usb: Extend ehci and ohci generic driver   Marek Vasut
• [U-Boot] [PATCH v2 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Marek Vasut
• [U-Boot] [PATCH] ARM: Mark AE boards orphan   Marek Vasut
• [U-Boot] [PATCH v3 00/15] usb: hub: Support USB 3.0 hubs   Marek Vasut
• [U-Boot] [PATCH v4 00/18] usb: xhci: Fix USB xHCI support on Intel platform   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Marek Vasut
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Marek Vasut
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH 1/1] usb: host: xhci-dwc3: add missing #ifdef CONFIG_PHY   Marek Vasut
• [U-Boot] [PATCH 1/1] usb: host: xhci-dwc3: add missing #ifdef CONFIG_PHY   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
• [U-Boot] [PATCH 1/1] dm: phy: add missing #ifdef CONFIG_PHY   Marek Vasut
• [U-Boot] [PATCH 1/1] dm: phy: add missing #ifdef CONFIG_PHY   Marek Vasut
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Marek Vasut
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   Marek Vasut
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Marek Vasut
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Marek Vasut
• [U-Boot] [PATCH] phy: add a NO-OP phy driver   Marek Vasut
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Marek Vasut
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Marek Vasut
• [U-Boot] [PATCH] usb: add dependency with generic PHY support   Marek Vasut
• [U-Boot] [PATCH] mmc: uniphier-sd: Fix long response processing   Marek Vasut
• [U-Boot] [PATCH] mtd: cfi: Zap CFI_FLASH_SHIFT_WIDTH redefinition   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: rmobile: Add PFC PUEN bank 5 address   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: rmobile: ulcb: Add ULCB board support   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Increase console buffer sizes   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: dts: rmobile: Import DTS from Linux 4.12   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: rmobile: Enable OF_CONTROL on RCar Gen3   Marek Vasut
• [U-Boot] [PATCH 1/3] clk: rmobile: Add RCar Gen3 clock driver   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: rmobile: Enable clock framework on Salvator-X   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: rmobile: Enable clock framework on ULCB   Marek Vasut
• [U-Boot] [PATCH] serial: sh: Convert to Kconfig   Marek Vasut
• [U-Boot] [PATCH] serial: sh: Use the clock framework to obtain clock config   Marek Vasut
• [U-Boot] [PATCH 1/3] net: ravb: Add OF probing support   Marek Vasut
• [U-Boot] [PATCH 2/3] net: ravb: Detect PHY correctly   Marek Vasut
• [U-Boot] [PATCH 3/3] net: ravb: Add clock handling support   Marek Vasut
• [U-Boot] [PATCH 1/3] mmc: sh_sdhi: Add DM and DT probing support   Marek Vasut
• [U-Boot] [PATCH 2/3] mmc: sh_sdhi: Fix the ACMD handling   Marek Vasut
• [U-Boot] [PATCH 3/3] mmc: sd_sdhi: Enable clock using clock framework   Marek Vasut
• [U-Boot] [PATCH 1/5] mmc: uniphier-sd: Factor out register IO   Marek Vasut
• [U-Boot] [PATCH 2/5] mmc: uniphier-sd: Add support for 64bit controller   Marek Vasut
• [U-Boot] [PATCH 3/5] mmc: uniphier-sd: Add support for 64bit FIFO   Marek Vasut
• [U-Boot] [PATCH 4/5] mmc: uniphier-sd: Add support for quirks   Marek Vasut
• [U-Boot] [PATCH 5/5] mmc: uniphier-sd: Add support for R8A7795 and R7A7796   Marek Vasut
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Marek Vasut
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Marek Vasut
• [U-Boot] [u-boot-denx-usb] Build break on current u-boot-usb master   Marek Vasut
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   Marek Vasut
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   Marek Vasut
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Marek Vasut
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Marek Vasut
• [U-Boot] [PATCH] zynq: fb_mmc: Correct cast of address to u32   Marek Vasut
• [U-Boot] [PATCH v2] phy: add a NO-OP phy driver   Marek Vasut
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Marek Vasut
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Marek Vasut
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Marek Vasut
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   Marek Vasut
• [U-Boot] [PATCH 0/2] Fix remaining errors and warning on u-boot-usb tree   Marek Vasut
• [U-Boot] [PATCH v13 0/8] Add Intel Arria 10 SoC FPGA driver   Marek Vasut
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable FPGA bridge in gen5 U-boot   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable FPGA bridge in gen5 U-boot   Marek Vasut
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   Marek Vasut
• [U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board configs   Marek Vasut
• [U-Boot] [PATCH 1/5] arm: socfpga: Add checking function on searching boot device   Marek Vasut
• [U-Boot] [PATCH 3/5] configs: socfpga: Add config for RBF loading from FAT fs   Marek Vasut
• [U-Boot] [PATCH 4/5] arm: socfpga: Add intermediate driver between flash and FPGA manager   Marek Vasut
• [U-Boot] [PATCH v4 00/17] nand: remove direct acces to nand_info array   Lokesh Vutla
• [U-Boot] [PATCH v4 00/17] nand: remove direct acces to nand_info array   Lokesh Vutla
• [U-Boot] USB power is not enabled fro BeagleBone Black   Lokesh Vutla
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Lokesh Vutla
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Lokesh Vutla
• [U-Boot] [PATCH 2/3] configs: dra7xx_evm: am57xx_evm: Enable DM_REGULATOR_PBIAS   Lokesh Vutla
• [U-Boot] [U-Boot,1/3] arm: omap: Detect boot mode very early   Lokesh Vutla
• [U-Boot] [PATCH] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Lokesh Vutla
• [U-Boot] [PATCH 1/2] board: ti: am57xx: Fix detection of board version   Lokesh Vutla
• [U-Boot] [PATCH 2/2] board: ti: x15: Add support for beagle_X15 revC   Lokesh Vutla
• [U-Boot] [PATCH] omap3: omap3_logic: Disable Falcon mode   Lokesh Vutla
• [U-Boot] [PATCH] arm: omap3: Detect boot mode very early   Lokesh Vutla
• [U-Boot] [PATCH] arm: mach-omap2: Align image address before cache operations   Lokesh Vutla
• [U-Boot] [PATCH 1/3] am43xx: Remove ethboot / usbhost_boot variants   Lokesh Vutla
• [U-Boot] [PATCH 2/3] am335x_hs_evm: Disable CONFIG_SPL_ENV_SUPPORT   Lokesh Vutla
• [U-Boot] [PATCH 3/3] ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HS   Lokesh Vutla
• [U-Boot] [RFC PATCH] Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig   Lokesh Vutla
• [U-Boot] [PATCH] dm: arm: ls1021a: Move to driver model for USB   Alison Wang
• [U-Boot] Targets with xHCI but without DM_USB   Alison Wang
• [U-Boot] [PATCH] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Alison Wang
• [U-Boot] [PATCH] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Alison Wang
• [U-Boot] [PATCH v2] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Alison Wang
• [U-Boot] [PATCH v2] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Alison Wang
• [U-Boot] [PATCH 1/8] armv8: Add workaround for USB erratum A-009008   Ran Wang
