[U-Boot] [PATCH v3 1/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

[Stefano Babic]

On 03/07/2017 00:09, Fabio Estevam wrote:
> On Sun, Jul 2, 2017 at 4:20 PM, Gautam Bhat <mindentropy at gmail.com> wrote:
>> This change sets the VLDO4 settings output to 2.8V in PMIC
>> initialization so that the MIPI DSI/CSI input voltage is 2.8V
>> as per the schematics. The original code provides an output of
>> 3.3V which violates the voltage mentioned in the schematics.
>>
>> Signed-off-by: Gautam Bhat <mindentropy at gmail.com>
> 
> Acked-by: Fabio Estevam <fabio.estevam at nxp.com>
> 

Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================