[U-Boot] [PATCH v3 1/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

[Fabio Estevam]

On Sun, Jul 2, 2017 at 4:20 PM, Gautam Bhat <mindentropy at gmail.com> wrote:
> This change sets the VLDO4 settings output to 2.8V in PMIC
> initialization so that the MIPI DSI/CSI input voltage is 2.8V
> as per the schematics. The original code provides an output of
> 3.3V which violates the voltage mentioned in the schematics.
>
> Signed-off-by: Gautam Bhat <mindentropy at gmail.com>

Acked-by: Fabio Estevam <fabio.estevam at nxp.com>