• [U-Boot] [PATCH 2/8] armv8: Add workaround for USB erratum A-009798   Ran Wang
• [U-Boot] [PATCH 3/8] armv8: Add workaround for USB erratum A-008997   Ran Wang
• [U-Boot] [PATCH 4/8] armv8: Add workaround for USB erratum A-009007   Ran Wang
• [U-Boot] [PATCH 5/8] armv7: Add workaround for USB erratum A-009008   Ran Wang
• [U-Boot] [PATCH 6/8] armv7: Add workaround for USB erratum A-009798   Ran Wang
• [U-Boot] [PATCH 7/8] armv7: Add workaround for USB erratum A-008997   Ran Wang
• [U-Boot] [PATCH 8/8] armv7: Add workaround for USB erratum A-009007   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] [PATCH] configs: Enable CONFIG_DM_USB for all ls1021atwr   Ran Wang
• [U-Boot] [PATCH] configs: Enable CONFIG_DM_USB for all ls1021atwr   Ran Wang
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   Stephen Warren
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   Stephen Warren
• [U-Boot] [PATCH] MAINTAINERS: drop bcm283x/rpi maintainership   Stephen Warren
• [U-Boot] [PATCH v5 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Stephen Warren
• [U-Boot] [PATCH 1/3] test/py: Handle the banner being printed after relocation   Stephen Warren
• [U-Boot] [PATCH 1/3] test/py: Handle the banner being printed after relocation   Stephen Warren
• [U-Boot] [PATCH 00/12] tegra: nyan-big: Support chainloading and add documentation   Tom Warren
• [U-Boot] [PATCH 10/10] gpt: harden set_gpt_info() against non NULL-terminated strings   Lothar Waßmann
• [U-Boot] [PATCH v6 3/3] GPT: provide commands to selectively rename partitions   Lothar Waßmann
• [U-Boot] [PATCH v8 8/10] GPT: read partition table from device into a data structure   Lothar Waßmann
• [U-Boot] [PATCH 3/5] fdt: Allow stacked overlays phandle references   Lothar Waßmann
• [U-Boot] [PATCH 5/5] fit: Introduce methods for applying overlays on fit-load   Lothar Waßmann
• [U-Boot] [PATCH] tools: buildman: prevent trying to use the working directory as build dorectory   Lothar Waßmann
• [U-Boot] [PATCH] dm: video: fix abuse of enum   Lothar Waßmann
• [U-Boot] Nios II 10m50 is not working   Lothar Waßmann
• [U-Boot] [PATCH] dm: video: fix abuse of enum   Lothar Waßmann
• [U-Boot] [PATCH] cmd, nand: fix broken output of "nand info"   Lothar Waßmann
• [U-Boot] [PATCH v6 4/5] drivers: phy: add generic_phy_valid() method   Lothar Waßmann
• [U-Boot] Warning due to commit 6a516ef15d79   Lothar Waßmann
• [U-Boot] [PATCH BUGFIX] net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH   Lothar Waßmann
• [U-Boot] [PATCH BUGFIX] net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH   Lothar Waßmann
• [U-Boot] [PATCH v2 BUGFIX] net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH   Lothar Waßmann
• [U-Boot] [PATCH] tools: buildman: prevent trying to use the working directory as build dorectory   Lothar Waßmann
• [U-Boot] [PATCH 1/1] mtd/spi: Support of non-jedec MRAM devices   Matt Weber
• [U-Boot] am335x uboot TFTP via SPL over usb is failing   Michael Welling
• [U-Boot] [PATCH v3 0/3] rockchip: firefly: Enabled the USB keyboard in the uboot   Leo Wen
• [U-Boot] [PATCH v3 1/3] rockchip: firefly: Add some macros to enable the   Leo Wen
• [U-Boot] [PATCH v3 2/3] rockchip: firefly: Add "usb start" to auto-start USB device   Leo Wen
• [U-Boot] [PATCH v3 3/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Leo Wen
• [U-Boot] [PATCH v4 0/3] rockchip: firefly: Enabled the USB keyboard in the uboot   Leo Wen
• [U-Boot] [PATCH v4 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Leo Wen
• [U-Boot] [PATCH v4 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Leo Wen
• [U-Boot] [PATCH v4 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Leo Wen
• [U-Boot] [PATCH v5 0/3] rockchip: firefly: Enabled the USB keyboard in the uboot   Leo Wen
• [U-Boot] [PATCH v5 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Leo Wen
• [U-Boot] [PATCH v5 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Leo Wen
• [U-Boot] [PATCH v5 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Leo Wen
• [U-Boot] [PATCH v6 0/3] rockchip: firefly: Enabled the USB keyboard in the uboot   Leo Wen
• [U-Boot] [PATCH v6 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   Leo Wen
• [U-Boot] [PATCH v6 2/3] rockchip: firefly: Set the environment variable 'usbkbd' to the stdin   Leo Wen
• [U-Boot] [PATCH v6 3/3] rockchip: firefly: Add "usb start" to auto-start USB device   Leo Wen
• [U-Boot] U-Boot image with multiple u-Boot dt blobs selected at low level boot   Oliver Westermann
• [U-Boot] [RFC PATCH 0/2] Add support for two modules from Laird   Ben Whitten
• [U-Boot] [RFC PATCH 1/2] board: laird: add WB45N CPU module   Ben Whitten
• [U-Boot] [RFC PATCH 2/2] board: laird: add WB50N CPU module   Ben Whitten
• [U-Boot] A80 (CubieBoard4) u-boot - what to inject in boot0 area?   Konrad Rzeszutek Wilk
• [U-Boot] A80 (CubieBoard4) u-boot - what to inject in boot0 area?   Konrad Rzeszutek Wilk
• [U-Boot] FIT image signing   Aaron Williams
• [U-Boot] FIT image signing   Aaron Williams
• [U-Boot] USB power is not enabled fro BeagleBone Black   Aaron Williams
• [U-Boot] OMAP35xx boards working on master?   Derald Woods
• [U-Boot] [PATCH] arm: omap: Fix 'get_device_type()' for OMAP34XX   Derald D. Woods
• [U-Boot] [PATCH v2] arm: omap: Fix 'get_device_type()' for OMAP34XX   Derald D. Woods
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   Bao Xiaowei
• [U-Boot] CONFIG_USB_EHCI_HCD breaks xHCI drivers even on DM   Masahiro Yamada
• [U-Boot] CONFIG_USB_EHCI_HCD breaks xHCI drivers even on DM   Masahiro Yamada
• [U-Boot] [PATCH] dm: include <dm/util.h> from drivers/core/util.c   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARM: uniphier: remove SPL support for ARMv8 SoCs   Masahiro Yamada
• [U-Boot] [PATCH 2/4] doc: uniphier: rework README.uniphier   Masahiro Yamada
• [U-Boot] [PATCH 3/4] ARM: uniphier: remove part number info from the boot log   Masahiro Yamada
• [U-Boot] [PATCH 4/4] ARM: uniphier: enable CONFIG_CMD_FS_GENERIC   Masahiro Yamada
• [U-Boot] [PATCH] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Masahiro Yamada
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH] dm: ofnode: change return type of dev_read_prop() to opaque pointer   Masahiro Yamada
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Masahiro Yamada
• [U-Boot] [PATCH 1/2] sandbox: remove os_putc() and os_puts()   Masahiro Yamada
• [U-Boot] [PATCH 2/2] console: simplify puts()   Masahiro Yamada
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH v7 0/5] Extend xhci-dwc3   Masahiro Yamada
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH v2] usb: fix usb_stor_read/write on DM   Masahiro Yamada
• [U-Boot] [PATCH v2 00/34] env: Move environment code to use location drivers   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARM: uniphier: remove SPL support for ARMv8 SoCs   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH 4/5] dm: ofnode: rename dev_read_prop() to dev_get_property()   Masahiro Yamada
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Andy Yan
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Andy Yan
