[U-Boot] [RFC PATCH] OMAP2PLUS boards' CONFIG_SYS_LOAD_ADDR to Kconfig

[Adam Ford]

ti_armv7_common.h states the following:

/*
 * Our DDR memory always starts at 0x80000000 and U-Boot shall have
 * relocated itself to higher in memory by the time this value is used.
 * However, set this to a 32MB offset to allow for easier Linux kernel
 * booting as the default is often used as the kernel load address.
 */

So when ARCH_OMAP2PLUS is defined, we'll default CONFIG_SYS_LOAD_ADDR
to 0x82000000.  However some boards manually defined theirs differently

Boards who used OMAP34XX_SDRC_CS0 + 0x02000000 were left to the default
Boards who used OMAP34XX_SDRC_CS0 are at 0x80000000 and any boards who
had other values were automatically ported with the moveconfig tool.


Adam Ford (1):
  Convert CONFIG_SYS_LOAD_ADDR to Kconfig

 Kconfig                         | 6 ++++++
 arch/arm/mach-omap2/Kconfig     | 3 +++
 configs/am3517_crane_defconfig  | 1 +
 configs/am3517_evm_defconfig    | 1 +
 configs/brppt1_mmc_defconfig    | 1 +
 configs/brppt1_nand_defconfig   | 1 +
 configs/brppt1_spi_defconfig    | 1 +
 configs/brxre1_defconfig        | 1 +
 configs/cm_t35_defconfig        | 1 +
 configs/cm_t54_defconfig        | 2 +-
 configs/dra7xx_evm_defconfig    | 2 +-
 configs/dra7xx_hs_evm_defconfig | 2 +-
 configs/draco_defconfig         | 1 +
 configs/eco5pk_defconfig        | 1 +
 configs/etamin_defconfig        | 1 +
 configs/mcx_defconfig           | 1 +
 configs/mt_ventoux_defconfig    | 1 +
 configs/nokia_rx51_defconfig    | 1 +
 configs/omap3_evm_defconfig     | 1 +
 configs/omap3_ha_defconfig      | 1 +
 configs/omap5_uevm_defconfig    | 2 +-
 configs/pxm2_defconfig          | 1 +
 configs/rastaban_defconfig      | 1 +
 configs/rut_defconfig           | 1 +
 configs/tao3530_defconfig       | 1 +
 configs/thuban_defconfig        | 1 +
 configs/ti814x_evm_defconfig    | 1 +
 configs/twister_defconfig       | 1 +
 28 files changed, 35 insertions(+), 4 deletions(-)

-- 
2.7.4