[U-Boot] [PATCH v3 0/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

[Gautam Bhat]

This change sets the VLDO4 settings output to 2.8V in PMIC
initialization. I accidentally noticed this when I was testing
the DSI voltage input which was 3.3V. Not setting the proper voltage
can harm some of the voltage sensitive peripheral.

Changes in v3:
- Used pmic_clrsetbits for consistency.

Gautam Bhat (1):
  Set VLD04 output to 2.8V in PMIC initialization.

 board/freescale/mx7dsabresd/mx7dsabresd.c | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
2.11.0