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Andy Yan
• [U-Boot] [PATCH 0/5] fix the boot issue of Rockchip RK3036   Andy Yan
• [U-Boot] [PATCH 1/5] board_init.c: make the reserve functions as weak   Andy Yan
• [U-Boot] [PATCH v2 0/9] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Andy Yan
• [U-Boot] [PATCH v2 1/9] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Andy Yan
• [U-Boot] [PATCH v2 2/9] mips: spl and normal u-boot stage set SYS_MALLOC_F indepently   Andy Yan
• [U-Boot] [PATCH v2 3/9] powerpc: spl and normal u-boot stage set SYS_MALLOC_F indepently   Andy Yan
• [U-Boot] [PATCH v2 4/9] microblaze: spl and normal u-boot stage set SYS_MALLOC_F indepently   Andy Yan
• [U-Boot] [PATCH v2 5/9] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Andy Yan
• [U-Boot] [PATCH v2 6/9] rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036   Andy Yan
• [U-Boot] [PATCH v2 7/9] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Andy Yan
• [U-Boot] [PATCH v2 8/9] rockchip: use debug() instead of printf when back to bootrom   Andy Yan
• [U-Boot] [PATCH v2 9/9] rockchip: add u-boot specific dts for rk3036 sdk   Andy Yan
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Andy Yan
• [U-Boot] [PATCH 2/2] [rfc] support booting arm64 android image   Andy Yan
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Andy Yan
• [U-Boot] [PATCH 29/52] rockchip: rk3368: syscon: MSCH/PMUGRF/GRF support for OF_PLATDATA   Andy Yan
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Andy Yan
• [U-Boot] [PATCH 34/52] rockchip: clk: rk3368: support OF_PLATDATA for the RK3368 clk driver   Andy Yan
• [U-Boot] [PATCH 45/52] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Andy Yan
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Andy Yan
• [U-Boot] [PATCH 00/52] Support OF_PLATDATA in TPL, enable RK3368 DRAM init and add RK3368-uQ7   Andy Yan
• [U-Boot] [PATCH v3 00/10] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Andy Yan
• [U-Boot] [PATCH v3 01/10] make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN   Andy Yan
• [U-Boot] [PATCH v3 02/10] mips: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Andy Yan
• [U-Boot] [PATCH v3 03/10] powerpc: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Andy Yan
• [U-Boot] [PATCH v3 04/10] microblaze: spl and normal u-boot stage set SYS_MALLOC_F_LEN indepently   Andy Yan
• [U-Boot] [PATCH v3 05/10] sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation   Andy Yan
• [U-Boot] [PATCH v3 06/10] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board   Andy Yan
• [U-Boot] [PATCH v3 07/10] rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036   Andy Yan
• [U-Boot] [PATCH v3 08/10] rockchip: enable SPL_LIBGENERIC for rk3036 based boards   Andy Yan
• [U-Boot] [PATCH v3 09/10] rockchip: use puts instead of printf when back to bootrom   Andy Yan
• [U-Boot] [PATCH v3 10/10] rockchip: add u-boot specific dts for rk3036 sdk   Andy Yan
• [U-Boot] [PATCH v2 47/56] rockchip: dts: rk3368: add DMC node in rk3368.dtsi   Andy Yan
• [U-Boot] [PATCH] rockchip: dts: firefly using ddr3 1600   Kever Yang
• [U-Boot] [PATCH 1/4] rockchip: dts: correct vdd_log setting for firefly-rk3399   Kever Yang
• [U-Boot] [PATCH 2/4] power: pwm_regulator: fix the pwm_set_config parameter order   Kever Yang
• [U-Boot] [PATCH 3/4] power: pwm_regulator: remove redundance code   Kever Yang
• [U-Boot] [PATCH 4/4] rockchip: pwm: add mask for config setting   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399: correct the env setting   Kever Yang
• [U-Boot] [PATCH 0/5] rockchip: rk3229: add sdram and sd support   Kever Yang
• [U-Boot] [PATCH 1/5] rockchip: rk322x: update dram bank size   Kever Yang
• [U-Boot] [PATCH 2/5] rockchip: rk322x: add sdram driver   Kever Yang
• [U-Boot] [PATCH 3/5] rockchip: dts: rk322x: add sdmmc device node   Kever Yang
• [U-Boot] [PATCH 4/5] rockchip: rk322x: pinctrl: using compatible name same with dts   Kever Yang
• [U-Boot] [PATCH 5/5] rockchip: dts: rk3229: remove dram channel info   Kever Yang
• [U-Boot] [PATCH 30/52] rockchip: rk3368: grf: use shifted-constants and prefix with RK3368_   Kever Yang
• [U-Boot] [PATCH] rockchip: use UUID for root partitions   Kever Yang
• [U-Boot] [PATCH 2/5] rockchip: rk322x: add sdram driver   Kever Yang
• [U-Boot] [PATCH 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Kever Yang
• [U-Boot] [PATCH 2/4] rockchip: rk322x: update dts node for mmc   Kever Yang
• [U-Boot] [PATCH 3/4] rockchip: clk: update dwmmc clock div   Kever Yang
• [U-Boot] [PATCH 4/4] rockchip: clk: remove RATE_TO_DIV   Kever Yang
• [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes   Kever Yang
• [U-Boot] [U-Boot, 2/4] rockchip: rk322x: update dts node for mmc   Kever Yang
• [U-Boot] [U-Boot, 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Kever Yang
• [U-Boot] [U-Boot,3/4] rockchip: clk: update dwmmc clock div   Kever Yang
• [U-Boot] [PATCH v2 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Kever Yang
• [U-Boot] [PATCH v2 2/4] rockchip: rk322x: update max-frequency for mmc node   Kever Yang
• [U-Boot] [PATCH v2 3/4] rockchip: clk: update dwmmc clock div   Kever Yang
• [U-Boot] [PATCH v2 4/4] rockchip: clk: remove RATE_TO_DIV   Kever Yang
• [U-Boot] [RESENT PATCH v2 1/4] rockchip: rk322x: set the DDR region as non-secure in SPL   Kever Yang
• [U-Boot] [RESENT PATCH v2 2/4] rockchip: rk322x: update max-frequency for mmc node   Kever Yang
• [U-Boot] [RESENT PATCH v2 3/4] rockchip: clk: update dwmmc clock div   Kever Yang
• [U-Boot] [RESENT PATCH v2 4/4] rockchip: clk: remove RATE_TO_DIV   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3288: update the mmc number for fastboot   Kever Yang
• [U-Boot] [PATCH] rockchip: puma-rk3399: remove redudance code   Kever Yang
• [U-Boot] [RESENT PATCH] rockchip: puma-rk3399: remove redundance code   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: evb-rk3399: add ethaddr and serial# init   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: firefly-rk3399: enable EFUSE driver   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3288: update the mmc number for fastboot   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3288: fix EMMC_DIV_MASK definition in header   Kever Yang
• [U-Boot] [PATCH] mmc: fsl_esdhc: not always setting esdhc fdt status to okay   Li Yang
• [U-Boot] [RESEND PATCH 0/8] sf: improve support of (Q)SPI flash memories   Wenyou Yang
• [U-Boot] [RESEND PATCH 1/8] spi: add support of SPI flash commands   Wenyou Yang
• [U-Boot] [RESEND PATCH 2/8] sf: describe all SPI flash commands with 'struct spi_flash_command'   Wenyou Yang
• [U-Boot] [RESEND PATCH 3/8] sf: select the relevant SPI flash protocol for read and write commands   Wenyou Yang
• [U-Boot] [RESEND PATCH 4/8] sf: differentiate Page Program 1-1-4 and 1-4-4   Wenyou Yang
• [U-Boot] [RESEND PATCH 5/8] sf: add 'addr_len' member to 'struct spi_flash'   Wenyou Yang
• [U-Boot] [RESEND PATCH 6/8] sf: add new option to support SPI flash above 16MiB   Wenyou Yang
