[U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files

[Bin Meng]

Hi Felipe,

On Thu, Jul 6, 2017 at 7:33 PM, Felipe Balbi
<felipe.balbi at linux.intel.com> wrote:
>
> Hi,
>
> Andy Shevchenko <andriy.shevchenko at linux.intel.com> writes:
>> On Thu, 2017-07-06 at 12:44 +0300, Andy Shevchenko wrote:
>>> On Thu, 2017-07-06 at 12:07 +0800, Bin Meng wrote:
>>> > Hi Andy,
>>> >
>>> > On Thu, Jul 6, 2017 at 4:56 AM, Andy Shevchenko
>>> > <andriy.shevchenko at linux.intel.com> wrote:
>>> > > Add Intel Edison board which is using U-Boot.
>>
>>> > > +config SYS_USB_OTG_BASE
>>> > > +       hex
>>> > > +       default 0xf9100000
>>> >
>>> > Can this otg controller be put into device tree, like other
>>> > peripherals?
>>>
>>> I will check the possibility.
>>
>> Is it show stopper? To keep things simpler it would be better to keep
>> board initialization in place and move forward later.
>>
>> Felipe, what is your opinion on the topic?
>
> IIRC, there are some folks working on moving DWC3 to DM. Frankly, I
> would rather not wait for the conversion before merging Edison's
> board-file. After the driver is switched to DM, adding another node on
> DT isn't really a lot of work by any stretch of the imagination.

Thanks for the clarification.

Regards,
Bin