[U-Boot] [PATCH v7 0/5] Extend xhci-dwc3

[Masahiro Yamada]

Hi.


2017-07-18 18:40 GMT+09:00 Marek Vasut <marex at denx.de>:
> On 07/18/2017 11:38 AM, patrice.chotard at st.com wrote:
>> From: Patrice Chotard <patrice.chotard at st.com>
>>
>> This series extend xhci-dwc3.c drivers by :
>>       _ converting it to DM model,
>>       _ adding dual role mode support from DT
>>       _ adding new generic_phy_valid() method in PHY framework
>>       _ adding support of generic PHY framework
>>
>>
>> v7:   _ add Reviewed-by in patch 1
>>       _ declare bool generic_phy_valid(struct phy *phy) as static inline in
>>         patch 4
>> v6:   _ remove useless struct xhci_dwc3 in patch 1
>> v5:   _ rebase on top of dm/master in order to use the last livetree update
>>       _ replace dev_get_addr() by devfdt_get_addr() in patch 1
>> v4:   _ set phy->dev to NULL in case of generic_phy_get_by_index()
>> v3:   _ introduce generic_phy_valid() method
>>       _ add Reviewed-by
>> v2:   _ use dev_get_addr() in PATCH 1 and removed useless piece of code
>>
>> Patrice Chotard (5):
>>   usb: host: xhci-dwc3: Convert driver to DM
>>   usb: host: xhci-dwc3: Add dual role mode support from DT
>>   drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index()
>>     fails
>>   drivers: phy: add generic_phy_valid() method
>>   usb: host: xhci-dwc3: Add generic PHY support
>>
>>  drivers/phy/phy-uclass.c     |  1 +
>>  drivers/usb/host/xhci-dwc3.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
>>  include/generic-phy.h        | 11 ++++++
>>  3 files changed, 99 insertions(+)
>>
> Applied all, thanks.
>
> --


I tried to convert xhci-dwc3.c into a DM driver one year before:
http://patchwork.ozlabs.org/patch/622563/

After our discussion,
a problem was duplication between
drivers/usb/host/xhci-dwc3.c and drivers/usb/dwc3/.

I has been too busy to track this work, but
was that problem solved?

How will glue-layers work?


-- 
Best Regards
Masahiro Yamada