• [U-Boot] [RESEND PATCH 7/8] sf: add support to Microchip SST26 QSPI memories   Wenyou Yang
• [U-Boot] [RESEND PATCH 8/8] sf: add driver for Atmel QSPI controller   Wenyou Yang
• [U-Boot] [PATCH] clk: Kconfig: Add dependences of SPL_CLK   Wenyou Yang
• [U-Boot] [PATCH v2 0/8] sf: improve support of (Q)SPI flash memories   Wenyou Yang
• [U-Boot] [PATCH v2 1/8] spi: add support of SPI flash commands   Wenyou Yang
• [U-Boot] [PATCH v2 2/8] sf: describe all SPI flash commands with 'struct spi_flash_command'   Wenyou Yang
• [U-Boot] [PATCH v2 3/8] sf: select the relevant SPI flash protocol for read and write commands   Wenyou Yang
• [U-Boot] [PATCH v2 4/8] sf: differentiate Page Program 1-1-4 and 1-4-4   Wenyou Yang
• [U-Boot] [PATCH v2 5/8] sf: add 'addr_len' member to 'struct spi_flash'   Wenyou Yang
• [U-Boot] [PATCH v2 6/8] sf: add new option to support SPI flash above 16MiB   Wenyou Yang
• [U-Boot] [PATCH v2 7/8] sf: add support to Microchip SST26 QSPI memories   Wenyou Yang
• [U-Boot] [PATCH v2 8/8] sf: add driver for Atmel QSPI controller   Wenyou Yang
• [U-Boot] [PATCH 0/6] board: atmel: Add new board: SAMA5D27-SOM1-EK board.   Wenyou Yang
• [U-Boot] [PATCH 1/6] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Wenyou Yang
• [U-Boot] [PATCH 2/6] ARM: at91: spl: Add mck function to lower rate while switching   Wenyou Yang
• [U-Boot] [PATCH 3/6] ARM: at91: spl: Add boot device for boot from QSPI   Wenyou Yang
• [U-Boot] [PATCH 4/6] ARM: at91: mach: Add missing defines of MPDDRC   Wenyou Yang
• [U-Boot] [PATCH 5/6] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Wenyou Yang
• [U-Boot] [PATCH 6/6] board: atmel: Add SAMA5D27 SOM1 EK board   Wenyou Yang
• [U-Boot] [PATCH] board: sama5d2_xplained: Make SPL work on spiflash   Wenyou Yang
• [U-Boot] [PATCH] mtd: spi: sf_dataflash: Add print message while erase error   Wenyou Yang
• [U-Boot] [PATCH] board: at91sam9261ek: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH 0/3] board: atmel: Use SPI-flash-based AT45xxx DataFlash   Wenyou Yang
• [U-Boot] [PATCH 1/3] board: at91sam9263ek: Use SPI-flash-based AT45xxx DataFlash   Wenyou Yang
• [U-Boot] [PATCH 2/3] board: at91sam9rlek: Use SPI-flash-based AT45xxx DataFlash   Wenyou Yang
• [U-Boot] [PATCH 3/3] board: at91sam9260ek: Use SPI-flash-based AT45xxx DataFlash   Wenyou Yang
• [U-Boot] [PATCH] board: pm9263: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH] board: ethernut5: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH] board: pm9261: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH] board: meesc: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH] board: usb_a9263: Update to support DT and DM   Wenyou Yang
• [U-Boot] [PATCH v3 0/8] sf: improve support of (Q)SPI flash memories   Wenyou Yang
• [U-Boot] [PATCH v3 1/8] spi: add support of SPI flash commands   Wenyou Yang
• [U-Boot] [PATCH v3 2/8] sf: describe all SPI flash commands with 'struct spi_flash_command'   Wenyou Yang
• [U-Boot] [PATCH v3 3/8] sf: select the relevant SPI flash protocol for read and write commands   Wenyou Yang
• [U-Boot] [PATCH v3 4/8] sf: differentiate Page Program 1-1-4 and 1-4-4   Wenyou Yang
• [U-Boot] [PATCH v3 5/8] sf: add 'addr_len' member to 'struct spi_flash'   Wenyou Yang
• [U-Boot] [PATCH v3 6/8] sf: add new option to support SPI flash above 16MiB   Wenyou Yang
• [U-Boot] [PATCH v3 7/8] sf: add support to Microchip SST26 QSPI memories   Wenyou Yang
• [U-Boot] [PATCH v3 8/8] sf: add driver for Atmel QSPI controller   Wenyou Yang
• [U-Boot] [PATCH] mmc: gen_atmel_mci: Fix wrong arguments used of bind()   Wenyou Yang
• [U-Boot] [PATCH] configs: sama5d4_xplained: Fix input clock for debug UART   Wenyou Yang
• [U-Boot] [PATCH 0/2] board: atmel: Move code to set ethaddr under common directory   Wenyou Yang
• [U-Boot] [PATCH 1/2] board: sama5d2_xplained: Move setting ethaddr to common   Wenyou Yang
• [U-Boot] [PATCH 2/2] board: sama5d4_xplained: Set 'ethaddr' got from AT24MAC   Wenyou Yang
• [U-Boot] [PATCH] i2c: at91: Add missing probe function to device driver   Wenyou Yang
• [U-Boot] [PATCH 0/2] misc: i2c_eeprom: Add compatibles   Wenyou Yang
• [U-Boot] [PATCH 1/2] misc: i2c_eeprom: Add compatible for 24AA02E48   Wenyou Yang
• [U-Boot] [PATCH 2/2] misc: i2c_eeprom: Add compatible for AT24MAC402   Wenyou Yang
• [U-Boot] [PATCH v2 0/3] board: atmel: Set the ethernet mac address from eeprom   Wenyou Yang
• [U-Boot] [PATCH v2 1/3] board: atmel: Create board/$(VENDOR)/common folder   Wenyou Yang
• [U-Boot] [PATCH v2 2/3] board: sama5d2_xplained: Replace code to set mac address   Wenyou Yang
• [U-Boot] [PATCH v2 3/3] board: sama5d4_xplained: Set mac address from eeprom   Wenyou Yang
• [U-Boot] [PATCH 2/6] ARM: at91: spl: Add mck function to lower rate while switching   Yang, Wenyou
• [U-Boot] [PATCH 6/6] board: atmel: Add SAMA5D27 SOM1 EK board   Yang, Wenyou
• [U-Boot] [PATCH 0/7] board: atmel: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 1/7] lib: at91: Add logo files used by API from DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 2/7] atmel: common: Add function to display via DM_VIDEO's API   Wenyou Yang
• [U-Boot] [PATCH 3/7] board: sama5d2_xplained: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 4/7] board: sama5d3xek: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 5/7] board: sama5d4ek: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 6/7] board: sama5d4_xplained: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH 7/7] board: at91sam9x5ek: Convert to support DM_VIDEO   Wenyou Yang
• [U-Boot] [PATCH v2 0/6] board: atmel: Add new board SAMA5D27-SOM1-EK board.   Wenyou Yang
• [U-Boot] [PATCH v2 1/6] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Wenyou Yang
• [U-Boot] [PATCH v2 2/6] ARM: at91: spl: Add mck function to lower rate while switching   Wenyou Yang
• [U-Boot] [PATCH v2 3/6] ARM: at91: spl: Add boot device for boot from QSPI   Wenyou Yang
• [U-Boot] [PATCH v2 4/6] ARM: at91: mach: Add missing defines of MPDDRC   Wenyou Yang
• [U-Boot] [PATCH v2 5/6] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Wenyou Yang
• [U-Boot] [PATCH v2 6/6] board: atmel: Add SAMA5D27 SOM1 EK board   Wenyou Yang
• [U-Boot] [PATCH v2] clk: Kconfig: Add dependences of SPL_CLK   Wenyou Yang
• [U-Boot] [PATCH v3 0/8] sf: improve support of (Q)SPI flash memories   Yang, Wenyou
• [U-Boot] [PATCH 0/4] Allwinner A83T and Banana Pi M3 EMAC support   Icenowy Zheng
• [U-Boot] [PATCH 1/4] sun8i_emac: disable build of EPHY clock code on non-H3/H5 platforms   Icenowy Zheng
• [U-Boot] [PATCH 2/4] sun8i_emac: add support for setting EMAC TX/RX delay   Icenowy Zheng
• [U-Boot] [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Icenowy Zheng
• [U-Boot] [PATCH 4/4] sunxi: enable EMAC for Banana Pi M3 board   Icenowy Zheng
• [U-Boot] [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Icenowy Zheng
• [U-Boot] [linux-sunxi] Re: [PATCH 3/4] sunxi: add stub EMAC device node in A83T device tree   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: add MACPWR in Orange Pi PC2 defconfig   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: add MACPWR in Orange Pi PC2 defconfig   Icenowy Zheng
