[U-Boot] [PATCH v2 31/56] rockchip: pinctrl: rk3368: add support for configuring the MMC pins

[Simon Glass]

On 26 July 2017 at 04:40, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> The RK3368 has two SD/MMC controllers that can be used from U-Boot
> both during SPL and for booting an OS from the full bootloader stage.
> While both are configured to (mostly) sensible settings from the BROM,
> additional configuration for the MMC controller is needed to configure
> it to 8bit mode.
>
> This adds pinctrl support for the MMC controller.
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>
> ---
>
> Changes in v2:
> - removed the RK3368 prefix on the SD/MMC pin definitions
>
>  drivers/pinctrl/rockchip/pinctrl_rk3368.c | 48 +++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)

Reviewed-by: Simon Glass <sjg at chromium.org>