[U-Boot] [PATCH v2 29/56] rockchip: rk3368: grf: use shifted-constants

Simon Glass sjg at chromium.org
Fri Jul 28 03:38:37 UTC 2017


Hi Philipp,

On 26 July 2017 at 04:40, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> The RK3368 GRF header was still defines with a shifted-mask but with
> non-shifted function selectors for the IOMUX defines.  As the RK3368
> support is still fresh enough to allow a quick change, we do this now
> before having more code use this.
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>
> ---
>
> Changes in v2:
> - dropped the RK3368_ prefix for the GRF constants
>
>  arch/arm/include/asm/arch-rockchip/grf_rk3368.h | 441 ++++++++++++------------
>  drivers/pinctrl/rockchip/pinctrl_rk3368.c       |   9 +-
>  2 files changed, 226 insertions(+), 224 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h
> index a438f5d..1966960 100644
> --- a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h
> +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h
> @@ -1,4 +1,6 @@
> -/* (C) Copyright 2016 Rockchip Electronics Co., Ltd
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
>   *
>   * SPDX-License-Identifier:     GPL-2.0+
>   */
> @@ -100,315 +102,318 @@ check_member(rk3368_pmu_grf, os_reg[0], 0x200);
>
>  /*GRF_GPIO0C_IOMUX*/
>  enum {
> -       GPIO0C7_SHIFT           = 14,
> -       GPIO0C7_MASK            = 3 << GPIO0C7_SHIFT,
> -       GPIO0C7_GPIO            = 0,
> -       GPIO0C7_LCDC_D19,
> -       GPIO0C7_TRACE_D9,
> -       GPIO0C7_UART1_RTSN,
> -
> -       GPIO0C6_SHIFT           = 12,
> -       GPIO0C6_MASK            = 3 << GPIO0C6_SHIFT,
> +       GPIO0C7_MASK           = GENMASK(15, 14),
> +       GPIO0C7_GPIO           = 0,
> +       GPIO0C7_LCDC_D19        = (1 << 14),
> +       GPIO0C7_TRACE_D9        = (2 << 14),
> +       GPIO0C7_UART1_RTSN      = (3 << 14),

Can we keep the SHIFT macros so we(e.g.) don't have to open-code the
'14' each time?


More information about the U-Boot mailing list