• [U-Boot] [PATCH 1/2] sunxi: add PRCM secure switch register definition   Icenowy Zheng
• [U-Boot] [PATCH 2/2] sunxi: switch PRCM to non-secure on H3/H5 SoCs   Icenowy Zheng
• [U-Boot] [PATCH] dm: video: fix abuse of enum   Marcel Ziswiler
• [U-Boot] [PATCH v3 00/35] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Marcel Ziswiler
• [U-Boot] [PATCH v4 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Marcel Ziswiler
• [U-Boot] [PATCH v4 18/20] dm: power: Convert as3722 to driver model   Marcel Ziswiler
• [U-Boot] [PATCH v4 00/20] dm: tegra: Move nyan-big, jetson-tk1, beaver to livetree   Marcel Ziswiler
• [U-Boot] [PATCH 0/2] move apalis t30/tk1, colibri t20/t30 to livetree   Marcel Ziswiler
• [U-Boot] [PATCH 1/2] apalis_t30: fix usb otg power enable   Marcel Ziswiler
• [U-Boot] [PATCH 2/2] dm: tegra: move apalis t30/tk1, colibri t20/t30 to livetree   Marcel Ziswiler
• [U-Boot] [PATCH 0/2] apalis t30/tk1, colibri t20/t30: clean-up i2c device tree nodes   Marcel Ziswiler
• [U-Boot] [PATCH 1/2] apalis-tk1: remove duplicate hdmi_ddc device tree node   Marcel Ziswiler
• [U-Boot] [PATCH 2/2] apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies   Marcel Ziswiler
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   Marc Zyngier
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   Marc Zyngier
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   icenowy at aosc.io
• [U-Boot] [linux-sunxi] [RFC PATCH 8/8] sunxi: enable PSCI for A83T SoC   icenowy at aosc.io
• [U-Boot] [PATCH 2/2] sunxi: switch PRCM to non-secure on H3/H5 SoCs   icenowy at aosc.io
• [U-Boot] [PATCH 0/2] Enable pxe boot for mx53cx9020   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH 1/2] imx: cx9020: use fdt_addr_r and ramdisk_addr_r   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH 2/2] imx: cx9020: try pxe boot, if no vmlinuz on mmc   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH] binman: Put our local modules ahead of system modules   sjg at google.com
• [U-Boot] [PATCH 11/11] dtoc: Add tests   sjg at google.com
• [U-Boot] [PATCH 09/11] dtoc: Add a comment about string replace in conv_name_to_c()   sjg at google.com
• [U-Boot] [PATCH 10/11] sandbox: Stop printing platdata at the start of SPL   sjg at google.com
• [U-Boot] [PATCH 08/11] dtoc: Move the main logic into the dtb_platdata file   sjg at google.com
• [U-Boot] [PATCH 07/11] dtoc: Move static functions out of the class   sjg at google.com
• [U-Boot] [PATCH 06/11] dtoc: Pass include_disabled explicitly   sjg at google.com
• [U-Boot] [PATCH] binman: Put our local modules ahead of system modules   sjg at google.com
• [U-Boot] [PATCH 11/11] dtoc: Add tests   sjg at google.com
• [U-Boot] [PATCH 10/11] sandbox: Stop printing platdata at the start of SPL   sjg at google.com
• [U-Boot] [PATCH 09/11] dtoc: Add a comment about string replace in conv_name_to_c()   sjg at google.com
• [U-Boot] [PATCH 07/11] dtoc: Move static functions out of the class   sjg at google.com
• [U-Boot] [PATCH 08/11] dtoc: Move the main logic into the dtb_platdata file   sjg at google.com
• [U-Boot] [PATCH 05/11] dtoc: Don't handle properties with / in them   sjg at google.com
• [U-Boot] [PATCH 06/11] dtoc: Pass include_disabled explicitly   sjg at google.com
• [U-Boot] [PATCH 03/11] dtoc: Split out the main class into its own file   sjg at google.com
• [U-Boot] [PATCH 04/11] dtoc: Fix pylint warnings   sjg at google.com
• [U-Boot] [PATCH 02/11] dtoc: Add a comment at the top   sjg at google.com
• [U-Boot] [PATCH 01/11] dtoc: Use self._options instead of the global options   sjg at google.com
• [U-Boot] [PATCH v4 1/6] display_options: Refactor to allow obtaining the banner   sjg at google.com
• [U-Boot] [PATCH 2/3] moveconfig: Allow control of which implying configs are shown   sjg at google.com
• [U-Boot] [PATCH 3/3] moveconfig: Allow automatic location and adding of 'imply'   sjg at google.com
• [U-Boot] [PATCH 1/3] moveconfig: Allow piping in 'git show --stat' output   sjg at google.com
• [U-Boot] [PATCH v3 5/6] sandbox: Enable more console options   sjg at google.com
• [U-Boot] [PATCH v3 6/6] sandbox: Drop special case console code for sandbox   sjg at google.com
• [U-Boot] [PATCH v3 4/6] console: Use map_sysmem() for the pre-relocation console   sjg at google.com
• [U-Boot] [PATCH v3 3/6] test: Add a test for snprintf() and the banner/version   sjg at google.com
• [U-Boot] [PATCH v3 2/6] Allow displaying the U-Boot banner on a video display   sjg at google.com
• [U-Boot] [PATCH] dm: ofnode: use fdt32_t for DT property value to fix sparse warning   sjg at google.com
• [U-Boot] [PATCH 5/5] dm: ofnode: simplify ofnode_read_bool()   sjg at google.com
• [U-Boot] [PATCH] dm: include <dm/util.h> from driver/core/dump.c   sjg at google.com
• [U-Boot] [PATCH 3/5] dm: ofnode: rename ofnode_read_prop() to ofnode_get_property()   sjg at google.com
• [U-Boot] [PATCH 2/5] dm: ofnode: simplify ofnode_read_prop()   sjg at google.com
• [U-Boot] [PATCH 1/5] dm: ofnode: use ofnode_read_bool() to check property existence   sjg at google.com
• [U-Boot] [PATCH] dm: include <dm/util.h> from drivers/core/util.c   sjg at google.com
• [U-Boot] [PATCH] fdt: Check for NULL return from fdt_getprop in 'fdt set'   sjg at google.com
• [U-Boot] [PATCH v3 33/35] fdtdec: Drop old compatible values   sjg at google.com
• [U-Boot] [PATCH v3 31/35] dm: serial: Add livetree support   sjg at google.com
• [U-Boot] [PATCH v3 32/35] tegra: Show a debug message if the LCD PMIC fails to start   sjg at google.com
• [U-Boot] [PATCH v3 30/35] dm: serial: Separate out the core serial-device finding code   sjg at google.com
• [U-Boot] [PATCH v3 29/35] dm: serial: ns16550: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 24/35] dm: tegra: mmc: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 25/35] dm: tegra: pci: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 23/35] dm: tegra: pwm: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 21/35] dm: tegra: spi: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 22/35] dm: tegra: i2c: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 20/35] dm: tegra: usb: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 19/35] dm: tegra: gpio: Convert to support livetree   sjg at google.com
• [U-Boot] [PATCH v3 17/35] dm: video: tegra124: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v3 18/35] tegra: dts: Move stdout-path to /chosen   sjg at google.com
• [U-Boot] [PATCH v3 15/35] dm: tegra: Convert USB setup to livetree   sjg at google.com
• [U-Boot] [PATCH v3 16/35] dm: tegra: Convert clock_decode_periph_id() to support livetree   sjg at google.com
• [U-Boot] [PATCH v3 14/35] tegra: tegra124: Add a PMC syscon driver   sjg at google.com
• [U-Boot] [PATCH v3 13/35] tegra: spl: Enable debug UART   sjg at google.com
• [U-Boot] [PATCH v3 12/35] tegra: Fix up include file ordering   sjg at google.com
• [U-Boot] [PATCH v3 11/35] video: simple-panel: Add a little more debugging   sjg at google.com
