[U-Boot] [PATCH] omap3: omap3_logic: Disable Falcon mode

[Adam Ford]

On Mon, Jul 17, 2017 at 9:53 AM, Lokesh Vutla <lokeshvutla at ti.com> wrote:
>
>
> On 7/17/2017 5:29 PM, Adam Ford wrote:
>> Now that Falcon mode supports zImages, any attempts to load
>> from NAND fail, since the system assumes it's Falcon booting.
>
> yeah, when it fails loading zImage, it will fallback to loading u-boot.
> Is that not the behaviour?
>
>> The Micron Flash needs to be unlocked which isn't yet supported in
>> Falcon mode, so we need to disable it until its ready.
>
> So, falcon mode tries to load zImage form the same boot mode which you
> are currently booting from. Why is this a special case for FALCON boot
> and not for normal u-boot loading?

You're correct.  I think something else was wrong.  I reset my git
repo with origin/master and I don't appear to need this.

>
> Thanks and regards,
> Lokesh
>
>>

Sorry for the noise.  Please disregard this patch request.

adam
>> Signed-off-by: Adam Ford <aford173 at gmail.com>
>>
>> diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
>> index f897803..0fe753d 100644
>> --- a/include/configs/omap3_logic.h
>> +++ b/include/configs/omap3_logic.h
>> @@ -16,6 +16,7 @@
>>  #define CONFIG_NR_DRAM_BANKS 2       /* CS1 may or may not be populated */
>>
>>  #include <configs/ti_omap3_common.h>
>> +#undef CONFIG_SPL_OS_BOOT
>>
>>  #ifdef CONFIG_SPL_BUILD
>>  /*
>>