• [U-Boot] [PATCH v3 10/35] dm: video: Update pwm_backlight to support livetree   sjg at google.com
• [U-Boot] [PATCH v3 09/35] dm: video: Sync display on backspace   sjg at google.com
• [U-Boot] [PATCH v3 08/35] tegra: nyan-big: Enable bootstage   sjg at google.com
• [U-Boot] [PATCH v3 07/35] dm: Fix error handling when unflattening the DT   sjg at google.com
• [U-Boot] [PATCH v3 06/35] tegra: nyan-big: Enable the debug UART   sjg at google.com
• [U-Boot] [PATCH v3 05/35] tegra: video: Time the LCD init   sjg at google.com
• [U-Boot] [PATCH v3 03/35] dm: core: Add dev_read_enabled() to check if a device is enabled   sjg at google.com
• [U-Boot] [PATCH v3 04/35] dm: core: Add functions to obtain node's address/size cells   sjg at google.com
• [U-Boot] [PATCH v3 02/35] dm: core: Add dev_read_resource() to read device resources   sjg at google.com
• [U-Boot] [PATCH v3 01/35] dm: core: Add ofnode_read_string_count()   sjg at google.com
• [U-Boot] [PATCH v5 19/20] fdtdec: Drop old compatible values   sjg at google.com
• [U-Boot] [PATCH v5 20/20] dm: tegra: Move nyan-big, jetson-tk1/tx1, beaver to livetree   sjg at google.com
• [U-Boot] [PATCH v5 15/20] dm: tegra: pci: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 14/20] dm: tegra: mmc: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 13/20] dm: tegra: pwm: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 12/20] dm: tegra: i2c: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 11/20] dm: tegra: spi: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 10/20] dm: tegra: usb: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 09/20] dm: tegra: gpio: Convert to support livetree   sjg at google.com
• [U-Boot] [PATCH v5 08/20] tegra: dts: Move stdout-path to /chosen   sjg at google.com
• [U-Boot] [PATCH v5 07/20] dm: video: tegra124: Convert to livetree   sjg at google.com
• [U-Boot] [PATCH v5 06/20] dm: tegra: Convert clock_decode_periph_id() to support livetree   sjg at google.com
• [U-Boot] [PATCH v5 05/20] dm: tegra: Convert USB setup to livetree   sjg at google.com
• [U-Boot] [PATCH v5 04/20] tegra: tegra124: Add a PMC syscon driver   sjg at google.com
• [U-Boot] [PATCH v5 02/20] dm: core: Fix up ofnode_get_addr_index() for 64-bit values   sjg at google.com
• [U-Boot] [PATCH v5 03/20] tegra: spl: Enable debug UART   sjg at google.com
• [U-Boot] [PATCH v5 01/20] dm: core: Add ofnode_read_resource()   sjg at google.com
• [U-Boot] [PATCH 1/2] sandbox: remove os_putc() and os_puts()   sjg at google.com
• [U-Boot] [PATCH] dm: ofnode: change return type of dev_read_prop() to opaque pointer   sjg at google.com
• [U-Boot] [PATCH] dm: Fix typo in include-guard for dm-structs.h   sjg at google.com
• [U-Boot] [PATCH 3/3] cmd: scsi: Fix null pointer dereference in 'scsi reset'   sjg at google.com
• [U-Boot] [PATCH 2/3] dm: ahci: Avoid scsi_scan_dev() in ahci_probe_scsi()   sjg at google.com
• [U-Boot] [PATCH v11 0/6] Add Intel Arria 10 SoC FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 0/6] Add Intel Arria 10 SoC FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 1/6] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 2/6] arm: socfpga: Restructure FPGA driver in the preparation to support A10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 3/6] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 4/6] kconfig: Convert FPGA_SOCFPGA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 5/6] drivers: Enable FPGA driver build on SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v11 6/6] arm: socfpga: Add FPGA driver support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 1/8] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 2/8] arm: socfpga: Restructure FPGA driver in the preparation to support A10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 3/8] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 4/8] kconfig: Convert FPGA_SOCFPGA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 5/8] drivers: Enable FPGA driver build on SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 6/8] configs: Add FPGA driver config for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 7/8] arm: socfpga: Add FPGA driver support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 8/8] arm: socfpga: Enable all FPGA config support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 1/8] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 2/8] arm: socfpga: Restructure FPGA driver in the preparation to support A10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 3/8] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 4/8] kconfig: Convert FPGA_SOCFPGA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 5/8] drivers: Enable FPGA driver build on SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 6/8] configs: Add FPGA driver config for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 7/8] arm: socfpga: Add FPGA driver support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v12 8/8] arm: socfpga: Enable all FPGA config support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 0/8] Add Intel Arria 10 SoC FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 1/8] arm: socfpga: Remove unused passing parameter of socfpga_bridges_reset   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 2/8] arm: socfpga: Restructure FPGA driver in the preparation to support A10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 3/8] kconfig: Convert FPGA and FPGA_ALTERA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 4/8] kconfig: Convert FPGA_SOCFPGA configuration to Kconfig   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 5/8] drivers: Enable FPGA driver build on SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 6/8] configs: Add FPGA driver config for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 7/8] arm: socfpga: Add FPGA driver support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 8/8] arm: socfpga: Enable all FPGA config support for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH 0/3] Remove unused FPGA feature from gen5 SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/3] arm: socfpga: Remove unused FPGA feature from gen5 SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/3] arm: socfpga: Move Gen5 FPGA manager driver to FPGA driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable FPGA bridge in gen5 U-boot   tien.fong.chee at intel.com
• [U-Boot] [PATCH 0/5] Add intermediate driver(cff driver) between flash & FPGA   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/5] arm: socfpga: Add checking function on searching boot device   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/5] arm: socfpga: Add checking function on FPGA setting in FDT   tien.fong.chee at intel.com
• [U-Boot] [PATCH 3/5] configs: socfpga: Add config for RBF loading from FAT fs   tien.fong.chee at intel.com
• [U-Boot] [PATCH 4/5] arm: socfpga: Add intermediate driver between flash and FPGA manager   tien.fong.chee at intel.com
• [U-Boot] [PATCH 5/5] arm: socfpga: Enable cff driver build   tien.fong.chee at intel.com
• [U-Boot] [PATCH v3 2/3] rockchip: firefly: Add "usb start" to auto-start USB device   leo
• [U-Boot] [PATCH v5 1/3] rockchip: firefly: Add some macros to enable the usb keyboard   leo
• [U-Boot] [PATCH v2 1/1] efi_loader: initalize EFI object list only once   Heinrich at lists.denx.de
• [U-Boot] [PATCH v1] watchdog: Introduce watchdog driver for Intel Tangier   lukma
• [U-Boot] [PATCH v6] mmc: gen_atmel_mci: add driver model support for mci   Wenyou.Yang at microchip.com
• [U-Boot] [PATCH 4/5] efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD   Wenyou.Yang at microchip.com
• [U-Boot] [RESEND PATCH 0/8] sf: improve support of (Q)SPI flash memories   Wenyou.Yang at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] [PATCH v2] Add support for Microchip LAN75xx and LAN78xx   Yuiko.Oshino at microchip.com
• [U-Boot] Sinovoip M2+ defconfig   krichy at nmdps.net
• [U-Boot] Sinovoip Bananapi M1+ defconfig   krichy at nmdps.net
• [U-Boot] [PATCH] Added configs/Sinovoip_BPI_M1_plus_defconfig   krichy at nmdps.net
• [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds   yinbo.zhu at nxp.com
• [U-Boot] [PATCH v8 8/10] GPT: read partition table from device into a data structure   alison at peloton-tech.com
• [U-Boot] [PATCH 09/10] GPT: provide commands to selectively rename partitions   alison at peloton-tech.com
• [U-Boot] [PATCH 10/10] gpt: harden set_gpt_info() against non NULL-terminated strings   alison at peloton-tech.com
• [U-Boot] [PATCH v8 08/10] GPT: read partition table from device into a data structure   alison at peloton-tech.com
• [U-Boot] [PATCH v8 09/10] GPT: provide commands to selectively rename partitions   alison at peloton-tech.com
• [U-Boot] [PATCH v2 10/10] gpt: harden set_gpt_info() against non NULL-terminated strings   alison at peloton-tech.com
• [U-Boot] Converting device model driver to use it for older uboot versions   raghav
• [U-Boot] [PATCH 03/16] usb: Remove unnecessary work in usb_setup_descriptor()   stefan.bruens at rwth-aachen.de
• [U-Boot] [PATCH 5/5] fit: Introduce methods for applying overlays on fit-load   stefan.bruens at rwth-aachen.de
• [U-Boot] [PATCH] tools/env: fix allocation of the lock file name in fw_printenv   sgerwk
• [U-Boot] [PATCH] tools/env: fix allocation of the lock file name in fw_printenv   sgerwk
• [U-Boot] [PATCH] tools/env: fix allocation of the lock file name in fw_printenv   sgerwk
• [U-Boot] Does U-boot allow snapshot restoration?   shiwen
• [U-Boot] [PATCH v12 0/8] Add Intel Arria 10 SoC FPGA driver   chee skywind
• [U-Boot] USB power is not enabled fro BeagleBone Black   sm
• [U-Boot] [PATCH 1/1] mtd: stm32: use parameter instead of default value   patrice.chotard at st.com
• [U-Boot] [PATCH v10 00/10] usb: Extend ehci and ohci generic driver   patrice.chotard at st.com
• [U-Boot] [PATCH v10 01/10] reset: add reset_request()   patrice.chotard at st.com
• [U-Boot] [PATCH v10 02/10] reset: add reset_release_all()   patrice.chotard at st.com
• [U-Boot] [PATCH v10 03/10] clk: add clk_release_all()   patrice.chotard at st.com
• [U-Boot] [PATCH v10 04/10] dm: core: add ofnode_count_phandle_with_args()   patrice.chotard at st.com
• [U-Boot] [PATCH v10 05/10] usb: host: ehci-generic: replace printf() by error()   patrice.chotard at st.com
• [U-Boot] [PATCH v10 06/10] usb: host: ehci-generic: add error path and .remove callback   patrice.chotard at st.com
• [U-Boot] [PATCH v10 07/10] usb: host: ehci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH v10 08/10] usb: host: ohci-generic: add CLOCK support   patrice.chotard at st.com
• [U-Boot] [PATCH v10 09/10] usb: host: ohci-generic: add RESET support   patrice.chotard at st.com
• [U-Boot] [PATCH v10 10/10] usb: host: ohci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 0/5] Extend xhci-dwc3   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 1/5] usb: host: xhci-dwc3: Convert driver to DM   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 2/5] usb: host: xhci-dwc3: Add dual role mode support from DT   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 3/5] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 4/5] drivers: phy: add generic_phy_valid() method   patrice.chotard at st.com
• [U-Boot] [RESEND][PATCH v5 5/5] usb: host: xhci-dwc3: Add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH v6 0/5] Extend xhci-dwc3   patrice.chotard at st.com
• [U-Boot] [PATCH v6 1/5] usb: host: xhci-dwc3: Convert driver to DM   patrice.chotard at st.com
• [U-Boot] [PATCH v6 2/5] usb: host: xhci-dwc3: Add dual role mode support from DT   patrice.chotard at st.com
• [U-Boot] [PATCH v6 3/5] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails   patrice.chotard at st.com
• [U-Boot] [PATCH v6 4/5] drivers: phy: add generic_phy_valid() method   patrice.chotard at st.com
• [U-Boot] [PATCH v6 5/5] usb: host: xhci-dwc3: Add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH 0/6] Extend stm32 SDRAM driver   patrice.chotard at st.com
• [U-Boot] [PATCH 1/6] ram: stm32: migrate fmc defines in driver file   patrice.chotard at st.com
• [U-Boot] [PATCH 2/6] ram: stm32: get base address from DT   patrice.chotard at st.com
• [U-Boot] [PATCH 3/6] ram: stm32: replace fdtdec_get by ofnode calls   patrice.chotard at st.com
• [U-Boot] [PATCH 4/6] ram: stm32: add second SDRAM bank management   patrice.chotard at st.com
• [U-Boot] [PATCH 5/6] ARM: DTS: stm32: remove useless mr-nbanks property   patrice.chotard at st.com
• [U-Boot] [PATCH 6/6] ram: stm32: add stm32h7 support   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] mmc: Add MMC support for stm32h7 Socs   patrice.chotard at st.com
• [U-Boot] [PATCH 0/9] stm32f7 clock improvements   patrice.chotard at st.com
• [U-Boot] [PATCH 1/9] ARM: DTS: stm32: align DT clock declaration with kernel   patrice.chotard at st.com
• [U-Boot] [PATCH 2/9] clk: stm32f7: add static for configure_clocks()   patrice.chotard at st.com
• [U-Boot] [PATCH 3/9] clk: stm32f7: get RCC base address from DT   patrice.chotard at st.com
• [U-Boot] [PATCH 4/9] clk: stm32f7: add clock .get_rate() callback   patrice.chotard at st.com
• [U-Boot] [PATCH 5/9] clk: stm32f7: cleanup clocks unused definitions   patrice.chotard at st.com
• [U-Boot] [PATCH 6/9] serial: stm32x7: migrate serial struct to driver   patrice.chotard at st.com
• [U-Boot] [PATCH 7/9] serial: stm32x7: add clk_get_rate() support   patrice.chotard at st.com
• [U-Boot] [PATCH 8/9] spi: stm32_qspi: add clk_get_rate() support   patrice.chotard at st.com
• [U-Boot] [PATCH 9/9] clk: stm32f7: remove clock_get()   patrice.chotard at st.com
• [U-Boot] [PATCH v7 0/5] Extend xhci-dwc3   patrice.chotard at st.com
• [U-Boot] [PATCH v7 1/5] usb: host: xhci-dwc3: Convert driver to DM   patrice.chotard at st.com
• [U-Boot] [PATCH v7 2/5] usb: host: xhci-dwc3: Add dual role mode support from DT   patrice.chotard at st.com
• [U-Boot] [PATCH v7 3/5] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails   patrice.chotard at st.com
• [U-Boot] [PATCH v7 4/5] drivers: phy: add generic_phy_valid() method   patrice.chotard at st.com
• [U-Boot] [PATCH v7 5/5] usb: host: xhci-dwc3: Add generic PHY support   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 00/10] usb: Extend ehci and ohci generic driver   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 01/10] reset: add reset_request()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 02/10] reset: add reset_release_all()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 03/10] clk: add clk_release_all()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 04/10] dm: core: add ofnode_count_phandle_with_args()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 05/10] usb: host: ehci-generic: replace printf() by error()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 06/10] usb: host: ehci-generic: add error path and .remove callback   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 07/10] usb: host: ehci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 08/10] usb: host: ohci-generic: add CLOCK support   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 09/10] usb: host: ohci-generic: add RESET support   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH v10 10/10] usb: host: ohci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH v9 00/10] STiH410-B2260: add reset, usb and fastboot support   patrice.chotard at st.com
• [U-Boot] [PATCH v9 01/10] mmc: sti_sdhci: Rework sti_mmc_core_config()   patrice.chotard at st.com
• [U-Boot] [PATCH v9 02/10] ARM: dts: stih410-family: Add missing reset_names for mmc1 node   patrice.chotard at st.com
• [U-Boot] [PATCH v9 03/10] mmc: sti_sdhci: Use reset framework   patrice.chotard at st.com
• [U-Boot] [PATCH v9 04/10] usb: phy: Add STi USB2 PHY   patrice.chotard at st.com
• [U-Boot] [PATCH v9 05/10] STiH410-B2260: enable USB Host Networking   patrice.chotard at st.com
• [U-Boot] [PATCH v9 06/10] STiH410-B2260: enable USB, fastboot, reset, PHY related flags   patrice.chotard at st.com
• [U-Boot] [PATCH v9 07/10] usb: dwc3: Add dwc3 glue driver support for STi   patrice.chotard at st.com
• [U-Boot] [PATCH v9 08/10] ARM: dts: STiH410: set DWC3 dual role mode to peripheral   patrice.chotard at st.com
• [U-Boot] [PATCH v9 09/10] ARM: dts: STiH410: update ehci and ohci compatible   patrice.chotard at st.com
• [U-Boot] [PATCH v9 10/10] board: STiH410-B2260: add fastboot support   patrice.chotard at st.com
• [U-Boot] [PATCH v2 0/6] Extend stm32 SDRAM driver   patrice.chotard at st.com
• [U-Boot] [PATCH v2 1/6] ram: stm32: migrate fmc defines in driver file   patrice.chotard at st.com
• [U-Boot] [PATCH v2 2/6] ram: stm32: get base address from DT   patrice.chotard at st.com
• [U-Boot] [PATCH v2 3/6] ram: stm32: replace fdtdec_get by ofnode calls   patrice.chotard at st.com
• [U-Boot] [PATCH v2 4/6] ram: stm32: add second SDRAM bank management   patrice.chotard at st.com
• [U-Boot] [PATCH v2 5/6] ARM: DTS: stm32: remove useless mr-nbanks property   patrice.chotard at st.com
• [U-Boot] [PATCH v2 6/6] ram: stm32: add stm32h7 support   patrice.chotard at st.com
• [U-Boot] [PATCH v2 1/1] mmc: Add MMC support for stm32h7 Socs   patrice.chotard at st.com
• [U-Boot] [PATCH v3 1/1] mmc: Add MMC support for stm32h7 Socs   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] usb: host: xhci-dwc3: add missing #ifdef CONFIG_PHY   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] dm: phy: add missing #ifdef CONFIG_PHY   patrice.chotard at st.com
• [U-Boot] [PATCH v8 0/6] Extend xhci-dwc3   patrice.chotard at st.com
• [U-Boot] [PATCH v8 1/6] usb: host: xhci-dwc3: Convert driver to DM   patrice.chotard at st.com
• [U-Boot] [PATCH v8 2/6] usb: host: xhci-dwc3: Add dual role mode support from DT   patrice.chotard at st.com
• [U-Boot] [PATCH v8 3/6] drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails   patrice.chotard at st.com
• [U-Boot] [PATCH v8 4/6] drivers: phy: add generic_phy_valid() method   patrice.chotard at st.com
• [U-Boot] [PATCH v8 5/6] dm: phy: add PHY stub function   patrice.chotard at st.com
• [U-Boot] [PATCH v8 6/6] usb: host: xhci-dwc3: Add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH v11 00/10] usb: Extend ehci and ohci generic driver   patrice.chotard at st.com
• [U-Boot] [PATCH v11 01/10] reset: add reset_request()   patrice.chotard at st.com
• [U-Boot] [PATCH v11 02/10] reset: add reset_release_all()   patrice.chotard at st.com
• [U-Boot] [PATCH v11 03/10] clk: add clk_release_all()   patrice.chotard at st.com
• [U-Boot] [PATCH v11 04/10] dm: core: add ofnode_count_phandle_with_args()   patrice.chotard at st.com
• [U-Boot] [PATCH v11 05/10] usb: host: ehci-generic: replace printf() by error()   patrice.chotard at st.com
• [U-Boot] [PATCH v11 06/10] usb: host: ehci-generic: add error path and .remove callback   patrice.chotard at st.com
• [U-Boot] [PATCH v11 07/10] usb: host: ehci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH v11 08/10] usb: host: ohci-generic: add CLOCK support   patrice.chotard at st.com
• [U-Boot] [PATCH v11 09/10] usb: host: ohci-generic: add RESET support   patrice.chotard at st.com
• [U-Boot] [PATCH v11 10/10] usb: host: ohci-generic: add generic PHY support   patrice.chotard at st.com
• [U-Boot] [PATCH 0/4] Fix compile failure encountered on u-boot-usb tree (2017-07-20)   patrice.chotard at st.com
• [U-Boot] [PATCH 1/4] dm: phy: add missing #ifdef CONFIG_PHY   patrice.chotard at st.com
• [U-Boot] [PATCH 2/4] dm: usb: host: xhci-dwc3: add missing #ifdef CONFIG_DM_USB   patrice.chotard at st.com
• [U-Boot] [PATCH 3/4] usb: host: ehci-generic: initialize PHY only when found   patrice.chotard at st.com
• [U-Boot] [PATCH 4/4] usb: host: ohci-generic: initialize PHY only when found   patrice.chotard at st.com
• [U-Boot] [PATCH 0/2] Fix remaining errors and warning on u-boot-usb tree   patrice.chotard at st.com
• [U-Boot] [PATCH 1/2] usb: host: xhci-dxc3: fix compilation warnings   patrice.chotard at st.com
• [U-Boot] [PATCH 2/2] clk: fix compilation errors for poplar platform   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] i2c: add i2c driver for stm32   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] stmf32f4: soc: fix buildman compilation error   patrice.chotard at st.com
• [U-Boot] [PATCH v2 1/1] stmf32f4: soc: fix buildman compilation error   patrice.chotard at st.com
• [U-Boot] [RFC PATCH 1/1] dm: core: add clocks node scan   patrice.chotard at st.com
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   xiaowei.bao
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   xiaowei.bao
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   xiaowei.bao
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   xiaowei.bao
• [U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts   xiaowei.bao
• [U-Boot] Adding Debug Symbol To U-Boot   yyurtcan
• [U-Boot] Adding Debug Symbol To U-Boot   yyurtcan
• [U-Boot] How to Enable POST Tests   yyurtcan
• [U-Boot] Fwd: [PATCH 1/1] gpio: pca953x: Fix support chips with 24 GPIOs   Максим Паймушкин
• [U-Boot] Does U-boot allow snapshot restoration?   张释文